Categories

Best Pipe Thread Maker Tool

Steel Dragon Tools® 12-R Manual Ratchet Pipe Threader Kit 418 Oiler 460 Chain Vise 2A Cutter

  • Steel Dragon Tools 12R Manual Ratchet Pipe Threader Kit..
  • SDT 12-R will thread 1/2-inch to 2-inch pipe..
  • SDT 12-R comes with ratchet head, handle, steel tool box, six (6) die heads, and six (6) alloy dies..
  • Includes a Steel Dragon Tools 418 Oiler Bucket, 460 Tripod Chain Vise, and 2A Pipe Cutter..
  • Will work with RIDGID 700 Power Drive Pipe Threader 41935..
Check Stock

DRELD Male 5042 QCC1 Nut Propane Gas Fitting Adapter with 1/4 Inch Male Pipe Thread, Propane Quick Connect Hose Adapters Fittings, Solid Brass Outdoor Cooking Propane Adapter

  • >[PREMIUM MATERIAL]: High quality solid brass construction makes it corrosion resistant. 100 percent machined and all fits and seals. Works well, no leaks, high quality, no wrench required. Stamping fittings are available (hose and thread sides must be replaced)..
  • >[CONNECTION]: Converts QCC1/Type 1 Male and POL Female Connection to 1/4'' Inch male pipe thread. makes changing propane tanks so much easier, solved propane flow issues. can hand screwed it to the gas tank easily without using any tool. No gas leak on either side. It is well-made, seems to last for a long time..
  • >[THREAD]: One End Outer QCC1/Type Male Thread, Inner POL Female Thread. Other End 1/4 Inch Male Pipe Thread. The device is very useful, but be very careful not to overfill a disposable cylinder. Suitable for 2 - pound cylinder filling. Connectors have no built-in adjusters. There is a through hole..
  • >[EASY INSTALLATION]: Adapter shape and Easy to connect attachment and long-lasting durability.Don't use it around open flame or cigarettes or anything stupid like that. It's very safe. A good camper's tool. Be sure to keep the Coleman bottle in the refrigerator, cold spring, freezer, or freezer. Over time, the gas in the supplier's bottle will flow faster and the liquid will turn into g....
Check Stock

Brass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter,1/4\ Tube OD x 1/4\ NPT Male Connector 5pcs (1/4\ OD Compression x 1/4\ NPT Male)

  • Tube OD Compression to NPT tube adapter for converting Standard National Pipe Thread (NPT) pipe to Aluminum, Plastic, and Copper straight compression thread pipe Tubing..
  • Heavy-duty brass construction with rust proof, corrosion resistance, high temperature ductility and low magnetic permeability.
Check Stock

BLUEROCK Tools PTM50-C Electric Motorized Pipe Threader Threading Machine fits RIDGID Dies

  • Threading machine pipe capacity: 1/2"-2"(DN15-DN50).
  • 3 FUNCTIONS -- This electric threading machine has a 3 in 1 function—threading, cutting, and trimming. The clamping die is stable and reliable, the feed depth of the die can be adjusted for more accurate control.
  • The cutting knife and trimming knife adopt alloy steel blade, which is fast, stable and efficient..
  • POWERFUL MOTOR -- This 220V Pipe Threader applies 1HP/750W motor, it has compact structure and strong power. The speed is 23RPM, more efficient and labor-saving..
  • AUTOMATIC TOOL RETRACTION -- This Power Pipe Cutting Threader adopts the inclined block automatic tool retraction design, without manual control, and can greatly improve the accuracy when machining the thread length..
  • SELF OILING -- This Tube Cutter has an oil filling system with an oil reservoir, which fills oil through the head and has a constant flow..
Check Stock

Metal Homemade Sausage Maker- Vertical Meat Grinder Sausage Stuffer Kit With Filling Nozzles in 4 Sizes Grilling Party Molds Commercial & Home Kitchen Machine for BBQ Making Salami Cevapcici Hot Dogs

  • Package Information: You will receive a manual sausage maker and 4 horn filling nozzles in different sizes in the package, which can meet your....
  • Durable Material: Our meat grinder is made of high quality aluminum alloy, the blade is made of stainless steel and the funnel is made of thickened....
  • Tabletop Clamp Design: Our manual sausage maker is of tabletop clamp design, helping fix the meat grinder better, which allows you save more efforts....
  • Easy to Use: You can apply our manual sausage maker easily. First, install the thread spindle in the main pipe. Secondly, connect the handle and the....
  • Multiple Function: Our meat grinder is a good helper for you on cooking. You can use our meat grinder to mince meat and vegetables to make meat pies,....
Check Stock

Drill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case (1/4\

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4.
Check Stock

Drill America - DWTPT1/8-1SET 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set, 1/8\

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
Check Stock

LASCO 15-1701 3/4-Inch Female Garden Hose by 1/2-Inch Male Pipe Thread Brass Adapter

  • 3/4-Inch female hose thread by 1/2-Inch male pipe thread.
  • Used for adapting a garden hose to a pipe thread.
  • Not for use in potable drinking water applications.
  • 3/4 inch female garden hose thread x 1/2 inch male pipe thread.
Check Stock

Vakitar Badminton Racket Threading Tool, Portable Racket Eyelet Grommet Nail Cone Double Head Utility Tool for Racket

  • High Quality Material: The badminton racket threading tool is made of high quality stainless steel material, which is sturdy and durable.
  • Easy to Use: When using, you can directly rotate the tool clockwise and then pull it out, the operation is simple.
  • Double Head Design: The big one is used for single thread hole nails for tennis racket, the small one is used for badminton racket thread protection pipe nails.
  • Easy to Carry: With a small size of 4.3 inches long and a light weight of 0.8 ounces, it can be carried anywhere.
  • Satisfactory Service: If you have any questions about the products we received, you can contact us.
Check Stock

Belt Sander 1'' x 30''

  • (Hand Grinder to Sander) Simply Replace the Head Attachment of your Angle Grinder, you will get a handy belt sander..
  • (Easy Tube & Pipe Sanding) The Triangle Design of this Adapter allows you to sand the surface of a tube or pipe more easily and completely. Professional tool for removing metal rust..
  • (Precise Guide Pulley) The Design of the Guide Pulleys can make sure holding the belt tightly thus not going to sway and giving you a precise sanding work..
  • (Multi-Size Sanding Belt Applicable) Both 20mm and 40mm Sand Belts can be applied on this adapter for its double groove design..
  • (Material) Stainless Steel and Aluminum Alloy.
  • (Attachment Bearing) 5/8-11 US Thread Only.
  • (Notification) This product does NOT include a Grinder..
Check Stock

Rotary 14907 PK3 Mower Blades

  • ✅ RT1 = .375 inch Dia., RT2 = .75 inch Dia., RT2L = .75inch Dia., RT4 = 40mm, RT5 = 50mm..
  • ✅ Restore dent, dinged, or damaged threads in nuts and bolts within a minute with the RT2 Rotary Thread File! Restoring threads on the smallest bolts and getting into deep nuts without worrying about getting the right pitch is exactly what you’ll get with the RT2..
  • ✅ The ingenious universal design of our thread file is what makes it stand out from other thread files. All inch, metric and pipe threads have the same 60 degree "V" angle. This allows this tool to quickly work on any project, both internal and external threads..
  • ✅ The gland files are specifically designed for hydraulic cylinder glands and resurfacing seal areas.
  • restores snap ring grooves, keyways, grooves, glands, and square threads inside and outside.
  • ✅ SATISFACTION GUARANTEED: We at Rotary Thread stand behind our products and invest in product quality. Our US-based friendly customer service team is here for you and happy to help answer any questions you may have.
Check Stock

Professional Sports Ball Air Inflator Needle 3 pc Air Needle w/Adapter for Air Hose

  • Inflate footballs, basketballs & soccer balls with the same tool used by professional sports teams.
  • Converts needle inflator to match 1/4" fittings on standard 3/8" air hose for precision inflating.
  • 3-piece set includes non-rusting stainless steel 1-1/4" needle with side & tip air outlets.
  • 2 solid brass adapters step-up needle male pipe thread from 5/16" to 1/2" OD to fit 1/4" pipe size.
  • Closely-machined NPT threads form seal when torqued to provide non-leak performance.
Check Stock

86 Piece Metric and SAE Standard Tap and Die Bearing Steel Tools Set, Titanium Coated with Metal Carrying Case Amazing Tour

  • ➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock