2 Pack 700C Road Bike Tubes 700 x 28C/30C/32C FV60mm Long Presta Valve 700C Bicycle Tubes Compatible with 700 x 25C 700x26C 700x27C 700 x 28C 700 x 30C 700x31C 700 x 32C Road Bike Tire Tubes
- 2 Tubes, 700c x 28-35, (27x1-1/8 to 1-1/4).
- 60mm Presta Valve, Smooth w/Removable Core.
- Please check the side of your tire or on your old inner tube for the proper size, valve type and valve length..
- When changing your bicycle inner tube ALWAYS be sure to add just a little air to the tube before installing. This gives it form so it doesn't get twisted or bunch up which may cause a pinch flat. Once the new tube is installed and BEFORE fully inflating only add a few PSI to further form the tube. Inspect for an even bead of the tire to the rim on both sides..
- Then, inflate to approximately half the desired PSI and re-inspect the tire bead to the rim again. If even beading all the way around on both sides then inflate to the recommended air pressure. This procedure is important because if the bead doesn't hook properly on the rim then as the inner tube is inflated it can sneak out between the tire and rim and then BOOM!.
Check StockNuetech Tubliss Rim Tape (Front / 22mm)
- High-pressure tube acts as a bumper to protect rim from impact. Inner tube support sidewall better for less folding over.
- Tubliss locks the tire bead 360° around the rim to act as a full circumference rim lock. Saves up to one pound of weight over stock tubed design.
- Less unsprung weight in tires can help handling and acceleration. Entirely eliminates pinch flats.
- Integrated rim lock near inner chamber valve. Repair tire with a simple plug kit.
- Tubliss allows you to run a wider range of pressures. Tire temperature is greatly reduced, creating consistent pressures. For off-road use only.
Check StockNuetech Tubliss Gen 2.0 (Tubeless) Tire System 18''
- High-pressure tube acts as a bumper to protect rim from impact. Inner tube support sidewall better for less folding over.
- Tubliss locks the tire bead 360° around the rim to act as a full circumference rim lock. Saves up to one pound of weight over stock tubed design.
- Less unsprung weight in tires can help handling and acceleration. Entirely eliminates pinch flats.
- Integrated rim lock near inner chamber valve. Repair tire with a simple plug kit.
- Tubliss allows you to run a wider range of pressures. Tire temperature is greatly reduced, creating consistent pressures. For off-road use only.
Check StockDynaplug Tire Puncture Repair for Neutech TUbliss Motorcycle Tires
- High-pressure tube acts as a bumper to protect rim from impact. Inner tube support sidewall better for less folding over.
- Tubliss locks the tire bead 360° around the rim to act as a full circumference rim lock. Saves up to one pound of weight over stock tubed design.
- Less unsprung weight in tires can help handling and acceleration. Entirely eliminates pinch flats.
- Integrated rim lock near inner chamber valve. Repair tire with a simple plug kit.
- Tubliss allows you to run a wider range of pressures. Tire temperature is greatly reduced, creating consistent pressures. For off-road use only.
Check Stock
Rippin Moto 2.75/3.00-19 Heavy Duty Inner Tube (70/100-19) 2.5mm Thick - TR4 Valve - Fits Most 3.0-19 Motocross Tires, Surron Light Bee X, Talaria and Segway X160/X260
- ...ICK: Made with 2.5mm Thicken Rubber, this inner tube is designed to withstand the toughest riding conditions and provide maximum durability..
- ENHANCED DURABILITY & SAFETY: These inner tubes are engineered to withstand the challenges of rough terrain, featuring advanced pinch and puncture resistance that prevents explosive ruptures and potential harm to both your motorcycle and yourself. They are also expertly molded to prevent pinching, resist twisting, and avoid splitting from the valve stem base, ensuring maximum protection and performance..
- TR4 VALVE STEM: The TR4 valve stems feature short, straight, and threaded designs that offer both ease and safety during inflation. As a standard valve stem, TR4 is compatible with most hand pumps, making it easy to find a suitable pump for your needs. These heavy-duty valve stems are also firmly seated in the tubes via vulcanization, ensuring maximum stability and reliability..
- FOR OFF-ROAD & MOTOCROSS TIRES: For dirt bikes, off-road motorcycles, and motocross motorcycles, heavy-duty inner tubes are a must for optimal comfort and protection. These specially designed tubes can....
Check Stock2 Pack 20" Fat Tire Tubes 20 X 3.0/3.50 AV Valve 20" Bicycle Tubes Compatible with 20X3.0 20X3.2 20 X 3.30 20X3.50 Electric Bike/Fat Tire Bike Tubes
- 【Size】20x 3.0-3.50 Fit 20-inch wheel, tire width between 3.0-3.5. weight 270G.
- 【High Quality】 The bike tube is made from premium butyl rubber.It has the advantages of good sealing performance, ozone resistance, aging resistance, shock absorption, electrical insulation..
- 【Easy Installation】Installation is quick and easy. Please follow inflation guide when airing a tire from a complete flat. Save time and effort, replace the old tube in a few minutes..
- 【Important Note】When changing a bicycle inner tube, be sure to add a little air before installing it. This gives it form so it doesn't get twisted or bunch up which may cause a pinch flat. Inspect for an even bead of the tire to the rim on both sides..
Check StockKenda 695H5222 Heavy Duty Motorcycle Tube - 80/100-21(300/325-21) TR-6
- 2.5mm thick heavy-duty Tuff tubes are designed to resist punctures and pinch-type flats.
- Tuff tubes are two times thicker than OEM tubes and are designed specifically for motocross and off-road use.
Check StockMMG Inner Tube 130/90-16 TR4 Straight Valve Stem, Compatible with 140/80-16, 140/90-16, 150/80-16
- 2.5mm thick heavy-duty Tuff tubes are designed to resist punctures and pinch-type flats.
- Tuff tubes are two times thicker than OEM tubes and are designed specifically for motocross and off-road use.
Check Stock
SILCA Premium Latex Tube 700c | Tire Widths 24mm - 30mm | Lightweight Black Aluminum Valve Stem 42mm Length | Presta Valve | Premium Latex Inner Tube
- Superior Quality | Our Latex Tubes offer smooth rides on the road and are tougher than rubber inner tubes..
- Premium Latex | Our latex is extremely durable and stretchy making it perfect to be used as bike inner tubes. Silca partnered with industry experts Vittoria, an Italian bicycle tire manufacturing company, to create this premium Latex Inner Tube..
- Latex = Speed | Latex gives you faster rolling tires! Compared to standard butyl rubber.
- Size Specs | This bike inner tube has been sized to fit tires measuring 700c X 24-30mm, which will equate to 23-28mm tires used on modern wider rims. Valve stem length is 42mm and will work in all modern disc wheels..
- Use Tubeless Rim Tape | Silca strongly recommend using 2 wraps of tubeless rim tape when using latex inner tubes. Tubeless tapes make installing tires easier, make it less likely to pinch the tube during install and are less likely to move around during installation..
Check Stock
Thick 2
- 1. PRODUCT SPECIFICATION: The tube is suitable for most mountain bikes and is the most widely used size Currently on the market, compatible with 26 inches X 1.75 to 2.125 tires. At the same time, the inflation valve is adopted 32mm standard schrader valve..
- 2. REINFORCED VALVE DESIGN: We made a statistics. Among the cases of tube leaks and tears, 70% occurred at the interface between the valve stem and the tube. our inner tubes are thicker at the contact interface, So the inner tube of hapleby is a tear-resistant reinforced valve design..
- 3. THICKER BUTYL RUBBER: The conventional tube sidewall thickness is 0.75~0.98MM, but our sidewall thickness is 1.12MM, which is thicker than the sidewall on the market, so it is more puncture resistant and strong air tightness. meantimes, with thick butyl rubber that absorbs shocks, you won’t feel the bumps and hollows, add comfort to your ride..
- 4. MORE DURABLE: Every tire produced has undergone strict quality inspection and is durable. For example, if a person weighs 190 pounds and the tires are not damaged, he can travel more than 2000 miles..
- 5. PACKAGE INCLUDING: Each gift box contains 2PCS valve cap, 2PCS tire levers and 2PCS tube, the 2PCS tire levers that came with can save a lot of mounting or unmounting tim....
Check StockSource M.C. 3L Ultimate Low Profile Hydration System with UTA Rapid Refill Adapter and Magnetic Clip Kit, Coyote (4325190203)
- Compatible with the Helix Valve and the Storm Valve.
- Helix Valve features a rounded shape that requires no mouth orientation for easy use.
- built-in "bio-net" style shut-off mechanism prevents spilling during transport.
- Hi-Flow Storm-Valve: No-bite push-pull valve with integrated shut-off mechanism.
- Angled Valve: Turns 360 degrees for perfect valve/mouth orientation.
- 25cm shorter tube and less excess tube bouncing around the chest.
Check StockSilverline Tyre Lever 400mm
- TyreKey, the tyre-tool that makes changing an inner tube simple..
- The double groove glides round the rim, lifting the tyre off with ease..
- The unique claw re-installs the tyre in seconds without touching the inner tube, eliminating the risk of pinch-punctures..
Check StockColeman 120V Electric Quick Pump
- Powerful, electric air pump helps ensure a good night's sleep in the outdoors.
- Designed for use with Double Lock Valve, Boston Valve, and Pinch Valve systems.
- Includes adapters for each type of valve.
Check Stock
