Categories

Best Pipe Section

XIFOWE Copper Tube 1/4 OD x 3/16 ID 5 Ft Tube Wall 1/32 Refrigeration Seamless Round Pipe Tubing Soft Coil Copper Tubing Used In Refrigerators Freezers Air conditioners DIY projects Etc

  • 【Size】✔ 1/4" OD - 3/16" ID (6.35-4.75mm) | Tube Wall: 1/32" (0.8 mm) | Length: 5 Feet (1.524M). Note that the actual length of the copper tube is slightly longer than 5FT because it is measured manually. In addition, when we cut the copper pipe, we used a ring cutter, which will deform the section surface, resulting in a smaller inner diameter from the section surface. Please rest assured that this will only affect the size of the section surface, but not the actual size of the copper pipe..
  • 【Material】✔Soft copper pipe copper pipe is made of high quality copper material, the surface is smooth without seam. Note, because it is made of pure copper, so the surface is inevitably easy to oxidation and discoloration, can be polished with high mesh sandpaper, will become bright and clean!.
  • 【Good Thermal Conductivity】: Good heat dissipation and refrigeration capability, high strength at low temperature. This is a good choice for refrigerators, freezers, air conditioners and other refrigeration equipment.
  • 【Shape Changeable】Soft, Because copper pipe can bend and deform, they can often be made into elbows and joints. Smooth bending allows copper tubes to bend at any angle. Or used in manufacture of magnetism instruments or meters..
Check Stock

Portable, Progress Solar and Wind Powered Light Tower

  • Kit Includes (3) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *40' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • Features 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

Rohn 25G Series 50' Basic Tower Kit - Rohn 25G

  • INCLUDES: (4) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *50' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

Single 12-48V DC LED FAA L-810 Obstruction Light, Red, Stead-Burning

  • INCLUDES: (1) ROHN 45AG2 STANDARD 9' 6" TOP SECTION, (1) ROHN SB45G 5' SHORT BASE FOR EMBEDMENT IN CONCRETE, (3) 45G STANDARD 10' SECTION, (1) ACWS ANTI-CLIMB WARNING SIGN KIT, AND ROHN 45G SELF-SUPPORTING TOWER SPECIFICATIONS. *This kit is shipped via freight only, see below for more information* *Be sure your contact number is current on your order*.
  • The ROHN 45G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 45G Guides for Specifications and Installation Requirements*.
  • 1-1/4" OD, 14 Gauge legs 7/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on a 16 3/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 45AG2 Features a tapered top and integrated mounting pipe. The mounting pipe is 2.38" OD / 2.07" Mounting PipeOverall length is 9'6" - see images for measurement breakdown. See description below for more information..
  • 45G Weight: 70 lbs. 45AG2 Weight: 66 lbs. SB45G Weight: 32 lbs.
Check Stock

Motiv8 CAC Charge Air Cooler Inlet Hose Compatible with Dodge RAM 2500 3500 4500 5500 6.7L Diesel High Pressure Duct | 2 Clamps Included (2013-2018)

  • Direct fit for 2011+ Ford 6.7L Powerstroke.
  • Pipe Construction: Polished Aluminum Pipe Diameter: 2.75" Turbo Section, 3.0" Intercooler Section.
  • CNC-machined factory-style coupling allows for quick install.
Check Stock

ROHN 25SS040 40′ Self-Supporting Tower, No Ice

  • INCLUDES: (3) ROHN 25G STANDARD 10′ SECTIONS, (1) ROHN 25AG2 STANDARD 9′ 9″ TOP SECTION, (1) ROHN SB25G5 5′ SHORT BASE FOR EMBEDMENT IN CONCRETE, (1) ACWS ANTI-CLIMB WARNING SIGN KIT, AND ROHN 25G SELF-SUPPORTING TOWER SPECIFICATIONS.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • 1-1/4″ OD, 16 Gauge legs 5/16″ OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4″ equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. Note that the short concrete base can only be connected one ONE end. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24″ OD x 2.08″ ID Overall length is 9’9″ – see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

TAMA Tom Stand (HTS58F)

  • "for 10" to 14" diameter drums 19.1mm diameter base section tubing flat base leg design classic style basket single braced basket arms gearless tilter die-cast pipe joint / memory lock weight: 1.8kg (3.15lbs) height adjustment range: 565mm - 820mm (22 1/4" - 32 1/4") storage size: 600mm (23 5/8")(upper section) / 410mm (16 1/8")(lower section)".
  • Package Dimensions: 7.0 L x 59.0 H x 12.0 W (centimeters).
Check Stock

Big Dipper W-250-IS - 25 GPM Stainless Steel Automatic Grease Removal Unit

  • ... & outlet): 1.77 Inches / 4.5 cm. Length of the threaded pipe: 80 cm / 31.5 Inches.  Flowing speed up to 13 Gallons Per Minute (G.P.M.).
  • 【Upgraded Grease Trap】 Tee filter pipe design highly improves the filtering effect that oil floats on the surface, and the water flows from the bottom of the pipe to the next section. Special valve design for drain out all water, easy for you to clean the water tank. Made of heavy-duty 1.0 mm thickness stainless steel, which is strong and durable, anti-corrosion, not easily deformed. The double-layer edging process makes the edge feel more comfortable and will not cut your hands..
  • 【Working Principle】 Wastewater flows into the grease trap from the sink, the fats, oils, and grease will rise to the surface and be collected between the baffles. The water will sink and flow into next section from the bottom of the tee filter pipe. Food particles and grease are kept in the device. The removable filter basket can easily remove residual waste. The side outlet helps to take out any liquid for future clean up when needed..
  • 【Easy To Assemble】 Connect the pipe of the sinks and dishwasher to the Grease Trap inlet. Make sure to place it on a flat floor. Ideal for kitchen, restaurant, factory, school, or small sink or d....
Check Stock

Set of 3 - Advanced Drainage Systems 0664AA Downspout Adaptor, 6" x 4" x 6"

  • Plastic Universal Downspout to Drain Tile Adapter.
  • Universal coupling to fit INSIDE any 6" pipe including black corrugated landscape pipe, PVC SDR 28, 35, Schedule 40, clay & cast iron.
  • Size: Top inside dimensions: 6 1/8"x6 1/8" Bottom outside diameter: 5 3/4" that way it can easily fit INSIDE your 6" pipe.
  • The diameter of the round section is slightly smaller so it can fit INSIDE any 6" drain pipe you are going into..
  • Flexible tabs make it easy to secure into your drain pipe - Made for 6"x6" Downspouts - Proudly made in the USA!.
Check Stock

Rohn 25G 50' Tower with Hinged Base (Fold Over Base)

  • INCLUDES: (4) ROHN 25G STANDARD 10' SECTIONS (1) ROHN 25AG2 9' TOP SECTION (1) ROHN SBH25G 3' 4" HINGED SHORT BASE FOR EMBEDMENT IN CONCRETE. *All Installations using a hinged base MUST be guyed and/or bracketed. See our store for these items* *These bases are NOT rated for use in self-supporting applications*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design. *There are no wind/ice/load guidelines for this set up - you must consult a professional installer. We make no claims that this set up will handle any certain wind/ice/load specifications. This kit is offered as a convenience to our customers*.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more info....
Check Stock

Class A Customs 13 Gallon Water Tank & Plumbing Kit T-1300-BPK

  • ...t is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

MOCW 3.5" Cold Side Intercooler Pipe & Boot Upgrade Kit Compatible with 2011-2016 Ford 6.7L Powerstroke Diesel F-250 F-350 F-450, Silver

  • 【Features】-Color: Silver / Black. 3.5 inch intercooler piping kit. Fits Cold Side. Silicone Boots. One full year of warranty..
  • 【Compatibility】-Fit for Ford 6.7L Powerstroke Diesel 2011- 2016 F-250 F-350 F-450..
  • 【Durable Material】- Aluminum construction-rust free and heat dissipation for a long lifetime.Heavty duty four ply silicone boots and stainless steel T-bolt clamps..
  • 【Specifications】- Upper Section Pipe Diameter: 3.5 inches.
  • Silicone Boot 2: 3 inches to 3.5 inches..
  • 【Easy Installation】- Come with hardware and tools (as picture shows)..
Check Stock

Intex Solar Cover Reel, for 9ft - 16ft Wide Intex Above Ground Pools

  • ...ooth Operation. The Pool Cover Reel Has a Mechanical Lock To Prevent Rotation Of Roller When The Cover Is Rolled..
  • [ Fit 12 Feet To 22 Feet Pool ] - This Pool Reel Is Suitable For 5.9 Feet,12 Feet To 14 Feet And 18 Feet To 22.5 Feet Wide In-Ground Swimming Pools. Include 5-Section Aluminum Design Pipe, You Can Use One Section Tube For 5.9 Feet Wide Pool, Also Can Use 3 Section Tube For 12 Feet To 14 Feet And Use 5 Section Tube For 18 Feet To 22.5 Feet. Please Note That It Is Not Fit For 14.1 Feet To 17 Feet Pool..
  • [ Durable Aluminum Tube ] - Eco-Friendly PP/TPR Elastomer Qualified Turntable, Maintenence-Free, Rust-Free Construction: 5-Section Aluminum Pipe Design Are Easier To Support The Cover Not Easily Droop. Grooved Reel Tube Design Avoids The Strap Falling Off. Stainless Legs And Aluminum Reel Makes Nothing Rust. All The Part Above Makes The Nollapo Pool Cover Reel Thick And Solid..
  • [ Superior Quarity & Easy To Assemble ] - Lockable Lockable Telescopic Tube Can Prevent Shaking In The Process Of Use. Large Treaded Wheels And Sturdy Hand Crank Ensure Easy Operation. This Reel Has a Good Balance, Easy And Large Enough....
Check Stock