Categories

Best Pilot Hole Required

1/2\ Aircraft Counterbore, Carbide Tipped, (Reduced Shank Counterbore), 1/4\ Shank Diameter, 3 Flutes, 2 3/4\ OAL, (.5\ Diameter), 52216, USA Made

  • For counterboring and spotfacing in applications where machine requires a smaller shank.
  • 1/64" Corner Radius, Tool Diameter Tolerance: +.001"/-0". Shank Diameter Tolerance: +0"/-.001".
  • Pilot Hole Diameter:1/8, If using a pilot this is the shank diameter of the pilot you should choose.
  • Minimum Cut Diameter: .156" Because there is a pilot hole the tool will not cut below this diameter..
  • Set screw to hold a pilot or drill bit in place (if you are using a pilot or drill bit).
Check Stock

1 1/4\ Aircraft Counterbore, Carbide Tipped, (Reduced Shank Counterbore), 3/8\ Shank Diameter, 3 Flutes, 2 3/4\ OAL, (1.25\ Diameter, 1-1/4), 52240, USA Made

  • For counterboring and spotfacing in applications where machine requires a smaller shank.
  • 1/64" Corner Radius, Tool Diameter Tolerance: +.001"/-0". Shank Diameter Tolerance: +0"/-.001".
  • Pilot Hole Diameter:1/4, If using a pilot this is the shank diameter of the pilot you should choose.
  • Minimum Cut Diameter: .281" Because there is a pilot hole the tool will not cut below this diameter..
  • Set screw to hold a pilot or drill bit in place (if you are using a pilot or drill bit).
Check Stock

BOSCH HDG11 11-Piece Diamond Hole Saw Set, Blue

  • Vacuum-brazed diamond grit cuts faster and lasts longer.
  • AutoStart pilot bit is spring-loaded, retractable shaft allows walk-free cutting without a pilot hole.
  • Pilot bit offers unique grind that starts holes accurately every time.
  • Set includes: (1) mandrel, (1) AutoStart pilot bit, hole saws: (1) 1 4 inch, (1) 5 16 inch, (1) 3 8 inch, (1) 5 8 inch, (1) 1 inch, (1) 1-3 8 inch, (1) 2 inch, (1) 2-1 4 inch, (1) 2-1 2 inch.
Check Stock

Starrett KA19-N\Oops\ Arbor, Hole Enlargement Arbor

  • Replaces the pilot drill in any Starrett A1, A2 or A10 type arbors.
  • Replacing the pilot drill, the KA19 allows diameters to be enlarged by attaching a saw of the same size to that of the existing hole.
  • This saw then acts as the pilot for the larger diameter saw that is attached to the arbor in the normal way.
Check Stock

Flex-a-lite 508 Aluminum 1\ Fan Spacer

  • 1.75" bolt required for proper installation.
  • Features a standard 5/8" pilot hole for easy replacement.
  • Made of aluminum with a mill finish for lightweight durability.
Check Stock

KnKut 18 Piece National Course Tap/Drill Bit Set

  • No Center Punch or Pilot Hole required for drill bit.
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • ...it For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • ...it For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

5-1/2 Inch Diamond Hole Saw Drill Bit Ceramic Porcelain Glass Granite Marble Tile Tiling 5 1/2 Inches in 5 1 2 inch

  • Diamond Coated Hole Saw Drilling Holesaw Tool 5 1/2" - Larger Than 5 Inches.
  • EASILY Cuts Through Ceramic and Porcelain Tile - Glass, Marble, Granite, Quartz - USE WATER TO COOL.
  • Use with Any Electric Drill - Diamond Circular Hole Saw for Floor Drain, Shower, Shower Mixing Valve, Shower Drain Installation.
  • Drills 1 inch deep - Wet Type - Do not use dry - No Pilot Drill Bit - Pilots are not required.
  • Cylindrical Shank 3/8" - No Need for Adapters or Arbor.
Check Stock

VEVOR Concrete Hole Saw Kit, 1-2/11', 1-3/5', 2-9/16', 3-5/32', 3-15/16' Drill Bit Set SDS Plus & SDS MAX Shank Wall Hole Cutter w/a 4-1/3' Connecting Rod for Concrete, Cement, Stone Wall, Masonry

  • Hole Saw Tools in One Kit: Our concrete hole saw kit provides 10PCS, including 1-2/11" to 3-15/16"(30-100 mm) of hole saws, SDS PLUS and SDS MAX shanks, 2 pcs 4-1/3"(110mm) pilot drill bits. Easily store and carry our hole saw tool kit in our zip-up storage case made of aluminum..
  • 135° Sharp Pilot Drill Bit: The 135-degree pilot drill bit ensures you open the wall hole in precisely the right place every time. And the multi-edged blades of the hole saw are designed to make your drilling cleaner, faster, and more efficient. The chip removal hole can quickly remove dust, thus preventing clogging..
  • Premium Material: Hole saw for masonry is made of high-quality carbon steel. It is sturdy and durable. They are sharp enough to open the wall and wear-resisted. And the connecting rods with 40CR steel are rigid and not easy to break..
  • For most Hammer Drills: The shank of the connecting rod adopts SDS PLUS and SDS MAX design, which is compatible with four-hole and five-hole electric rotary hammer drills. They are compatible with hammer drills of Bosch, DeWalt, Hiltex, Makita, Goplus, etc..
  • Wide Application: This masonry hole saw can drill through common walls and floors made of brick, concrete, cement, and stone. It makes installing air conditioners, water pipes, ....
Check Stock

Bosch HSBIM9 General-Purpose 9 pc. Bi-Metal Hole Saw Kit

  • All-in-one kit – features two SpinLOCK Universal arbors, steel pilot bit and six hole saws with Progressor tooth design.
  • SpinLOCK universal arbor – fits all brands and sizes to simplify diameter changes with fast plug removal and tool-free install.
  • The pilot bit – designed to start holes in a variety of materials.
  • Progressor tooth design – hole saws feature alternating teeth size for performance, cutting faster and lasting longer in wood, metal and plastic materials.
  • Durable hole saw material – hole saws are made with 8% cobalt alloy.
Check Stock

Patioer Hole Cutter, 1-5/8" to 8" (40-200mm) Adjustable Hole Saw Cutter, with ABS Dust Shield for Recessed Lights, Ceiling Speakers, Vent Holes

  • Adjustable Hole Saw Cutter: This kit includes 1x adjustable hole saw with two replaceable pilot drill bits (1 x auger type self-feed pilot bit +1x HSS pilot bit), 2x high speed cutting blades,1x ABS dust shield, 1x adjustment hex wrench, 5x brad-point wood drill bits and 5x Masonry drill bits, 1x carpenter pencil, 1x 3m tape measure and 1x durable storage case..
  • Size Adjustable: Twin blade hole cutter for cutting 1-5/8" to 8" (40 - 200mm) holes to 8" (40 - 200mm) holes with depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides..
  • Application: It can be used to cut plywood, sheetrock, veneer, cement board, slate, ceiling tiles, etc. A practical tool set for carpenters, home decorators, contractors, professionals and DIY home owners..
  • Easy To Carry: The hole saw cutter comes with a sturdy carry case for easy storage and organize. Easy and convenient to carry. Improve work efficiency..
Check Stock

Redding Universal Flash Hole Deburring Tool [Misc.]

  • Comes shipped with a 30 caliber pilot stop for controlling depth.
  • Uses standard pilot stops for 3/16" mandrels.
  • Cases with flash holes measuring 0.080" 22 to 338 caliber.
Check Stock