Categories

Best Pin Barrel Extruder Machine

Anet Brushless DC Cooling Fan for 3D Printer Hot End, 2 Packs 40mm x 40mm x 10mm 4010 12V 2 Pin 3D Printer Fans Black

  • Cooling fan for 3D printer hot ends, extruder & so on..
  • 2Pin connector, wire length approx. 100cm / 39.4in..
  • Connector: 2 Terminal Connector with 2pin-ph2.5.
Check Stock

Creality Official Upgrade Extruder MK8 Extruder Alloy Block Bowden Extruder 1.75mm Filament for Ender 3 Series Ender 5/5 Plus/Pro CR-10 Series 3D Printer

  • COMPATIBILITY--- All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about....
  • UPGRADE METAL EXTRUDER---The upgrade Creality3D silver metal Bowden extruder is an update for the plastic extruder. Upgrade your Creality 3D Printer....
  • WORK BETTER--- the extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printers'....
  • EASY TO ASSEMBLE--- Our metal extruder kit includes all the necessary screws & parts needed, it can directly replace your old original fragile plastic....
  • OFFICIAL HIGH QUALITY--- Full metal aluminum alloy material makes our extruder kit more stable and durable. And it has stronger pressure pushing the....
Check Stock

Creality Official Ender 3 Extruder Upgraded and 1M Capricorn Bowden PTFE Tubing 1.75mm 3D Printer Accessories Kit with Bed-Level Spring & Tube Cutter, 4 in 1 Package for Ender-3 Series CR-10 Series

  • ✔️【Quality Assurance】Creality 100% official aluminum extruder is lightweight and strong, ensuring a more even feed rate over time as well as resisting wear. Removed pneumatic joint so as to increase gear density, it makes loading the filament easier and smoother. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed..
  • ✔️【Original Capricorn PTFE Tube】Capricorn PTFE is well regarded as the highest quality PTFE tubing in all 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hot end..
  • ✔️【Great Value Spare Parts】4pcs Upgraded bed-level springs are made of high-quality spring steel, fatigue and heat-resistant, durable for use. They will allow you to print at a higher speed without worrying about any wobble. One PTFE cutter with an extra sharp razor is also included to ensure that the tube is cut flat on both sides..
  • ✔️【Easy To Install】DIY kit and you need to assemble by yourself. The full installation kit for the extruder is include....
Check Stock

Official Creality 3D Extruder Feeder Drive MK-8 Aluminum Upgraded 1.75mm for CR-10 Ender 3 CR-10S (Black)

  • 【Upgrade Black Extruder】All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about filament scraping or breaking. This extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware..
  • 【Wide Application】The upgrade Creality3D silver metal Bowden extruder is compatible with nearly all models of 3D printers(Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro). No need to change stepper motors or other mounting hardware..
  • 【Very Easy to Install】 Unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. Our metal extruder kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame.
  • 【Durable】 All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
  • 【Official Creality Original Quality】This high-quality all-aluminum construction is guaranteed to last for years,....
Check Stock

BANCHELLE Spring Latch Pin Shed Latch 304 Durable Stainless Steel for Door Gate Van Container 2 Pieces (128 mm)

  • 2 Pieces sliding lock barrel bolt, installation: screwed in.
  • Spring Loaded Latch Pin Material: Solid T-304 premium-grade stainless steel, rust prevention.
  • Length: 128 mm/5.04 Inches, barrel diameter: 10 mm/ 0.39 Inches.
  • The cotter pin expands to prevent the pin from falling off, used for chests, door, gate, van, container, cabinets, trailer, truck, barn, closet, garage.
  • If any question, please feel free to let us know, thanks.
Check Stock

TE-CO 52306 Spring Plunger, Zinc, 1/2-13x1 1/4 L (Pack of 5)

  • Pull Pin - Round Handle - 3/8" Dia Plunger -3" Length x 1" Diameter WELDON Steel Barrel -Spring Loaded Plunger -Universal Fitness Equipment Adjustment Knob..
  • This spring loaded pull pin allows you to retract and engage the plunger for locating, fastening and quick change operations. It consists of a housing (barrel) and a plunger assembly. The plunger assembly screws into the housing..
  • The housing is designed to be welded into place for strength. Pulling on the handle retracts the plunger fully into the pin housing.
  • The pull up force is approximately 5 lbs..
Check Stock

SBDs (Pack of 1) POP Pull Pin 1/2\ Diameter Spring Loaded Steel Plunger - 1\ Diameter x 1-1/2\ Length Weld ON Steel Barrel - Jumbo Round Designer Hard Plastic Knob | Knurled Round lock Nut.

  • SBDs (Pack of 1) POP Pull Pin 1/2" Diameter Spring Loaded Steel Plunger - 1" Diameter x 1-1/2" Length Weld ON Steel Barrel - Jumbo Round Designer Hard Plastic Knob | Knurled Round lock Nut..
  • * Spring-loaded pull pin for locating, fastening, and quick change operations. This spring loaded pull pin allows you to retract and engage the plunger for locating, fastening and quick change operations. It consists of a housing (barrel) and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle retracts the plunger fully into the pin housing. Releasing the handle allows the plunger to extend..
  • The plunger pull up force is approximately 5 to 10 lbs. The Barrel has Solid round housing for Weld-On. Can be Painted or Powder Coated..
  • Heavy duty spring action pins , used for height and length adjustments on racking systems, fitness and rehabilitation equipment and many other uses..
Check Stock

5 Inch Spring Loaded Latch Bolt, Heavy Duty Spring Loaded Latch Pin Door Lock,1/2\ Pin Shed (2, Black)

  • 1.Premium Material: This spring loaded latch pin is constructed of carbon steel for protect against corrosion & rust. Bolt Diameter: 3/8" inch.
  • 2.Safety and Privacy: Barrel bolt designed for security applications on doors, gates, cabinets, Padlock able for greater security.
  • 4.4 Directions: Use on left, right, vertical or horizontal hand applications.
  • 5.Widely use: barrel bolt designed for security applications on Doors,Rear Gate,Chests,Cabinets,Utility Trailer,or Lock Pin.
Check Stock

Kare & Kind Set of 9 pcs Smart Dough Tools Kit with Extruder Machine/Extruder Tools (Extruder Machine + Extruder Tools)

  • Dough Tools Kit: 9 pieces in one set (Extruder Machine and Extruder Tools). All of them are assorted color..
  • Perfect for creative play with Easy-grip, Great for Hours of fun..
  • Created by experts for use at home or classrooms. Enriches a child's imagination. Ideal for early learning classrooms or daycares.
  • Exceptional quality and value. These sets are great for adding detail to dough creations..
  • Bonding clay is not included. With Kare and Kind retail packaging..
Check Stock

Bowden Extruder V2.1 RNC Nano Coated Gear DDB Universal Geared Extruder for 3D Printer

  • Kit includes: 1pc Universal Geared Extruder w/ RNC Nano Coated Gear, 1pc Screws package, 1pc Installation tools package, 1pc Stepper motor mounting bracket.
  • Upgraded High performance extruder for 3D Printer.
  • Upgrade Highlights: 1. The position of the gears and the accuracy of all screw holes are calibrated. 2. Modified the new buckle, both sides of the V2.1 version of the DDB extruder support filament running thru in and out (it has no specified direction, and you are able to use either side of the material ports).
  • 3. The filament has an independent motion cabin inside the extruder. The new white filament guide inside the extruder is helping the filament running smoothly. 4. The new outer shell design with edge cut on the top of the extruder is reserved for the screw rod of Ender 3 printer. 5. Upgraded shell using new mixed materials.
  • ***Please make sure Gears are Installed and Precisely Aligned before printing, they will perform successfully.
Check Stock

Official 3D Printer Extruder Upgraded Aluminum Drive Feed Extruders Accessories for 3D Printer 1.75mm Filament Works with Creality CR-10 Series Ender 5 Series Ender 3 Series

  • ✔️Durable Material -- High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term....
  • ✔️New Upgraded Design -- The upgraded red extruder has removed pneumatic joint so as to increase gear density, preventing the joint fracture....
  • ✔️Improved Performance -- The optimized extruder with metal extrusion and original hot-end kit pushes the filament into printer nozzle, greatly....
  • ✔️Install Easily -- You just remove the old Creality extruder & screw and then install the new red extruder. All the necessary accessories are....
  • ✔️Wide Compatibility -- Red extruder is suitable for Creality 3d printers accessories: Ender-3 series, Ender-5 series, CR-10S, CR-10, CR-10mini,....
Check Stock

Cra-Z-Art Disney Junior Minnie Mouse Deluxe Kitchen Set

  • Kids will love making pretend Minnie Mouse treats with the colorful Softee Dough, rolling pin, dough cutters and other accessories.
  • This Minnie Mouse kitchen supports kids creative play while engaging important fine motor skills and STEM and STEAM creativity.
  • Kitchen molding set includes: kitchen unit, 3 bright Softee Dough colors, molds, extruder, and dough accessories.
  • Softee Dough is clean, easy to use, and non-toxic.
Check Stock

5Aplusreprap Upgraded Dual Gear Extruder Single Connector for Creality Ender 3 CR10 / Pro CR-10S 3D Printer 1.75mm Filament (2 x Extra Gears), Right Hand

  • Package Include: Single connector upgraded dual gear extruder right-handed 1 Set - extruder aluminum block DIY kit with 4pcs quality stainless steel gears.
  • Main Material Instruction: Material for extruder: Aluminum Alloy . Material for the gear in extruder kit : Stainless Steel. For filament: 1.75mm.
  • Advantages: This is an upgraded version of CR10 extruder. A newly added extrusion wheel makes the filament feed more stable. The design of the double-concave gear also reduces the embossing of the consumables by the extrusion wheel..
  • Features: The mould steel spring is very rigid, strong in pressure and very durable..
  • Tips: For most Ender/CR Series 3D Printers, please choose the right-handed extruder..
Check Stock