Categories

Best Pipe Blast

Testex Press-O-Film X-Coarse Grade (1.5-4.5 mils / 38-115 microns) Replica Tape, Roll

  • Standards: BS EN ISO 8503-5, BS 7079-C5, SSPC-SP5, SP 6, SP 10, SP11-87T, ASTM D 4417-C, NACE RP 0287-95, ISO 8503-5.
  • Testex Press-O-Film Replica Tape offers a unique replica technique and with a simple snap gauge will allow you to take accurate, low-cost blast-surface profile measurements. Testex makes surface replicas easy to obtain and produces average maximum peak-to-valley readings that ensure optimum blasting effectiveness. Replicas can be retained for future needs..
  • The accuracy of Testex measurements is due to an innovative two-level film that can produce virtually exact replicas of the abrasive blast surfaces. The film is available in three different thickness grades to cover the most common range of blast profiles..
  • Measurements can be taken in locations that are not possible using conventional stylus devices, e.g. internal pipe diameters and grooves, etc..
Check Stock

Press-O-Film X-Coarse Grade (1.5-4.5 mils / 38-115 microns), Roll

  • Testex Press-O-Film Replica Tape offers a unique replica technique and with a simple snap gauge will allow you to take accurate, low-cost blast-surface profile measurements. Testex makes surface replicas easy to obtain and produces average maximum peak-to-valley readings that ensure optimum blasting effectiveness. Replicas can be retained for future needs.
  • The accuracy of Testex measurements is due to an innovative two-level film that can produce virtually exact replicas of the abrasive blast surfaces. The film is available in three different thickness grades to cover the most common range of blast profiles.
  • Measurements can be taken in locations that are not possible using conventional stylus devices, e.g. internal pipe diameters and grooves, etc.
  • Easy to use, remove the protective paper from the tape and place firmly on the blasted surface. Apply moderate pressure with the Burnishing Tool over the circular cut-out in the tape. Remove the tape. The replica is now ready for measurement using the Snap Gauge.
Check Stock

Adjustable Film Coating Applicator 0-3500μm 55mm Film Coater with Micrometer Wet Film Preparation Device High-Precision Professional

  • Standards: BS EN ISO 8503-5, BS 7079-C5, SSPC-SP5, SP 6, SP 10, SP11-87T, ASTM D 4417-C, NACE RP 0287-95, ISO 8503-5.
  • Testex Press-O-Film Replica Tape offers a unique replica technique and with a simple snap gauge will allow you to take accurate, low-cost blast-surface profile measurements. Testex makes surface replicas easy to obtain and produces average maximum peak-to-valley readings that ensure optimum blasting effectiveness. Replicas can be retained for future needs..
  • The accuracy of Testex measurements is due to an innovative two-level film that can produce virtually exact replicas of the abrasive blast surfaces. The film is available in three different thickness grades to cover the most common range of blast profiles..
  • Measurements can be taken in locations that are not possible using conventional stylus devices, e.g. internal pipe diameters and grooves, etc..
Check Stock

CGOLDENWALL CS-1 Tablet Friability Tester/CS-1 friability test Instrument 110V/ 220V 2 Cylinder Number Speed: 25 rev/min

  • Testex Press-O-Film Replica Tape offers a unique replica technique and with a simple snap gauge will allow you to take accurate, low-cost blast-surface profile measurements. Testex makes surface replicas easy to obtain and produces average maximum peak-to-valley readings that ensure optimum blasting effectiveness. Replicas can be retained for future needs.
  • The accuracy of Testex measurements is due to an innovative two-level film that can produce virtually exact replicas of the abrasive blast surfaces. The film is available in three different thickness grades to cover the most common range of blast profiles.
  • Measurements can be taken in locations that are not possible using conventional stylus devices, e.g. internal pipe diameters and grooves, etc.
  • Easy to use, remove the protective paper from the tape and place firmly on the blasted surface. Apply moderate pressure with the Burnishing Tool over the circular cut-out in the tape. Remove the tape. The replica is now ready for measurement using the Snap Gauge.
Check Stock

Eastwood 5 Pack 5-20 in. X 10 1/2 in. Window Liners Replacement Abrasive Media Blast Cabinet

  • Our Famous C-35 Series Power Gun with Long-Lasting 1/4" Tungsten Carbide Nozzle! Skat Blast Pro C-35-C Foot-Pedal Power Gun is "High-Velocity" and is designed especially for siphon blasting in all foot-pedal-operated Skat Blast Cabinets..
  • Includes our famous C-35 Series Power Gun with a durable medium 1/4" Tungsten Carbide Nozzle installed in the gun for long life. Carbide nozzle outlasts 30 ceramic nozzles. Plus, ergonomic handle for operator comfort..
  • Skat Blast Gun power head is manufactured from Zamac, a harder material than aluminum for longer life.
  • and has a case-hardened insert for better fit against back side of nozzle. If it's time to replace your foot-pedal gun in your cabinet, this is the one to buy!.
  • Has 1/4" standard female pipe thread air inlet at bottom of handle. Your hose from pickup tube slips on power head. Accepts 5/8" ID siphon hose. Complete with 1/4" medium Tungsten Carbide Nozzle and medium air jet installed in gun, 2 medium air jets, 1 air jet gasket, and allen wrench..
  • Max 125 psi. Requires 10-15 cfm, 5-7 HP. 7-3/4" wide, 6-1/2" high, 1" deep. Made in USA. Patent No. D760,571. FOR SIPHON BLASTING ONLY..
Check Stock

CNT Racing blast pipe exhaust V2 STAINLESS UNIVERSAL MUFFLER Kick up style …

  • This is a brand new CNT Racing blast pipe V2 kick up version..
  • Universal welding is required for installation..
  • 18 inches long x 6.5 inches wide and 3 inch inlet and dual 3 inch outlet.
Check Stock

Uniweld 40061 Sludge Blaster

  • Cleans A/C Condensate Drain Lines without having to access the drain pan.
  • Clears condensate drain lines of sludge and algae in seconds.
  • With the use of Nitrogen, CO2 or water the Sludge Blaster expands inside the pipe and blast the clog and sludge free from the drain line.
  • Attaches to Uniweld Part No H2SSM 2-Feet Service Hose or Part No H5SMY 5-Feet Service Hose.
Check Stock

Toilet Plunger Air Power Bathroom Clog Remover Vacuum High Pressure Drain Blaster Toilet Snake Bathtub Floor Drain Pipe (Green A,Suction cup)

  • POWERFUL TOILET PLUNGER: This drain plunger uses the power of high-pressure compressed air to blast away the toughest clogs quickly and easily by push..
  • PREMIUM MATERIAL: Plastic handle, natural rubber seal head. Humanized pump handle, comfortable to grip..
  • EASY TO OPERATE: This powerful plunger is easy to use. No more to call a plumber at midnight and pay about $200 fees, you can deal with the pipes clogging by yourself now..
  • MULTIPURPOSE: applied to different kinds of pipe clogging. This high pressure toilet plunger suitable for toilet,drains, kitchen sink, shower, floor drain, bathroom bathtub and so on, can blast away the blockage caused by hair, cloth, oil and other garbage..
  • EASY TO CLEAN AND STORE?you can solve your problem in seconds. Higher efficiency, simpler operation, and easier storage..
Check Stock

TGBJE Boyfriend Gift Valentine's Day Gift for Men I Love You For Who You Are But That DICK Sure Is A Bonus Keychain Husband Gift (DICK keychain)

  • FINALLY, A SOAP MADE TO CLEAN DIRTY PIPES! – Uncle Richard’s Plumbers’ Soap turns washing his favorite and most important tool into the best part of his daily – and nightly – routine. Unclogging a pipe has never been such a blast!.
  • PROPERLY MAINTAINED PLUMBING PAYS OFF – Well cared for plumbing is the key to more happy endings. This lightly scented circle soap will keep that pipe so sparkling clean, you’ll be proud to show it off to everyone..
  • FUNNY SOAP FOR MEN ON EVERY OCCASION – Not only is this willy washer a humdinger of a naughty stocking stuffer for men, but it’s awesome for bachelor parties, birthdays, happy divorce parties, and a wide variety of holidays..
  • SIZE DOESN’T MATTER – USUALLY – Uncle Richard wanted every plumber’s snake to enjoy the benefits of a mind-blowing, thorough clean, so his world-famous dick soap is one size fits most!.
  • NOVELTY USE ONLY – No pipe snakes were harmed in the making of this funny gift for handymen..
Check Stock

Ultra Street Fighter IV - PlayStation 3

  • Five new characters including Poison and Hugo and Elena, Rolento and Decapre join the fight complete with their own unique play styles.
  • Six new battle environments - Pit stop 109 and Mad Gear Hideout and Cosmic Elevator and Blast Furnace and Half Pipe and Jurassic Era Research Facility have been added for even more visual variety.
  • Rebalanced gameplay - direct fan feedback was gathered on all of SSFIV original characters and core system mechanics in order to achieve the most balanced Street Fighter ever.
  • The most complete offering ever - Purchase the standard version and get access to over 100 DLC costumes included on disc!.
Check Stock

Sewer Jetter Kit for Pressure Washer 100FT, Newest 5800PSI Drain Cleaner Hose 1/4 Inch NPT Corner, Rotating and Button Hose Sewer Jetting Nozzle Pearl Corsage Pin Waterproof Tape with 2 Spanner

  • ...-powered and electric pressure washers up to 5800 PSI.The reinforcement layer is a chemically bonded 1/4" high strength polyester textile weave. The cover layer is made of thermoplastic polyurethane and is resistant to weather, oil, abrasion and ozone..
  • 【4 Efficient Sewer Jetter Nozzles】 Orifice 4.0 Side port to blast at corners where hose cannot navigate. Ideal for cleaning around the corner.4.0 orifice Button Nose Sewer Jetter Nozzle clears blockage and flush out debris by front 0° spray jet and 3 rear 33° spray jets..
  • 4.5 orifice Rotating Sewer Jet Nozzle offers an even cleaning and flushes out debris by 3 backward rotating spray jets which blast into clogged pipe and moves it through pipe. Corner sewer jetter nozzle: 1 water spray sideways that clears blockages at the corner. 3 rear jets at 33° flush out debris loosened by the front jet..
  • 【Quick Connect Plugs And Metric M22 To 1/4 Inch Female Npt Fittings】Quick Connect Plug used in a lot of situations where high pressure connections are frequently assembled or disassembled.Ideal for quick exchange of pressure washer outlet, sewer jetter hose, guns and nozzles.It makes a solid connection with quick coupler each time.Pressure washer coupler convert metric M22 14mm female NPT threa....
Check Stock

DCT 4in Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection

  • ...f, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to quick connect thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
  • 1/8-inch (3mm) quick adaptor coupling thickness.
  • 4.5-inch (11.4cm) quick adaptor coupling length.
  • Fits snugly on dust ports for table saw, planer, jointer, and more.
  • CONTENTS: Package includes (1) quick adapter threaded hose coupling.
Check Stock

DCT 4in Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping

  • ...out sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
  • Fits snugly on dust ports for table saw, planer, jointer, and more.
  • CONTENTS: Package includes (1) threaded hose coupling.
Check Stock