Categories

Best Pipe Fittings Adapter

Tecmolog Brass Pipe Fittings Connector G 1/2 Female Thread (Metric BSP) to US 1/2 NPT Male Thread Pipe Fitting Converter Adapter, SBA037

  • BSP to NPT Adapter: Metric BSP 1/2" (G) female to NPT 1/2" male pipe fitting converter, easily change from standard EU metric to US inches.
  • Brass Pipe Fittings 1/2: This adapter is made of brass for resistance to corrosion, ductility at high temperatures, and low magnetic permeability.
  • Rubber Washers and Teflon Tape for a Perfect Seal: Come with an o-ring for the G1/2 side and the 1/2 " NPT side to produce a leak free connection.
  • Connect Hoses or Fittings of US plumbing: This is used to adapt the plumbing to NPT on bath or kitchen fixture, and European hose fittings.
  • Easy to Install: It has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench.
Check Stock

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

  • Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
  • Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
  • Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
  • These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..
Check Stock

Class A Customs 13 Gallon Water Tank & Plumbing Kit T-1300-BPK

  • ...Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • 13 GALLON TANK MEASUREMENTS 21” x 9” x 16”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

TIRDITY 3/4\ Pipe Fittings - 24 Pack 3/4 Inch Black Floor Flange Elbow Tee Combo | Malleable Cast Iron Vintage Furniture Grade Threaded Pipes for DIY Industrial Shelves, Pipe Shelving, Steampunk Decor

  • 【 3/4" INCH ELBOW TEE COMBO PACK 】Our industrial pipe fittings 3/4 malleable iron threaded elbow/tee combo/pipe flange pack provides you the great floor flange pipe fittings at a reasonable price. Malleable cast iron pipe fittings can decorate your home or store more elegant and functional..
  • 【 PIPE INDUSTRIAL DECOR 】You can use these black malleable pipe fittings to install durable iron frame for your pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, wall lamp or other industrial home decors. When you prefer an industrial, steampunk, vintage, retro, factory look, our decorative black pipe fittings are the way to go. Threaded pipe fittings are built to fit your household with an industrial, rustic style. Our black steel pipe fittings will definitely satisfy you..
  • 【 EASY TO INSTALL 】These metal cast pipe fittings are threaded, just screw the threaded rods or pipes to the tees and elbows and they will hold forever. No screws needed to install steampunk pipe fittings. Easy to install, no DIY difficulties to connect Pipe furniture fittings. You will love black iron pipe connectors..
  • 【 MATERIAL OF RAW IRON 】Since threaded metal pipes are unprocessed cast iron parts, we strongly recommend you to clean and seal each part of bl....
Check Stock

Anderson Metals 56120-0806 Brass Pipe Fitting, Adapter, 3/8' Male Pipe x 1/2' Female Pipe

  • Adapter for connecting pipes or fittings of different types.
  • Male National Pipe Taper (NPT) threads on one end and female NPT threads on the other for connecting pipes with different ends. Please see NPT Thread - chart to determine the correct size required. Pipe Size and actual Thread OD are different. The Thread OD is larger than the Pipe Size..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • Meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Spears 1435 Series PVC Tube Fitting, Adapter, Schedule 40, Gray, 2" Barbed x NPT Female

  • Adapter for connecting pipes or fittings of different types.
  • Fitting connects to schedule 40 PE pipe on one end and has an NPT female connector on the other.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock

Polypropylene Pipe Fitting, Cross, Schedule 80, 1/2\ NPT Female for CR050

  • Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable black iron fittings are 100% tested and protected right at the factory. Home TZH Floor Flange of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • Wide Application: Our pipe fittings come in 10 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. Floor flange pipe fittings are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our cast iron pipe fittings work great without sacrificing functionality..
  • Without DIY Difficulty: Home TZH Industrial pipe flange comes with three standard holes allowing you to secure your flange to floors or walls. The floor flange is suitable for all kinds of surface application. Put this up in minutes. You can install the pipe fittings with easy to follow directions. Fix a wooden board with floor flange, than fix the whole bracket to the wall with screws and screw holder..
  • Your Personal DIY Style: The simple and indu....
Check Stock

SpringSpray 1-1/2\ NPT Male x 1-1/2\ NST (NH) Male Brass Hexagonal Nipple Fitting Fire Equipment Hex Nipple Doule Male Fire Hose Adapter

  • ...UE DESIGN】- With hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench. Hex tube fitting as a short length of pipe with threaded ends for connecting threaded pipes.
  • ⚒【WIDE APPLICATION】- Male to male adapters are used to bridge two female hose, pipe or valve fittings. Suitable for use in general firefighting applications. Brass fire hydrant adapter fittings are used for connecting fire hose, PVC pipe, and other low-pressure pipes in the fire brigade, industry, refinery, building industry, agriculture, shipping, military, and civil protection.
  • ⚒【100% SATISFACTION SERVICE】-We have a professional product development team. If you have any questions about compatibility or any dissatisfaction, please feel free to contact us and we will help you solve it perfectly.
Check Stock

only fire 12 Ft 3/4' ID Natural Gas Hose with Quick Connect/Disconnect Fittings for Grill,Generator,Patio Heater,Pizza Oven,etc

  • Hose Connection: 3/4" Male quick discount plug x 3/4" Male pipe swivel.
  • Quick Connector: 3/4" quick connect x 3/4" Female pipe thread.
  • 12FT gas hose , outside 100% solid brass and rubber fittings, long-lasting and sturdy. Provides secure, tight connection between grill or fire pit and tank.
  • Functions effectively with natural or liquid propane gas. Unites LP grills, natural gas grills and RVs to permanent fuel sources.
  • Use for high BTU output outdoor cooking appliances, construction heaters, and standby generators.
  • The male quick disconnect plug fits into quick disconnect adapter (3/4" quick connect x 3/4" female pipe thread). Automatically shut off the flow when pipe is removed, via the Quick disconnect adapter.
Check Stock

3 Pack NPT 1/2"Male x G1/2" Female Brass Pipe Fitting Reducer Thread Adapter

  • Machined Brass material make it strongest construction for prolonged service life..
  • 1/2 inch NPT Male Pipe to 1/2 inch Female Pipe,3 pack adapter..
  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability..
  • Brass adapter has a male NPT threaded end,Female G threaded end,and connects hoses or fittings of different types..
  • Suitable for bathroom&kitchen faucet connection, bathroom shower connection..
Check Stock

RAPIDAIR FASTPIPE F28090 1' Fastpipe Master Kit, 90', 1', Blue

  • Aluminum pipe with nylon compression fittings.
  • 90 ft of 1 Inch pipe (12) 7 ft. 6 in. Pieces.
  • (7) unions, (5) elbows, (2) tees, (20) clips, tools, (3) outlets, (1) threaded adapter x 3/4 male NPT.
Check Stock

1/2\ Pipe Fitting Elbow, Home TZH DN15 Threaded Cast Black Malleable Iron for Steampunk Vintage Shelf Bracket DIY Plumbing Pipe Decor Furniture (20, 1/2\)

  • Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable black iron fittings are 100% tested and protected right at the factory. Home TZH pipe fitting elbow of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • Wide Application: Our pipe fittings come in 20 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. Pipe fittings elbow are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our cast iron pipe fittings work great without sacrificing functionality..
  • Without DIY Difficulty: These pipe fittings are threaded, just connect the threaded rods or pipes to the elbows, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft Retro Indust....
Check Stock

Home TZH 45-Degree-Elbow, Threaded Cast Black Malleable Iron Elbow for Steampunk Vintage Shelf Bracket DIY Plumbing Pipe Decor Furniture (10, 1/2")

  • Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable black iron fittings are 100% tested and protected right at the factory. Home TZH pipe fitting elbow of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • Wide Application: Our pipe fittings come in 10 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. Pipe fittings elbow are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our cast iron pipe fittings work great without sacrificing functionality..
  • Without DIY Difficulty: These pipe fittings are threaded, just connect the threaded rods or pipes to the elbows, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft Retro Indust....
Check Stock