Categories

Best Pipe End Machine

68mm 2.5 Inch Mini Metal Adjustable Wrenches Hand Tool With 0-10mm Jaw Adjustable Spanner

  • The wrench is made of high-quality carbon steel material, with a polished surface, strong and durable, not easy to rust and deform.
  • ♻️The hand-held pipe wrench has a ring at the end, which can be conveniently hung on the wall, backpack, pants, etc..
  • ✅Applicable to industrial, machine repair, auto repair, electronic maintenance, bicycle maintenance, toys, crafts and home essential tools..
Check Stock

1 Pieces Drip Irrigation Tubing Hole Punch Tool for Easier 1/4 Inch Fitting Emitter Insertion and 50 Pieces Drip Irrigation Plugs Goof Plugs for Hose or Tubing End Caps Puncture to Insert Fittings

  • The package includes: 1 drip irrigation pipe punching machine and 50 drip irrigation plugs, a reasonable package for your daily use.
  • Appropriate size: The punch size is 3 mm (0.118 inch), which can fit tightly to eliminate waste and maintain proper pressure in the drip system. Both ends of the irrigation plug are of different sizes. One end is suitable for standard holes of 3 mm-6 mm, or one end of any 1/4 inch feeder is covered, and the other end is suitable for worn transmitters of 7 mm or about 1/4 inch Hole.
  • this multifunctional stopper is suitable for filling into 1/2 inch drip irrigation pipe.
  • Practical and durable: the punching tools are made of quality plastic and metal, practical and durable, not easy to rust and damage.
  • the plastic part of the punch allows you to hold it comfortably, and the punch has been polished, so it will not change It is blunt and can serve you for a long time.
  • the drip irrigation pipe plug is made of quality plastic, which is not easy to break or deform, sturdy and durable, waterproof, and can be applied outdoors in sunlight or rainy weather..
  • Scope of application: Irrigation pipe puncher can be applied to perforate polyethylene pipes for installation of drippers and micro nozzles.
  • suitable for PE pipes with diameters o....
Check Stock

24 Pieces Lint Traps Washing Machine Stainless Steel Lint Snare Traps Laundry Mesh Washer Hose Filter with 24 Pcs Cable Ties

  • Package includes: 24 pieces washing machine lint traps and 24 pcs cable ties, common size to fit most washing machine discharge hoses..
  • Washing machine lint trap size: expand length of the lint trap is 27 cm and 5 cm in width, fits most washing machine discharge hoses. Cable tie: length is 19.7 cm, good help to securely fasten lint Trap to the drain pipe. Fits all household laundry hoses Fits 1″ to 3″ diameter hoses..
  • Usage: It is very easy to install, traps can slips easily onto end of hose, no tools needed for installation, easy to put on the discharge hose and they are easy to remove..
  • Material: lint traps are made with high-quality stainless steel. These lint traps will not rust, do not readily tear, and are durable, Prevent clogging of drains..
  • Note: the traps work on a washing machine hose only used on the hose that drains into a sink. Not applicable for stand-pipe drains or pipes that go into the wall..
Check Stock

SUMMERBUDDY Type B Hose Adapter & Plunger Valve & Pool Hose Holder for Above Ground Swimming Pool, 1.25' to 1.5' Pool Hose Adapter B & On/Off Plunger Valve for Threaded Pumps (2 Packs)

  • 【Multifunctional】This pool hose adapter is used for saltwater system of above ground swimming pool. If your pool inlet/outlet and pipe holder are 1.25" , but you want to install a 1.5" plunger valve, the adapter B will be the perfect solution..
  • 【Waterproof】The rubber ring or band on adapter B and plunger valve tightly with other pool parts to form a sealed space to prevent water leak..
  • 【Convenient】If you want to replace the filter element or upgrade a stronger filter, the plunger valve will help you to control water flow..
  • 【Safe】The pool pipe holder reduce the pressure of the water pipe on the pool wall, thereby reducing damage to the pool..
  • 【Easy installation】The pipe holder is installed between adapter B and inlet or outlet. The big end of pipe holder attach to 1.25" pool inlet or outlet. And the small end of the holder attach to small end of adapter B, then fixed them with clamps. Last, the big end of adapter B attach to the threaded end of plunger valve, simply screw it on.(Contains 2 adapters B, 2 plunger valves, 2 pipe holders).
Check Stock

Heavy Duty Pipe Clamp Jaws, 1 inch Heavy Duty Pipe Clamp Vise Fixture Set Wood Gluing Pipe Clamp Fixture Woodworking Cast Iron Clamp for Metalworking, Woodworking and Frame Assembly

  • GREAT CHOICE FOR WOODWORKING: This jig is perfect for woodworking work on cabinets and crates. Woodworking cast iron clamps with ergonomic handles make clamping easier and reduce hand fatigue.
  • HIGH QUALITY PERFORMANCE: The pipe clamps are made of solid cast steel, durable and sturdy. Keeps wood stable as you work, a great addition to any woodworking bench in your home or shop.
  • EASY TO USE: The woodworking jig is easy to handle. Just slide the tailgate over the pipe on the other end. Then put the coil spring stopper on the pipe thread at the end of the pipe to prevent the end from sliding out of the pipe during adjustment and away from the clamped workpiece.
  • HIGH QUALITY CAST STEEL MATERIAL: The pipe clamps are made of high hardness and high quality cast steel material, which is durable enough to meet the needs of your daily work. Wide range of uses, can be used as wooden clips, water pipe clips, plastic clips.
  • WIDE USE: Woodworking pipe clamps measure 1" and weigh 1760g/62.1oz (approx.). Often used in metalworking, woodworking and frame assembly, from DIY to industrial product....
Check Stock

rawr im 4 Year Old boy Shirt Roar 4th Birthday Shirt boy Four Dinosaur Tshirt Charcoal Blue 4T

  • Connects 4 in. S&D pipe to 4 in. S&D pipe & NDS parts that fit 4 in. S&D connections such as Spee-D, 5 in., & 8 in. Pro Series Channel Drain Outlets,....
  • Connects 4 in. Sewer & Drain (S&D) pipe to 4 in. S&D pipe in non-pressurized drainage and sewer piping systems.
  • Connects 4 in. S&D pipe to select drainage products such as channel drain outlets and pop-up emitters.
  • Extend the pipeline by attaching 4 in. S&D pipe to one end of fitting and another 4 in. S&D pipe to the other end.
  • Comes with one PVC Coupling. Meets applicable ASTM standards. Hassle-free limited lifetime warranty guarantees the NDS product is free from....
Check Stock

LITHE Lint Traps Washing Machine, 60 Pcs with Zip Ties, 304 Stainless Steel Snare Washer Hose Dog Hair Catcher, Never Rust

  • Excellent value: 60 pieces of washing machine lint traps and 60 pieces of cable ties, enough for replacements, absolutely great deal and cheaper than ones in stores!.
  • Washing Machine Lint Trap Size: Expand length of the lint trap is 10.8 inch that longer than stores and 2.36 inch in width, fits most washing machine discharge hoses. Cable tie: length is 7.8inch, good help to securely fasten lint Trap to the drain pipe.
  • Easy to Use: Traps are easy to put on the discharge hose, traps can easily slip onto the end of hose.No tools needed for installation and they are easy to remove. Note: Not intended to be applied with stand pipe drains..
  • Wide Range of Use: Good for washing machine hoses that empty into a basin, sink, bathtub, etc. Can catching lint, hair, pieces of tissue, etc. So will greatly reduce the risk of drain clogging.
  • Never Rust Material: Made of 304 sturdy stainless steel. It will never rust at all! 95 N/cm breakdown strength that is so durable!.
Check Stock

PTFE Plumbers Tape, VCELINK Teflon Water Sealant Thread Tape, 520\ Length 1/2\ Width, Industrial Plumbing Tape Stop Leaks for Shower Heads and Pipe Threads (2 Rolls）

  • VCELINK Teflon Tapes can be used to connect threaded pipes. A good solution for enhancing the tightness of pipes..
  • WIDELY APPLICABLE: Plumbing tape is designed for home and threaded pipe applications. Suitable for the most threaded-installing piping devices, including washing machine pipes, faucets, shower nozzles, etc..
  • GOOD QUALITY: the pipe sealant tape has an excellent character of sealing, ductility, high-temperature resistance, and corrosion resistance. And the thickness which is 0.09mm is moderate..
  • EASY TO USE: Simply wrap the waterproof Teflon tape around the threaded male end of the pipe or connector and screw it in. The tape can maintain the original width.
  • Less stickiness on the fingers and is easy to remove..
  • PACKAGE AND AFTER-SALES: 2 Rolls 520" length by 1/2" width PTFE pipe sealant tape. 18 months warranty for quality problem..
Check Stock

AMERIMAX HOME PRODUCTS 2526519 2 in x 3 in B or Side Elbow Brown Aluminum, Two-by-Three

  • Connects 3 in. S&D pipe to 3 in. S&D pipe, & to NDS parts that fit 3 in. S&D connections such as Spee-D, 3, 5, & 8 in. Pro Series Channel Drain Outlets, 6 in. Low-Profile Adapters, 4 & 6 in. Square Grates, 3 & 4 in. Round & Atrium Grates, Pop-Up Emitters.
  • Adds a 90° turn from 3 in. Sewer & Drain (S&D) pipe to 3 in. S&D pipe in non-pressurized drainage and sewer piping systems.
  • Adds a 90° turn from select drainage products such as channel drain outlets, drainage grates, and pop-up emitters to 3 in. S&D pipe.
  • Attach 3 in. S&D pipe to one end of 90° elbow and 3 in. S&D pipe to the other end.
  • also connects 3 in. S&D pipe to select drainage products that accommodate 3 in. S&D connections.
  • solvent weld to PVC components for a watertight connection.
  • Comes with one PVC Elbow. Meets applicable ASTM standards..
Check Stock

END CLAMP / PANEL T CLAMP: 1-3/8' Chain Link Fence Clamp (for t-ing into a pipe (1-3/8' x 1-3/8'). 1 CLAMP

  • ✔ Pre-measure outside diameter of fence pipe prior to purchase to ensure You order correct size.
  • ✔ This T-clamp allows you to "Tee" into a piece of 1-3/8" chain link fence pipe with another 1-3/8" pipe..
  • Use for making extensions to an existing fence, connecting chain link fence panels, and more..
  • These end clamps are galvanized for long term exterior use. End/T clamps are easy to install..
  • Depending on what you are making you might want to purchase these in pairs one for each pipe end..
Check Stock

Pipe Swing Set Top Bar Frame - Straight V

  • The Top Pipe Center Frame can be used to extend a Stand Alone Pipe Swing Set.
  • Quick Way to extend a Pipe Swing Set. Hardware Included.
  • All you Need is Two Pipe End Frames , Four Swing Hangers, Four Metal Pipe Legs & One Top Metal Pipe for Complete Set.
  • Top Pipe Fits 2 3/8" to 2 1/2" Diameter Metal Pipe and Legs Fit 2" Diameter Metal Pipes...
  • Please take the product with you when purchasing the pipes to make sure it fits.
Check Stock

Tubing Bead Roller Tube Pipe Tubing Beader Tool Intake and Intercooler Piping Fits 5/8″

  • Simply insert the end of the tubing between the dies and start cranking the turning handle.This vise-mounted tool will form a perfect bead on the end of aluminium or copper tubing..
  • Aluminum, steel or stainless steel Intercooler pipe Fits 5/8″ and larger tubing..
  • Aluminum pipe: diameter from 5/8″(16mm) to 4″(102mm),max thickness 3mm.
  • Steel pipe: diameter from 5/8″(16mm) to 4″(102mm),max thickness 1mm.
  • By turning the handle on the side of the tubing beader tool, you can form a desired bead on the end of aluminium or copper tubing..
  • Works best when secured in a vice.Please Note: Always apply the bead before welding..
Check Stock

VEVOR Pneumatic Liquid Paste Filling Machine 50-500ML Volume, Horizontal Cream Filling Machine with 30L Hopper, Pneumatic liquid Filling Machine for Water Oil Cream etc.

  • Accurate Pneumatic Filling: Our liquid filling machine is equipped with an excellent air cylinder, ensuring the precision of filling, Filling accuracy:≤±1%. In order to meet your various filling needs, adjustable speed and volume are necessary for this machine. Filling volume: 1.7-16.9 oz/50-500 ml.
  • Auto & Manual Control: Two control modes help you operate the machine efficiently. Pedal once and discharge once in manual mode while filling continuously in auto mode. With the advanced air pressure gauge, you can observe the pressure changes at any time and stop the machine if something goes wrong..
  • Stainless Steel Structure: Pneumatic filling machine is made of 304 stainless steel food-grade materials, which can endure corrosion, rust, acid, and alkali. The anti-drip nozzle is designed to avoid leakage and save more liquid during operation..
  • Well-Designed Details: Pneumatic filling with a delicate filling device, including conveying pipe and non-return valve. The soft valve has an excellent non-return effect.
  • make sure the liquid can be transferred to the pipe without blocking and filling successfully in the end..
  • Extensive Uses: This lip gloss filler machine is widely used in pharmaceutical, cosmetic, food, pesticides,....
Check Stock