Best Pipe Thread Chaser

Brass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter,1/4\ Tube OD x 1/4\ NPT Male Connector 5pcs (1/4\ OD Compression x 1/4\ NPT Male)

• Tube OD Compression to NPT tube adapter for converting Standard National Pipe Thread (NPT) pipe to Aluminum, Plastic, and Copper straight compression thread pipe Tubing..
• Heavy-duty brass construction with rust proof, corrosion resistance, high temperature ductility and low magnetic permeability.

Drill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case (1/4\

• Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
• Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
• The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
• The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
• 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4.

Drill America - DWTPT1/8-1SET 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set, 1/8\

• Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
• Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
• The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
• The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..

LASCO 15-1701 3/4-Inch Female Garden Hose by 1/2-Inch Male Pipe Thread Brass Adapter

• 3/4-Inch female hose thread by 1/2-Inch male pipe thread.
• Used for adapting a garden hose to a pipe thread.
• Not for use in potable drinking water applications.
• 3/4 inch female garden hose thread x 1/2 inch male pipe thread.

Sealey VS724 Spark Plug Thread Chaser 12mm

ARP 912-0011 11mm x 2.00 Thread Cleaning Tap

• Package Dimensions: 24.1 H x 1.8 L x 14.5 W (centimeters).

Best Q M20 x 1.5MM Oil Drain Plug Thread Repair Kit Oil Pan Screws Rethread Tool

• M20 x 1.5MM Oil Drain Plug Tap Thread Repair Kit Oil Pan Screws Rethread Tool.
• Used to tap the damaged thread and slightly enlarge the diameter of oil drain hole, then fit a new drain plug and washer..
• Ideal for repairing sump, gearbox and differential drain plug threads..
• Suitable for 18mm engine oil screw after skidded and rethread by 20mm chaser then twist into 20mm screw + gasket..
• Contents: Tap: M20*1.5 1pc, Screw: M20 6pc, Aluminum gasket: M20 6pc.

Mueller Industries 109-814 Float Valves, 0.75 Inch

• Dual inlet thread for connecting pipe and locknut.
• Machined flange for support against tank wall.
• Dual inlet thread for connecting pipe and locknut, high tensile serrated arms, locknut included with male inlet valves.

Rustic State Industrial Pipe Wall Bracket Rust Oil Free 10 Inch Black Set of 2

• PIPE Type: black pipe 3/4" x 5 feet, male (NPT) National Pipe thread taper made of superior rough coating steel for commercial and residential application.
• PIPE SPECS: black coated schedule 40, 150 PSI.
• PIPE FUNCTION: Used for indoor in low pressure plumbing applications such as water, oil, natural gas, LP, steam and air.
• HIGH QUALITY: durable pipe steel materials manufactured using advanced technology.
• RATING APPROVALS: meets ASTM standards and NSI technical specification.
• EXTRA PROTECTION: shipped with plastic end caps to prevent pipe thread damage for the duration of transport.
• DECORATIVE USES: pipes can be used for decorative purposes for industrial feel in room décor, furniture, shelves and accessories..

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

• High quality materials: If you need to clean or re-thread damaged or jammed pipe threads, look no further than our NPT Thread Forming Taps. This 5-piece set includes 1/8", 1/4", 3/8", 1/2", and 3/4" pipe taps, each made of high-speed steel material for durability and long-lasting use. Our taps are forged from composite steel (GCR15) material, hardened to a higher hardness (traditional 45# carbon steel hardness is 44.
• 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. It is used for the repair of rusted, broken and slippery threads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
• Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..

SUPPLY GIANT OQCM2025-5 Nipple pipe, 2 in. x 2-1/2 in, Black, 5 Pack

• PIPE NIPPLE TYPE: pipe nipple fitting male NPT (National Pipe Thread) thread made of superior coating steel for commercial use residential application and all your DIY projects. Black coated schedule 40, 150 PSI.
• PIPE FUNCTION: nipple joins two pipes or extending length.
• HIGH QUALITY: durable pipe steel material manufactured using advanced technology.
• RATING APPROVAL: meets ASTM and ANSI standards.
• DECORATIVE USES: pipes can be used for decorative purposes for industrial feel in room décor, furniture shelves and accessories.

USA SEALING ZUSA-TF-PTC-526 Nylon Push to Connect Tube Fittings Female Branch Tee Black 1/4 PTC x 1/4 NPT Female

• Pipe Thread Material: Nickel-Plated Brass.

Rectorseal 25631 4-Ounce No. 5 Pipe Thread Sealant

• RECTORSEAL 5 pipe thread sealant multi-purpose, 1/4 pint – R514.
• Soft set slow drying compound which seals, lubricates and protects threaded pipe and fittings.
• Can be pressurized immediately for piping up through 2″ and 100 psi for natural gas, air and water only.
• Ideal for application with a wide variety of fluids and gases including potable water applications.
• Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe.