Categories

Best Pipe Repair Clamp

Roadformer 5" Exhaust Clamp Narrow Band Stainless Steel (2 Pack)

  • This 5" exhaust clamp is made in Stainless Steel. Used to joint 5 inch OD pipe slip fit into ID pipe for connection. Two pieces included in a single pack.
  • Pre-attached hardware for fast, easy and accurate installation, Roadformer Clamp technology provides simple, effective way to maintain and repair your exhaust system.
  • Grade 10.9 bolts provided superior capability of clamping and sealing. This narrow band clamp does create over a ton of clamping force without crushing pipes, resulting in strong and serviceable joint. The working torque is in the range of 40-50 ft-lbs.
  • Our innovation Reaction Block Technology provides a full 360-degree equal distribution of stretching force, prohibiting pipe distortion, durable installation without damage to pipe ends.
  • Roadformer Clamps set industry standard in premium quality and affordable price. Roadformer private labeled products do means Quality, Trust and Responsibility.
Check Stock

2" Exhaust Clamps Narrow Band Muffler Seal Clamp Exhaust Tip, Exhaust Resonator, Exhaust Manifold, Exhaust Flex Pipe, Project Catalytic Converter Repair Stainless Steel 2.0 inch 2PCS

  • 【Application】Seal exhaust clamp is the muffler repair part, narrow strap clamp can be used for Catalytic Converter, Exhaust Tips, Exhaust Manifold, Exhaust Resonator, Exhaust Flex Pipe, Exhaust Muffler Repair Projects..
  • 【Function】The narrow band clamp adds the mild steel semi-circular gasket parts, it can hold the pipe tightly without loosening. Distributes the cla amping force evenly over the entire 360° to prevent leaks and control material distortion. Unique seal and high clamp loads are provided, without distorting your exhaust components, allowing the flexibility to disassemble for service..
  • 【Easy to Install】Easy and less time consuming to install or remove with one bolt. This exhaust clamp is adjustable, has been tested for strength, and is reusable without damaging the pipes..
  • 【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

3 pcs 1/18" to 3-1/2" Exhaust Pipe Expander/Pipe Stretcher Kit/Muffler Pipe Expander/Tail Pipe Expander

  • ◇ Important : The previous product quality was not very good, we have asked the factory to improve the product quality, now the product quality is better than the previous one, please don't worry. If there is any quality problem, please contact us in time.
  • ◇ Features : This Tail Pipe Expander set includes three different expander sizes, can work to all 1-1/8inch to 3-1/2inch ID thin-wall pipes.
  • ◇ Funtion : The 3-Pieces Pipe Expander Spreader Tool Set is designed to quickly and easily straighten clamp dents and clamp marks in mufflers and tail pipes, and stretch pipe openings or fix damaged pipe ends. Can be use with a hand ratchet or breaker bar and also a hand wrenches.
  • ◇ Easy to use : Designed to quickly and easily straighten out clamp dents in mufflers .A simple wrench turn expands pipe for exhaust system repair and installation.
  • ◇ Contents: 1 X Small Expander: 1-1/8" to 1-3/4" 1 X Medium Expander: 1-1/2" to 2-1/2" 1 X Large Expander: 2-1/8" to 3-1/2" 6 X Extra O-Rings 1 X Blow Mold Storage Case.
Check Stock

EVIL ENERGY 2.75 Inch 2 3/4 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Joins 2.75" OD pipe to 2.75" OD pipe. Butt joint band 2.75" exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components....
  • Exhaust coupler clamps are serviceable, durability and reusable. Aslo can be used to repair exhaust pipes. Wrap some exhaust heat tape on the exhaust....
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. No....
  • Material: 304 stainless steel band, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Note: There is a flat face and arc curved....
  • EVIL ENERGY provide stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock

SCITOO 3-Pieces Pipe Expander Tool Set 1/18'' to 3-1/2'', Tail Pipe Expander Compatible with Most Vehicles and Trucks

  • ...rn the pipe support tool to expand the pipe, rather than electric Ratchet.
  • (3) Avoid twisting the expander with excessive force..
  • 【FEATURES】 This Tail Pipe Expander set includes three different expander sizes, can work to all 1-1/8inch to 3-1/2inch ID thin-wall pipes. A simple wrench turn expands pipe for system repair and installation..
  • 【SUPERIOR MATERIAL】 1pc small expander: 1-1/8" to 1-3/4", 1pc medium expander: 1-1/2" to 2-1/2", 1pc large Expander: 2-1/8" to 3-1/2, 6pcs extra O-rings. Drop forged and heat treated steel construction for strength and durability and through strict quality inspection. Suitable for family and professional mechanic. Plug and play, you can buy it with confidence..
  • 【ATTENTION】 Before purchasing this item, please double check the product details information. If you have any questions, feel free to contact us for help..
Check Stock

5/8' Aluminium Garden Hose Repair Connector with Stainless Steel Clamps, Male and Female Garden Hose Fittings, Mender End Repair Kit,Water Hose End Mender,Fit for 5/8' Garden Water Hose Fitting, 4 Set

  • Garden Hose Repair Connector：4 sets female and male hose repair connector with clamp, 8pcs Stainless steel clamp，8 extra Garden Hose Washer Rubbers.Fit for 5/8" hose fittings.Pipe joint diameter is 16-16.5mm, Standard 5/8" hose inner diameter is about 15.8-17mm, Our product is a little smaller than stand size which make it easy to insert or pull out 5/8" hose.with the stainless tightening clamp you can make it tightly as you want..
  • Aluminium Garden Hose Mender End Repair Kit : Female and male hose repair connectors are made of high quality aluminum, he surface oxidized to copper-like color，the clamps are made of stainless steel.Heavy-duty Aluminum metal construction with rust proof,Please note our connector are made of Aluminum , not brass.Our product Completely lead-free..
  • Easy to use : Easy to connect and disconnect, use to repair and connect the water hose end.Easy to install these garden hose end replacement by hands, 8 pieces stainless steel tightening clamp with rust proof for you to use or replace, effectively avoid leakage, it's good choice for your backup tool of hose mender..
  • Widely Application: These garden hose end replacement has a wide range of applications such as outdoor faucet, garden hose, hose splitter, filter, sprayer, sprinkle....
Check Stock

4 Sets 1/2 Inch Solid Brass Garden Hose Connector Hose Mender Water Hose Repair Kit Female Male Hose Coupling with Tape, Stainless Steel Clamp and 3/4 Inch Rubber Gasket

  • Please check the correct size before buying to avoid mistakes.
  • What’s included: the package brings you 4 sets 1/2 inch brass garden hose menders, 8 pieces stainless steel clamps, 8 pieces rubber gaskets and 1 roll tape, enough for you to use and replace, a nice combination to meet your requirements.
  • Reliable to use: our water hose repair end is made of solid brass which is rustproof and stable for you to use a long time, the clamp is made of stainless steel, not easy to break, help you to deal with much work problems.
  • Size information: the brass garden hose connector approx. 12 mm/ 0.47 inches in diameter and the hose repair mender is 13.5mm/0.53inch, which is fit for 1/2 inch garden hose for easily insert and remove hoses.
  • Suitable occasions: these practical coupling splicer menders, tape, clamps are your helper tools to apply in water faucet, garden hose and more places, as long as the size is fitting, the hose mender tools will be your useful assistant to repair broken pipe.
  • Simple to operate: our hose mender kits are easy for you to assemble, just install these end repair kits by hands directly, don’t need other complex tools, we provide you stainless steel clamp, which is sturdy and protect your pipe from leaking.
Check Stock

Hose Clamp TJBC 20 Pieces High-carbon Steel Adjustable 0.59-0.94 inch Range Worm Gear Hose Clamp Fuel Line Clamp for Plumbing Automotive And Mechanical Applications Silver 15-24mm

  • ...will not penetrate the steel belt. It can lock the high-pressure pipeline for a long time without sliding and deforming. The torque can reach 10-12KG..
  • ★ [Save time and money:] These stainless steel hose clamps can be installed on the joint of the hose pipe joint to prevent liquid leakage, thereby saving expensive repair time and money..
  • ★[Function and Use:] These clamps are firmly locked and are widely used to fix hoses, pipes, cables, pipes, fuel pipes, etc. It is very suitable for automobiles, industries, ships, shields, households, etc..
Check Stock

Hose Clamp TJBC 8 Pieces High-carbon Steel Adjustable 0.52-0.8 inch Range Worm Gear Hose Clamp Fuel Line Clamp for Plumbing Automotive And Mechanical Application Blue BTBC13-20

  • ...will not penetrate the steel belt. It can lock the high-pressure pipeline for a long time without sliding and deforming. The torque can reach 22-26lb..
  • ★ [Save time and money:] These stainless steel hose clamps can be installed on the joint of the hose pipe joint to prevent liquid leakage, thereby saving expensive repair time and money..
  • ★[Function and Use:] These clamps are firmly locked and are widely used to fix hoses, pipes, cables, pipes, fuel pipes, etc. It is very suitable for automobiles, industries, ships, shields, households, etc..
Check Stock

abcGoodefg 4 Sets Brass Garden Hose Mender Female and Male Hose Connector 5/8 Hose Fittings Garden Hose Adapter Water Hose End Replacement Repair Kit with Clamp and Rubber Gaskets

  • ...ing size before placing an order. Brass connector with the stainless tightening clamp you can make it tightly as you want. Work with your garden hose, sprayers, nozzle, etc..
  • Wide applications — This hose end replacement kit can be use to garden hose mender, end hoses male mender, end hoses female mender, hose repair mender. You can use them to repair or replace broken female or male hose connector, connect to male or female quick connector to lengthen the hose, use with water faucet, etc..
  • Easy to Use — This garden hose adapter use to repair and connect the water hose end. Easy to connect and disconnect when replacing the end of the garden hose, quick and easy, no additional tools are required, just by hand, suitable for using with garden hose, pipe tubing, and water equipment system, hose repair mender, etc..
  • Sturdy material — These hose fittings are made of brass, which is rustproof, corrosion resistance and durable, and the stainless steel hoop clamp can avoid garden hose leakage..
  • Packge Included — 4 Male Mender + 4 Female Mender + 8pcs stainless tightening clamp + 4 pcs rubber gaskets. Stainless clamp width is 10mm..
Check Stock

PONY 50 Clamp Fixture for 3/4 Inch Black Pipe

  • features crank-type handle and 1-3/4-inch square clamp faces.
  • Hardened steel construction with baked enamel fish with no holes, rivets, or notches.
Check Stock

2PCS Exhaust Clamps 3 Inch Butt Joint Exhaust Pipe Muffler Clamp Band Stainless Steel Connection for Cars

  • ... wide band of metal, usually stainless steel, wrapped around the exhaust pipe joint. Our products are preformed rings and are now more commonly used in high-end aftermarket exhaust systems that use slip fit because they are relatively inexpensive and can be reused without damaging the pipe..
  • Flexible Disassembly and Repair: The butt strap clamp is a simple and effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Offering unique sealing and high clamping loads, it does not distort your exhaust components and provides flexible removal and repair..
  • Save Time and Effort: Distribute the clamping force evenly over the entire 360° range to prevent leakage and control material deformation. It is easy to install or disassemble with one bolt, saving time and effort. T-304 strip stainless steel and carbon steel galvanized hardware..
  • Satisfied Customer Service - Both product quality and payment, will always be guaranteed. We are responsible sellers, always providing high quality products and best service. If you have any questions, please feel free to contact us and we will do our best to help you..
Check Stock

ESCULTORA 4PCS Hose Clamp Pliers, Spring Clamp Pliers, Self-Tightening Hose Clamps Remover Tool, Long Reach Wire Spring Hose Clamp Pliers for Automotive Fuel Oil Water Hose, Coolant Radiator Heater

  • HOSE PLIERS SET - Packing includes swivel flat band hose clamp pliers, long-reach cabled hose clamp pliers, vice grip, hose remover pliers. All 3 pliers have a locking function, when you open the self-tightening pipe clamp, the pliers can be locked to free your hands and speed up your repair work..
  • Easy to Use - The long reach wire spring hose clamp pliers tip can be rotated allow access to tight spaces and can be used at any angle. The maximum opening is 2 inches, locking ratchet can keep flat-type or ring-type hose clamp open for easy installation and removal. Ideal for opening fuel, oil, water hose or coolant pipe spring clip..
  • Design - Hose clamp pliers have swivel jaw, tip slot and multiple lock stops design for multiple angle access. The handle of plier wrapped in non-slip rubber, which can provide a comfortable grip and decrease hand fatigue during use..
  • High Quality - This hose clamp plier is made up of premium alloy steel, heat-treated and coated with black oxide to prevent rust and corrosion. Sturdy and durable, long service life..
  • GUARANTEE for YOU - We are committed to ....
Check Stock