Categories

Best Pin Length

LainKeen 30°& 80° Push Pin Plier Set, Angled Pliers Fastener Remover Tool Rivet Puller

  • 30 and 80-degree Remove Push Pins Pliers Makes getting the push pin out easy without damaging the edges or slipping and marring your vehicle surface..
  • Plier fits into the pin slot and under the center pin.
  • 1.25” (3.2cm) maximum jaw opening with handles length 3.14” (8cm) apart.
  • 6.69” (17cm) overall length. 30-degree angled tip.
  • 1.37” (3.5cm) maximum jaw opening with handles length 3.14” (8.5cm) apart.
  • Drop forged high carbon steel and heat treated for strength and durability. Black finishing increase rust resistant. PVC handles for anti-slip and comfort grip..
  • Spring-loaded design keeps pliers open for ease of use. Simply squeeze handles together for a firm grip on your pliers. and the ergonomic handle prevents hand fatigue during long term use..
  • We will provide the best service. 7*24 hours online service. If there are any problem with our Body Clip Plier Set ,please feel free to contact us..
Check Stock

ABN Trailer Tow Hitch Lock Pin and R-Clip, 4in x 3/8in – For Towing Cargo, Boat, RV, Car, Truck, Bike, ATV

  • USE YOUR HITCH: Replace old pins and hitch up anything with the ABN Trailer Tow Hitch Lock Pin and R-Clip, 4" x 3/8" Inch – For Towing Cargo, Boat, RV, Car, Truck, Bike, ATV.
  • No more struggling to get out those pins, because this hitch pin makes coupling implements and machinery an easy task.
  • PERFECT SIZE: 4-inch (10.2cm) usable length.
  • 6.75-inch (17.1cm) overall length (shaft and handle included).
  • 0.4-inch (10mm) length from pin hole to flat shaft end.
  • Hole for the clip has 0.2-inch (4mm) diameter.
  • GRIP COMFORTABLY: Vinyl coated handle can be gripped and used for pulling force (easier than bent pin design with no leverage available).
  • Attractively bright red handle makes it easy to find when not in use.
  • BUILT TO LAST: Constructed from high-tensile steel and is heat-treated with a powder-coated black finish for long life against weathering.
  • PACKAGE CONTENTS: Package includes (1) hitch pin tool with handle and (1) hitch pin R-clip (hairpin spring cotter bridge pin) for your convenience.
Check Stock

ATX CPU 8 Pin Power Extension Cable CPU 8 Pin Female to 8(4+4) Pin Male EPS-12V Extension Cable for Motherboard 32 Inches TeamProfitcom

  • Connector 1: standard ATX CPU 8 pin EPS-12V female (connect to power supply 8 pin EPS).
  • Connector 2 : EPS-12V 8(4+4) pin male (connect to Motherboard 8(4+4) pin EPS).
  • This cable is compatible with ALL power supplies !!!.
  • EPS 8 Pin Power Extension Cable features one ATX CPU 8 Pin 12V female connector and one 8(4+4) Pin ATX 12V male connector, extending your cable length from the power supply to the CPU motherboard by 32-inches.
  • Length :32 inshes, Gauge:standard 18 AWG - UL1007 , Max Rated power : 500W.
Check Stock

GM Genuine Parts D1539J Brake Light Switch

  • 12 awg tinned copper wires for Pin 30, Pin 87. Length: 5.1in.
  • 16 awg tinned copper wires for Pin 85, Pin 86. Length: 5.1in.
  • 12-volt relay (max 14-volt). 40a/30a High switching capability.
Check Stock

4-Pin Molex to 2 x 3-Pin or 4-Pin Computer PC Case Fan Y-Splitter Adapter Cable, 3pin / 4pin to Molex PC Cooler Cooling Fan PMW Sleeved Splitter Y Power Connector, 2-Pack

  • Please note this 4-Pin Molex is actual 2-Pin but it still works fine on your computer, because only 2-pin in connector required for fixed Molex operated voltage of 12V.
  • Power up to two 3-Pin/4-Pin PC case fans with a Molex connector.
  • Cable Length is 22cm / 8.66inch, not includes all connectors length.
  • Quality high density black sleeving for all black appearance.
  • 4-Pin Molex to 2 x 3-Pin or 4-Pin Computer PC Case Fan Y-Splitter Adapter Cable, 3pin / 4pin to Molex PC Cooler Cooling Fan PMW Sleeved Splitter Y Power Connector, 2-Pack.
Check Stock

CPU 8 Pin Power Extension Cable ATX CPU 8 Pin Female to 8(4+4) Pin Male EPS Extension Cable for Motherboard (Not PCI-e VGA) 12 Inches (2 Pack) TeamProfitcom

  • Connector 1: standard ATX CPU 8 pin EPS-12V female (connect to power supply 8 pin EPS).
  • Connector 2 : EPS-12V 8(4+4) pin male (connect to Motherboard 8(4+4) pin EPS).
  • This cable is compatible with ALL power supplies !!!.
  • EPS 8 Pin Power Extension Cable features one ATX CPU 8 Pin 12V female connector and one 8(4+4) Pin ATX 12V male connector, extending your cable length from the power supply to the CPU motherboard by 12-inches ( This cable NOT pci-e 8 pin ).
  • Length :12 inshes, Gauge:standard 18 AWG - UL1007 , Max power rating: 500W.
Check Stock

(2-Pack) COMeap GPU PCI Express Power Extension Cable PCIe 8 Pin Female to 8 Pin(6+2) Male Adapter 9-inch(23cm)

  • 『Solution』Providing a convenient solution for extending the connection length from PCIe cable to GPU.
  • 『PCIe 8P Extension』PCIe 8 pin female end to plug into the PCIe 8 pin male connector of PCIe cable and 8 pin(6+2) male end to plug into the video graphics card (8 pin (6+2) end could be used as 6 pin or 8 pin end by sliding on/off the 2 pin).
  • 『Compatibility』Compatible with 6-pin & 8-pin graphics cards from popular manufacturers such as: ASUS, ASRock, EVGA ,Gigabyte, Radeon, Sapphire, NVIDIA Tesla, etc..
  • 『Parameter』Length(including connectors): 9-inch(23cm), Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 2pcs, Self-adhesive tape*1pcs.
  • 『Note』This cable was only designed for graphics card (GPU), not motherboard or CPU. It will be damaged and burned once you connect it to motherboard or CPU and we won’t take any responsibility for wrongly using or installing. Please contact us if you have any questions.
Check Stock

4 Pin 16.5Ft Dash Cam Rear View Backup Camera Reverse Car Recorder Cable Extension Cord (4-pin 16.5ft)

  • Original design, perfect match the rear camera cord.
  • Length of this dash cam extension cord is 16.5ft（5m).
  • This extension cord works for Backup Camera, Dash Cam rear view camera.
  • 4Pin /5Pin /6Pin /8Pin different length of backup camera extension cord by YQMAJIM.
Check Stock

HAJXZH Toilet Seat Hinge Fixing Parts 2 Pieces Full Set Toilet Seat Hinge Fixings for to Replace The Fixing Parts of The Toilet Seat Hinge Screw Nut Bolt

  • Size: total length 3.11inch*pin length 1.18inch*pin diameter 0.31inch (total length 79mm*pin length 30mm*pin diameter 8mm)..
  • Material: high-quality zinc alloy hinge + rubber kit + stainless steel screws, fine workmanship, long service life, sturdy and durable..
  • Purpose: The toilet seat screw is a general-purpose product, suitable for most households..
  • Design: Suitable for damaged or old toilet seat hinges, easy to install, convenient and quick, suitable for all skill levels, and durable..
Check Stock

Diagnostic Connector, 3 Pin to 16 Pin OBD 2 Auto Car Diagnostic Adapter Connector Cable for Honda

  • 【3 Pin to 16 Pin OBD2 Cable 】 This 3 Pin to OBD II 16Pin connector cable, could connect to the car reader for car inspection. This is a brand new data link cable, used specifically for connecting your OBD2 scanner and your vehicle with this 16pin connector.
  • 【 Perfect Compatibility 】The OBD2 adapter cable is well suitablefor Honda 3 pin male connector.
  • OBDII 16 pin female connector. Perfect link your car interface and diagnostic interface and can work on most Honda vehicles with a 3 pin female interface diagnostic connector.
  • 【 Long Durability】This diagnostic cable is constructed from high-strength metal, ensure maximum reliability and durability for long lasting usage.
  • 【 Superior Flexibility 】Professional manufacturing, superior flexibility, stable characteristic and high reliability. Plug and Play, no driver needed. Color: Black.
  • 【Plug and Play 】Plug and Play, no driver needed. Length: 30.5cm / 12inch. We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care.
Check Stock

Ebuns Rolling Pin for Baking Pizza Dough, Pie & Cookie - Essential Kitchen utensil tools gift ideas for bakers (Traditional Pins 10" inch Barrel)

  • ????18″ inch Rolling Pin total length with a 10″ inch barrel and 2.5 inch diameter.????.
  • ????Perfect size and length for rolling your dough and storing away.????.
  • ????Hand Crafted and finished Waxed barrels, easy-grip, for a lifetime of smooth rolling.????.
  • ????To clean the rolling pin wipe it with a clean cloth. Don’t soak a rolling pin or run it under water.
  • the water can hurt the wood. If dough is stuck to the pin, flour the pin lightly, then brush the flour and dough off the pin with a towel. Use a soft brush to clean a textured pin.????.
  • ????Great kitchen utensil gift ideas for bakers and made For A Lifetime????.
Check Stock

GREX P6/15L 23 Gauge 5/8-Inch Length Headless Pins (10,000 per box)

  • 23 Gauge galvanized and coated headless pins.
  • Designed to use with P630, P635, P645, P645L, P650 and P650L Grex pinner.
  • Precision drawn wire assures consistent accurate pin optimized tensile strength for each pin length.
  • Durable yet flexible collation minimizes strip fragmentation.
  • 23-Gauge galvanized and coated headless pins are designed to use with p630, p635, p645, p645l, p650 and p650l grex pinner.
  • Precision drawn wire guarantees consistent accurate pins.
  • Optimized tensile strength for each pin length.
Check Stock

GREX P6/30L 23 Gauge 1-3/16-Inch Length Headless Pins (10,000 per box)

  • 23 Gauge galvanized and coated headless pins.
  • Designed to use with P630, P635, P645, P645L, P650 and P650L Grex pinner.
  • Precision drawn wire assures consistent accurate pin optimized tensile strength for each pin length.
  • Durable yet flexible collation minimizes strip fragmentation.
  • 23-Gauge galvanized and coated headless pins are designed to use with p630, p635, p645, p645l, p650 and p650l grex pinner.
  • Precision drawn wire guarantees consistent accurate pins.
  • Optimized tensile strength for each pin length.
Check Stock