Categories

Best Pipe Locating Service

NF-826 Underground Cable Locator Pipeline Detector Professional Wire Tracker for Detecting Cable Line Fault Sensitivity Adjustable

  • Detecting and Locating breaks and short circuit in cables and electrical lines buried in wall or underground..
  • Detecting the laid metal tap water pipe and metal heating pipe..
  • Detecting interruptions and short-circuits in floor heating..
  • Detecting fuses and assigning current circuits,tracing sockets and junction boxes having accidentally been covered by plastering..
  • The transmitter is integrated with the function of AC/DC voltmeter, which can measure 12 to 400V AC/DC voltage on a linear basis..
Check Stock

RIDGID 19238 NaviTrack Scout Locator, Underground Pipe Locator and Underground Cable Location Device & 16728 Remote Transmitter (512 Hertz Sonde) for Underground Pipe Location,Red/Black,Small

  • Product 1: Multi-directional antenna technology sees the entire signal all of the time - maximize the signal strength to find the target pipe, sonde, or energized line.
  • Product 1: Underground pipe locator verifies position using a micro-mapping display to mark distinctive poles in front of and behind the target, ensuring an accurate locate.
  • Product 1: When using as underground cable locator or pipe locator, the Navitrack Scout automatically calculates and displays depth when oriented over the target..
  • Product 1: Meets FCC Class B and EN 55022 Class B - operates in these standard frequencies: Sonde - 16 Hz, 512 Hz, 640 Hz, 874 Hz and 33 kHz.
  • Line Trace - 128 Hz, 1 kHz, 8 kHz and 33 kHz.
  • Product 2: Attach remote transmitter to drain cleaning cable or a water jet hose to locate pipe underground.
  • Product 2: Flashing LED to indicate that sonde is transmitting and ready to operate as a beacon during underground pipe location.
  • Product 2: Meets FCC Class B and EN 55022 Class B requirements.
  • Product 2: Adapters (catalog # 19263, 19268, 19273, and 19258) attach transmitter to drum machine or sectional cables provide versatility in locating underground pipe and line detection.
Check Stock

RIDGID 44473 SR-24 Utility Line Locator, Black

  • Product 1: Multi-directional antenna technology sees the entire signal all of the time - maximize the signal strength to find the target pipe, sonde, or energized line.
  • Product 1: Underground pipe locator verifies position using a micro-mapping display to mark distinctive poles in front of and behind the target, ensuring an accurate locate.
  • Product 1: When using as underground cable locator or pipe locator, the Navitrack Scout automatically calculates and displays depth when oriented over the target..
  • Product 1: Meets FCC Class B and EN 55022 Class B - operates in these standard frequencies: Sonde - 16 Hz, 512 Hz, 640 Hz, 874 Hz and 33 kHz.
  • Line Trace - 128 Hz, 1 kHz, 8 kHz and 33 kHz.
  • Product 2: Lightweight and compact transmitter that delivers up to 5 watts of power (3 power output settings) for line locating, underground cable location, and more.
  • Product 2: Transmit 2 frequencies simultaneously.
  • Product 2: Easy to use - Convenient buttons with LED light indicators, audio feedback confirms a good circuit before beginning a trace, and easy carry straps.
  • Product 2: Generates frequencies: Direct Connect - 1 kHz, 8 kHz, 33 kHz, 262 kHz*.
  • Induction - 1 kHz, 8 kHz, 33 kHz, 262 kHz*.
Check Stock

Sunex 1410 10-Ton, High Height, Pin Type, Jack Stands, Pair

  • Made of heavy schedule pipe for added strength and stability.
  • Quick and easy height adjustment.Base Length:38.27 inch.
  • V shaped saddle to cradle axles or other under truck components.
Check Stock

Schonstedt Rex Multi-Frequency Pipe & Cable Locator

  • 3 Active Frequencies: 512 Hz, 33 kHz, 82 kHz.
  • Locates 512 Hz Sondes for tracing & detecting plastic pipes.
  • Recommended for locating all types of underground utilities: water and sewer pipes, electrical lines, and telecom lines..
Check Stock

RIDGID 14053 SeeSnake Plumbing Camera Snake Sewer Camera Locator with 200-Foot Reel and Standard Color Video Inspection Camera

  • Features hardened stainless steel plumbing snake camera head with spring assembly for optimum durability.
  • 6 rugged, high-intensity LED lights built into self-leveling sewer inspection camera for exceptional viewing and long life.
  • Flexible transmitters make underground pipe locating easy - 512 Hz sonde transmitter is compatible with RIDGID pipe locators.
  • Sewer inspection camera is waterproof to 330 feet (100 meters) and can be used with any SeeSnake monitor or recorder.
  • 1.365 Inches (35mm) Inspection Camera works with 2 to 12-inch diameter plumbing line with a maximum run of 200 feet (61 meters).
Check Stock

RIDGID 13988 SeeSnake Plumbing Camera Snake, Sewer Camera Locator with 200-Foot Reel and Self-Leveling Color Video Inspection Camera

  • Features hardened stainless steel plumbing snake camera head with spring assembly for optimum durability.
  • 6 rugged, high-intensity LED lights built into self-leveling sewer inspection camera for exceptional viewing and long life.
  • Flexible transmitters make underground pipe locating easy - 512 Hz sonde transmitter is compatible with RIDGID pipe locators.
  • Includes an always upright, self-leveling camera design with 768 x 494 video resolution (NTSC).
  • 1.365 Inches (35mm) Inspection Camera works with 2 to 12-inch diameter plumbing line with a maximum run of 200 feet (61 meters).
Check Stock

Pipe Center Finder, Pipefitter Tools w/Centering Head, Pipe Fitting Tools Center Finder Tool to Measure Pipe Diameter Over 0.5" and Up, 4" Y-Type Base Fitted with Adjustable Dial Bubble Protractor.

  • 【Economical Measuring Tool】This Pipe Marker Centering Tool is efficient and useful for setting center lines, determining angles and marks for butt-ins and locating points inside pipes or tanks, arranging keyways and calculating declivity. It can measure tanks or pipes with a diameter of at least 1/2" or larger..
  • 【Easy to Operate】Step1.Loosen or tighten the hexagonal nut with the included hex key allen wrench. Step2.Place the pipe marker tool on the pipe and find the angle you want. Step3.Push the center column down to the fixed point position. Step4.Tap with a hammer to leave a fixed point mark on the pipe..
  • 【Durable and Sturdy Material】The pipe fitter tool can wrap around the circumference of pipes to measure and mark, and it is made of a highly flexible, heat-resistant gasket material. This Pipe Center Finder Tool is easy to use for pipe fitters and welders as a must have tool..
  • 【Y-Head Shape Base with a DSL】This safety pipe center finder has a 4 inch Y-type base fitted with an adjustable dial bubble protractor (DSL). You could push the center column down to the fixed point position as you want. It is a must have on your list of pipe welding tools..
  • 【Adjustable Dial Bubble Protractor】Printed with a scale in inches, an inch chart and....
Check Stock

Sunex 1310 10-Ton Medium Height Pin Type Jack Stands, Pair

  • Item may ship in more than one box and may arrive separately.
  • Four leg steel base and support tube made of heavy schedule pipe foradded strength and stability.
  • Multiple hole locations in the support tube make pin facilitated height adjustment quick and easy.Number of Height Adjustments:6.
  • Height adjustment pin is attached to stand to prevent loss.
  • Large saddle with locating lugs support and position vehicle frame.
Check Stock

Underground Cable Tester, Wire Tester Portable Locator Wire Tracker , Detecting Wall and Underground Cables, Electrical Lines, Gas and Water Supply Pipeline Path

  • Detecting cables, electrical lines-water/gas supply pipelines buried in wall or earth.
  • Detecting and Locating breaks and short circuit in cables and electrical lines buried in wall or underground..
  • Detecting the laid metal tap water pipe and metal heating pipe..
  • Detecting interruptions and short-circuits in floor heating..
  • Detecting fuses and assigning current circuits,tracing sockets and junction boxes having accidentally been covered by plastering..
  • The transmitter is integrated with the function of AC/DC voltmeter, which can measure 12 to 400V AC/DC voltage on a linear basis..
  • Our products are included in English, if you have any difficulties in use, you can contact us to solve it..
Check Stock

Jackson Safety Pipe Marker Centering Head Tool, Curv-O-Mark Jumbo 7, To measure Pipes 1" and Up, Standard 8" Y-Type Head, Adjustable Dial Set Level, 14776

  • PIPE MEASURER – Designed for pipe fitters and welders as an measurer for setting center lines, establishing angles and marks for butt-ins, locating points inside pipes and tanks, laying out keyways, and measuring declivity.
  • JUMBO SIZE – Curv-O-Mark Jumbo #7 model digital angle finder tool used on pipes and tanks that measure 1" in diameter and larger.
  • Y HEAD – The center finder has a 8" Y type head fitted with adjustable dial bubble protractor (DSL).
  • BEST OPERATION – Use this Jackson Safety hardened centering pin angle finder with a small hammer or mallet to tap the pin in for the most effective pipe marking.
  • SAFETY STANDARDS – When it comes to providing innovative safety solutions, unparalleled features, long-lasting value, and comfort on the job, Jackson Safety has set the standard for the best protective gear and tools in the industry.
Check Stock

Adamas-Beta Serological Pipette,5mL Capacity,Standard Tip,Blue Striped,Individually Wrapped(Case of 50)

  • Ergonomical design for use in tight spaces.
  • Bidirectional graduations on the pipets provide added applicability.
  • Color coded stripes and packaging enable quick volume identification.
  • Printed indicator arrow for quickly locating negative graduations when using a pipet controller.
  • Minimize the adhesion of liquid to the pipe wall and improve sampling accuracy.
Check Stock

AC PERFORMANCE Stainless Steel -3 AN 3/8x24 Male Flare Union Splits Tee Block With Lug/Mount Tab/Locator, -3 AN to 2x AN3 Male Flare Coupling Union All Sides Hose Fitting

  • Male -3 AN to 2 x -3AN Flare (JIC -3, 3/8×24 thread) with Tab T Pipe Tee Block Hose Fitting Adapter.
  • Works with -3AN TEFLON PTFE Brake and Clutch Hose / Line, Design For Drift / Hydraulic Hand Brake application.
  • AN Male Flare Tee Tube Fitting with Locating Lug Mount Hole.
  • Male -3AN flare all sides Tee cross 3 ways pipe with lug tab locator SL fitting connector.
Check Stock