Categories

Best Pin Trolling Motor Plug

Marinco 2018BP-24 4-Wire 12/24V Trolling Motor Plug, Black

  • Jumper Internally To Supply 12V And 24V Power To The Trolling Motor.
  • 4-Wire Trolling/Charging System Eliminates The Need For A Charge/Run Switch.
  • Install The Receptacle On The Boat, Mount The Black Plug On The Trolling Motor And The Red Plug On The Leads Of The Battery Charger.
Check Stock

GaiRen 2 Pin 50Amp Trolling Motor Plug Receptacle Set, 12/24/36/48 Volt Marine Boat Power Waterproof IP67 Connector Trolling Boat Plug for Trolling Motors Compatible with 6/8 AWG wire Red

  • 【Wide Applicability】The marine trolling motor plug receptacle are universal design for 2-wire configuration 12V, 24V, 24/36V, 12/24V, 36V or 48V systems up to 50A continuous rating. Compatible with 6/8/10 AWG large gauge wire without overheating..
  • 【Essentials for Trolling Motors】The trolling motor plugs and sockets are designed for harsh marine environments, and are ideal for trolling motors, lowering devices, electric fishing reels or any other DC-powered equipment..
  • 【Convenient】Marine plug and receptacle has the best design, which is very easy to use and self-locking. You will feel easy to use this plug because of the ergonomically contoured handle design. This set adopts direct insertion systems. Time and effort saving..
  • 【Safe and Stable】There are waterproof sealing caps and gaskets in the container to further strengthen the waterproof performance, provide additional safety guarantee, and ensure the fastening effect to prevent vibration..
  • 【Maximum Durable】 You will see the Corrosion-resistant, Brass gold-plated electrical components. The trolling motor plug a....
Check Stock

Minn Kota 1854021 MKA-21 Composite Quick Release Bracket (Terrova and PD Motors)

  • Allows trolling motor to be quickly removed from and reattached to boat deck.
  • Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck.
  • Composite construction resistant to rust, corrosion, and discoloration.
  • Includes stainless steel mounting hardware and locking pin.
Check Stock

Pro Controll EZ Mount II Bow Mount Trolling Motor Bracket

  • UNIVERSAL REPLACEMENT: A universal bracket that converts transom mount trolling motors to bow mount in minutes.
  • Fits most Jon or Utility boats with gunnels or toprails less than three inches wide and one inch deep..
  • STRONG & STURDY: Built to mount trolling motors up to 60 lb thrust.
  • Indestructible fiberglass reinforced nylon.
  • FAST & EASY SET UP: Installs quickly with a small hammer and punch to remove and replace pin.
  • Spend less time assembling and more time fishing.
  • ULTIMATE VERSATILITY: A trolling motor mounting bracket with choices.
  • EZ Mount 2 lets you install your transom mount motor anywhere on the boat.
  • Built with the needs of the Angler in mind.
Check Stock

Minn Kota Endura C2 55 Freshwater Transom Mounted Trolling Motor (36' Shaft)

  • Lever Lock Bracket: This solid 10-position bracket features a quick-release lever lock and reinforced composite material that resists flexing, warping, and UV damage.
  • Telescoping Tiller: Get easy, comfortable, intuitive operation of your trolling motor with the six-inch telescoping tiller..
  • 5 Fwd/3 Rev Speed Settings: Five speed settings for forward and three speed settings for reverse..
  • Power Prop: For 3-1/4" motor diameters, this prop delivers extra power to push throw heavy vegetation. Includes prop pin, nut and washer..
  • Indestructible Composite Shaft — for Life: At the core of your Minn Kota trolling motor is an indestructable composite shaft. It's a Minn Kota exclusive, and we it for life..
Check Stock

Minn Kota Endura C2 50 Freshwater Transom Mounted Trolling Motor (36' Shaft)

  • Lever Lock Bracket: This solid 10-position bracket features a quick-release lever lock and reinforced composite material that resists flexing, warping, and UV damage.
  • Telescoping Tiller: Get easy, comfortable, intuitive operation of your trolling motor with the six-inch telescoping tiller..
  • 5 Fwd/3 Rev Speed Settings: Five speed settings for forward and three speed settings for reverse..
  • Power Prop: For 3-1/4" motor diameters, this prop delivers extra power to push throw heavy vegetation. Includes prop pin, nut and washer..
  • Indestructible Composite Shaft — for Life: At the core of your Minn Kota trolling motor is an indestructable composite shaft. It's a Minn Kota exclusive, and we it for life..
Check Stock

Attwood 8M4000953 Trolling Motor Power Plug, 2-Prong, Connects With 12-Volt, 24-Volt or 36-Volt Motors

  • Power plug provides a solid, safe connection for trolling motors.
  • Included components: End Product & Information.
Check Stock

Minn Kota 1854023 MKA-23 Ultrex Fortrex Maxxum Edge Trolling Motor Quick Release Bracket Black Composite

  • Allows trolling motor to be quickly removed from and reattached to boat deck.
  • Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck.
  • Composite construction resistant to rust, corrosion, and discoloration.
  • Includes stainless steel mounting hardware and locking pin.
  • Compatible with Ultrex, Fortrex, Maxxum, and Edge. NOTE: Not for use with 72" shaft length motors..
Check Stock

Minn Kota 1854017 RTA 17 Riptide Terrova, Riptide PowerDrive V2 Compatible Quick Release Bracket Motor Mount, White Composite

  • Allows trolling motor to be quickly removed from and reattached to boat deck.
  • Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck.
  • Composite construction resistant to rust, corrosion, and discoloration.
  • Includes stainless steel mounting hardware and locking pin.
  • Compatible with Riptide Ulterra, Riptide Terrova, Riptide ST, Riptide PowerDrive, and Riptide SP.
  • NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72” or longer.
Check Stock

Minn Kota 1854035 MKA-16-03 Ulterra, Terrova, PowerDrive Trolling Motor Quick Release Bracket & Attwood 8M4000953 Trolling Motor Power Plug, 2-Prong, Connects With 12-Volt, 24-Volt or 36-Volt Motors

  • Product 1: Allows trolling motor to be quickly removed from and reattached to boat deck.
  • Product 1: Side screw design attaches trolling motor to top bracket and slides into deck-mounted bottom bracket, secured with tightening screw.
  • Product 1: Solid, anodized aluminum construction.
  • Product 2: Trolling motor power plug 2-prong.
Check Stock

Trolling Motor Plug Receptacle Set, Briidea Marine Boat DC Power Connector Waterproof for Freshwater and Saltwater 12,24,36,48V

  • A MUST HAVE FOR TROLLING MOTORS: This plug and receptacle set is suitable for marine trolling motors. The design of self-locking can connect trolling motor and power supply firmly, effectively preventing the plug from accidentally falling off. It has high performance to ensure easy boating and uses high-quality materials to ensure safety. Includes plug and receptacle..
  • PREMUIM QUALITY: Corrosion-resistant, brass gold-plated electrical components. The shell has IP67 waterproof performance, flame retardant performance and high temperature resistance, which can achieve reliable connection in any freshwater or saltwater application. Its weatherproof feature makes it durable, providing continuous service for you..
  • RELIABLE & CONVENIENT: The receptacle contains a watertight sealing cap and a gasket to further strengthen the waterproof performance, and guarantees fastening effect to prevent vibration. This set adopts direct insertion self-locking structure with an ergonomically contoured handle with strong grip. The plug lock ring has a conspicuous unlocking prompt, which is convenient for unlocking. Saves time and effort..
Check Stock

Newport Vessels Replacement Trolling Motor Prop for 55lb 62lb 86lb Trolling Motors

  • Replacement for Newport Vessels Brand trolling motor only.
  • 3 blade Propeller - designed for the 55lb, 62lb, & 86lb thrust Newport Vessels Electric trolling motors (all series).
  • Comes with the nut kit: washer, screw cap, pin, and spanner.
  • Benefits: increased thrust with 3 blades resulting in higher speeds.
Check Stock

Codinter Kayak Motor Mount, Trolling Motor Mount Kit for Sit-On-Top Fishing Kayak Scupper Holes/Kayak Mount Tracks

  • 【Two Install Scenes】 This kayak motor mount works with kayak scupper holes and parallel kayak mount tracks, such as sit-on-top kayaks and fishing kayaks, not for declining flush mount fishing rod holders in the kayak.
  • 【No Drilling Requires】 Installing this kayak trolling motor mount kit does not have to drill into your kayak hull, It’s easy to install just simply plug into the scupper holes or mount it on the track, it’s stable and tightened by the supplied ratchet strap.
  • 【Quality Materials】 The materials used to make this kayak motor mount bracket include anodized aluminum, UV stabilized reinforced plastics, and stainless steel fasteners, this kit is extremely durable and built to last for fresh or saltwater use.
  • 【Heavy Duty】 The mounts are designed to fit into kayak scupper holes / tracks that range from 3.54”-31.5” in width, the diameter of the poles is 1 inch. It can be rated to hold up to 66lb (30kgs) thrust trolling motors.
  • 【Motor Mount】 Suitable for mounting electric and petrol trolling motors either right or left hand side.
Check Stock