Categories

Best Pin Header Connector

upHere 3-Pack High Airflow Quiet Edition White LED Case Fan pwm 4in for PC Cases T4WT4-3

  • PC fan splitter Y cable connects 2 computer case fans to a single motherboard fan header.
  • 1 to 2 case fan splitter connects an additional fan to....
  • Mobo 4 pin fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using....
  • Master / slave PWM splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed....
  • Double CPU fan splitter adds 4 fans with the Cost-effective 2-pack of fan header splitter.
  • Sleeved and wrapped black 4-inch PWM Y cable provides a....
  • 3-pin & 4-pin fan compatible with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler....
Check Stock

Cable Matters 2-Pack 2 Way 4 Pin PWM Fan Splitter Cable - 4 Inches

  • PC fan splitter Y cable connects 2 computer case fans to a single motherboard fan header.
  • 1 to 2 case fan splitter connects an additional fan to increase airflow in your computer case.
  • Mobo 4 pin fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using software from a motherboard equipped with PWM control.
  • Master / slave PWM splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
  • The computer fan splitter omits the RPM signal pin for tandem fan speeds with both fans.
  • Double CPU fan splitter adds 4 fans with the Cost-effective 2-pack of fan header splitter.
  • Sleeved and wrapped black 4-inch PWM Y cable provides a tidy look in an open computer case.
  • 3-pin & 4-pin fan compatible with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler Master Blade Master 80 / Master 92, Cooler Master Hyper 212 EVO 120mm, Cooler Master JetFlo 120mm, Cooler Master SickleFlow 120mm, Cooler Master MegaFlow 200mm, Noctua NF-F12, Thermaltake WATER 3.0 Dual 240.
Check Stock

Monoprice SCSI (HPDB) 68 Female to IDC 50 Female Adapter (100076)

  • The IDC 50 connector is a 50-pin 8-bit SCSI "header" connector used for internal-type ribbon cables.
  • It is also known as the "Alterative 2" connector.
  • It has parallel 25-pin rows and resembles an older ATA/IDE drive cable except that it is wider and has more pins.
  • The HPDB 68 connector is a 68-pin 16-bit SCSI-2 connector used for both internal and external connections (plastic for internal and metal for external).
  • It has parallel 34-pin rows but has the pins much closer together and is therefore narrower than the IDC 50 connector.
Check Stock

Cooler Master 1-to-5 ARGB Splitter Cable / 5V - Support 3-pin Addressable RGB - LED Sync Cable for MasterFan/MasterLiquid ARGB Series Support(ARGB 1-to-5 Splitter)

  • Cooler Master 1-to-5 ARGB Splitter Cable，NOT support 12V RGB, Only support 5V RGB.
  • Support 3-pin Addressable RGB - LED Sync Cable for MasterFan/MasterLiquid ARGB Series Support.
  • 3-pin ARGB Header compatibility,2ft/60cm Long and flexible material makes it easy for cable routing. Keep it effortless and hassle free..
  • NOTE: 1. (DO NOT connect an Addressable RGB(ARGB/Digital RGB +5V) Fan to a Non-Addressable RGB(Standard +12V) motherboard header or RGB controller. 2. Beyond the look, Cooler Master provides quality. With high quality material, keep your build reliable and flawless. Certified Compatible with Asus Aura, ASRock RGB, Gigabyte Fusion, MSI RGB..
  • Splitter: - Connection Type: Straight Through Wiring (Passive Wiring) - Connector A: 3-pin RGB LED Connector Female - Connector B: 3-pin RGB LED Connector Male.
Check Stock

USB 3.0 Motherboard Adapter Cable 20 Pin Header Convert to Two Female A Type Lead for DIY Gaming PC 25cm

  • Connector Type : USB 3.0 internal motherboard 20/19 Pin header female to Two USB 3.0 A Female (PCI bracket Excluded).
  • This adapter provides a single standard USB 3.0 female connection, connecting USB 3.0 devices to the motherboard like Asus Sabertooth 990FX, plug and....
  • This USB 3.0 cable can be installed into a standard PC slot and will be connected internally to any USB 3.0 20 pin header socket. It expands your....
  • 2 ports USB 3.0 Type A female to motherboard header adapter cable, superspeed USB3.0 extension code, USB 3.0 female port backwards compatible with USB....
  • NOTE: The Y shape cable has 19 pins but the connector has 20 holes, one hole is unused. Length : 25cm (include connector).
Check Stock

DEEPCOOL CF120 3IN1 Addressable RGB Motherboard SYNC by 5V ADD RGB 3-pin Header SYNC with Other ADD-RGB Devices Cable Controller Available 3x120mm PWM Fans

  • If your motherboard has ONE 5V 3-pin ADD-RGB header, you can use it to connect RGB extender cable to control and SYNC these three fans and one more....
  • If your motherboard does not have 5V 3-pin ADD-RGB header, you can use the included cable controller to connect the RGB extender cable to realize SYNC....
  • Fan speed can be intelligently controlled by motherboard in accordance with temperature.
  • Utilize 12pcs of independently programmable RGB LEDs for amazing display effects.
  • Fan Connector: 4Pin. LED Type: Addressable RGB LED. LED Connector: 3pin (+5V-D-G). LED Control: motherboard with 5V ADD-RGB Header. Cable controller....
Check Stock

YOUKITTY PWM Fan Splitter, 4-Pin Adapter Cable Y Splitter PC CPU Fan Splitter PC 4-Pin Fan Extension Power Cable 1 to 4 Converter 10 inch (2 Pack)

  • Connector 1: 4-pin female connector port..
  • Connector 2: 4-pin male connector (1 of which is 4-pin and 3 of which are 3-pin)..
  • Compatibility: the cable is compatible with all 4-pin and 3-pin chassis fan coolers and with 4-pin and 3-pin PMW fan connectors..
  • Functionality: a 4-pin female connector on one end connects to the motherboard port and a 4-pin male connector on the other end (1 of which is 4-pin and 3 of which are 3-pin) allows 4 computer case fans to be connected to a single motherboard fan header, with the fan distributor cable providing additional fans to increase airflow in your computer case..
  • Parameter specifications: Length 10 inches (25 cm) (approx.). Quantity: 2 pieces..
Check Stock

FFB1212EHE-F00 120 x 120 x 38mm Cooling Fan, 190 CFM, 4000 RPM, 59 dBA, 17.78 air pressure, 3 pin Tach connector, Combo Set of 3 Pieces, Ship from USA !!

  • Air Flow: 190 (Mini. 170.92) CFM or 5.38 (Mini. 4.84) Cubic Meter per minute.
  • Air Pressure: 17.78 (Mini. 14.30) mmH2O or 0.70 (Mini. 0.563) inchH2O.
  • Rated Input Voltage: 12VDC, Operating Input Voltage: 7 – 13.2VDC, Input Current: 2A (Max. 3A).
  • 3-pin connector with speed (Tach) sensor – Caution: the 3-pin header must provide a minimum of 3A of power in order to power this fan so please check if your motherboard’s 3-pin header can provide enough power and if the header might overheat. We suggest using a fan controller with enough power, or purchase the same fan in the 4-pin molex + 3-pin connector version so you can power the fan directly from a power supply but without the ability to control the fan speed..
Check Stock

LINKUP - [Active Chip] USB 3.0 (3.1 Gen 2) Internal IDC 20 Pin Motherboard Header to A-Key (Type-E) 20 Pin Female Converter for Type C Panel Mount Adapter

  • ...all USB 3.0 20 pin motherboard headers by standard specification. A small number of motherboards do not use standard USB 3.0 20 pin headers which may cause the adapter to get stuck in the socket..
  • …Forceful removal of the adapter may cause the header socket to be damaged, LINKUP is not responsible for such damage. Connector 1 (Motherboard) - USB 3.0 Internal IDC 20 Pin MB Male Housing Header. Connector 2 (Front Panel) - USB 3.1 A-Key 20 Pin Front Panel Female Header / NOTE: Does not convert from 5GB/s to 10GB/s. Not compatible with USB 2.0 motherboard IDC connector.
  • Active chipset enables full USB-C features, preserves the functions of Channel Configuration pins (CC1&CC2).
  • including attach/removal detection, plug orientation detection, and current advertisement. Also the communications required by the Power Delivery and Alternate Mode..
  • Recommended to be used with LINKUP - USB-C Type Panel Cable Mount Motherboard Header Extension Adapter (B07THC8ZVF). May not fit ITX motherboard in an ITX case due to not having enough space. 【LINKUP Cares】 Backed by a LINKUP Limited 1-Year Warranty and Complimentary Premium Online Support..
  • Note on USB current over limit issue: The power from the USB 3.0 header on the motherboard has a power rating at 4.5W (0....
Check Stock

Phanteks PH-DRGBLED_COMBO_01 Digital RGB LED Strip Combo Set 2x 400mm 1x M/B adapter ASUS/MSI compatible Retail (Works only with DRGB boards)

  • Input : 3 pin female, Compatibility : Phanteks 3 pin connector / M/B 3 pin DRGB Header (+5V,DATA,N/A,GND).
  • Connector : Extension: male to female extension cable M/B Adapter: Digital RGB adapter 3pin (+5V,Data,N/A,GND).
  • Phanteks Digital RGB LED strip has integrated magnets in the silicone housing allowing for easy installation to the metal chassis. For a really secure fit, our strip includes double-side 3M tape..
  • With our 1 orientation connector, you can rest assure that the connectors are in the right position. The Digital RGB strip is also chainable so you can expand the length by adding more light strips..
  • The Digital RGB Strips Combo Set comes with a Digital RGB LED adapter that allows the Digital RGB strips to work with motherboards only that features a Digital RGB Pin header (+5V, DATA, NA, GND)..
Check Stock

GIGABYTE GA-M68MT-S2P AM3 NVIDIA GeForce 7025/nForce 630a chipset Micro ATX AMD Motherboard

  • CPU: Support for AMD AM3/Phenom II/Athlon II processor. Chipset: NVIDIA GeForce 7025/nForce 630a chipset.
  • Memory: 2 x 1.5V DDR3 DIMM sockets supporting up to 8GB of system memory, Dual channel memory architecture, Support for DDR3 1333(OC)/1066/800 MHz memory modules.
  • Audio: Realtek ALC889 codec, High Definition Audio, 2/4/5.1/7.1-channel. LAN: Onboard Realtek RTL8211CL (10/100/1000Mbit).
  • Expansion Slots: 1 x PCI Express x16 slot, running at x16. 2 x PCI Express x1 slots. 1 x PCI slot.
  • Storage Interface: 4x SATA 3Gb/s connectors. Support for RAID 0, RAID 1, RAID 5, RAID 10 and JBOD.
  • Internal I/O Connectors:1 x 24-pin ATX power connector/1 x 4-pin ATX 12V power connector/4 x SATA 3Gb/s connectors/1 x CPU fan header/1 x system fan header/1 x front panel header/1 x front panel audio header/3 x USB 2.0/1.1 headers/1 x parallel port connector/1 x clearing CMOS jumper.
  • Back Panel Connectors:1 x PS/2 keyboard port/1 x PS/2 mouse port/1 x serial port/1 x D-Sub port/4 x USB 2.0/1.1 ports/1 x RJ-45 port/3 x audio jacks (Line In / Line Out / MIC In).
Check Stock

Winncon PWM Fan Splitter Cable 1 to 2 Converter, Black Case Fan Splitter Cable, Case Fan Power Duplicator Converter, Dual Case Fan Power Adapter, 10.6 inch (1 Pack)

  • ❤One Divinded into Two: one 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
  • and one 3 pin fan connector omits the RPM signal pin for tandem fan speeds with both fans.
  • ❤Keep Same Speed: 4-Pin receptacle connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using software from a motherboard equipped with PWM control.The fan adapter is compatible with 3-pin and 4-pin PC fans..
  • ❤Increase Airflow: This PWM fan splitter cable connects 2 computer case fans to a single motherboard fan header to increase airflow in your computer case, adding ventilation and regulating the fan speed in a computer case ..
  • ❤High quality: The cooling fan cable is covered with fine plastic for long-term years’ use. High quality high density black sleeved able, 24AWG, and the length is about 10.6 inch (27cm)..
  • ❤This Dual Case Fan Power Adapter is compatible with popular brands of computer case cooling fans, and can be used for a motherboard 4pin interface powering for multiple cooling fans and PWM speed control, lengthen and extend the motherboard 4-pin interface..
Check Stock

Smraza 100pcs Double Sided PCB Board Kit, Prototype Boards for DIY Soldering and Electronic Project Circuit Boards Compatible with Arduino Kits, 30PCS 40 Pin 2.54mm Male and Female Header Connector

  • Selection of Multi-Sized Proto Boards - 30 pieces double-sided prototype boards of 4 different size to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects. （10 pieces 2*8cm, 10 pieces 3*7cm, 5 pieces 4*6cm and 5 pieces 5*7cm PCB boards.
  • Header Connector - 10 pieces 40 pin male header, 10 pieces 40 pin pitch right angle male headers, 10 pieces 40 pin female header.
  • pitch: 2.54mm, single row and straight connector.
  • Screw Terminal Block - 5 pieces 5.08-301-2P and 5 pieces 5.08-301-3P.
  • pitch: 5.08mm, rated voltage: 300V, rated current: 16A..
  • Jumper caps - 30 pieces standard 2.54mm pin spacing circuit board jumper cap in 6 colors, 5 pieces per color..
  • Environmental and Elegant Packaging - Compact paper package take little footprint..
Check Stock