Categories

Best Pipe Thread Tap Set

Drill America - DWTPT1/8-1SET 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set, 1/8\

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
Check Stock

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

  • High quality materials: If you need to clean or re-thread damaged or jammed pipe threads, look no further than our NPT Thread Forming Taps. This 5-piece set includes 1/8", 1/4", 3/8", 1/2", and 3/4" pipe taps, each made of high-speed steel material for durability and long-lasting use. Our taps are forged from composite steel (GCR15) material, hardened to a higher hardness (traditional 45# carbon steel hardness is 44.
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. It is used for the repair of rusted, broken and slippery threads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
Check Stock

Drill America - POU3/8NPTW/DRILL 3/8\ Carbon Steel NPT Pipe Tap and 37/64\ High Speed Steel Drill Bit Set, POU Series

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or Jam pipe threads.
  • Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
  • 3/8" carbon steel NPT tap and 37/64" HSS drill bit with 1/2" Shank.
  • Set contains matching NPT pipe tap and high speed steel drill bit.
Check Stock

Pipe Thread Tap High Speed Steel for Cast Iron Alloy Steel HSS G1/2-14 Pipe Thread Tap Cutting Tools

  • SCOPE OF APPLICATION: This tap is suitable for stainless steel, iron, cast iron, alloy steel, carbon steel, abrasive steel and other....
  • INFORMATION OF PRODUCT: The thread specification is G1/2in, the tap length is 8cm, and the useful length of the tap is 3cm. The shank diameter is....
  • WITH HIGH HARDNESS: Pipe Thread Tap is made of highspeed steel material, with high hardness, can be cut very well..
  • EXELLENT PERFORMANCE: This G1/2 Pipe Thread Tap is convenient to use and with good performance, with small size, easy to carry and store..
  • RELIABLE & DURABLE: Strict quality control and quality assurance, high safety factor, can be used with peace of mind..
Check Stock

BSP/BSPP British Standard Pipe Tap and Die Set - 18 Piece

  • BSP/BSPP (British Standard Pipe) Tap and Die Set - 18 Piece.
  • 1 taper tap, 1 bottom tap and 1 die in each size below:.
  • Taps are 1/8" - 28, 1/4" - 19, 3/8" -19, 1/2" -14, 5/8" - 14, 3/4" - 14.
  • Dies are 1", 1-1/2" and 2" OD Round Dies..
Check Stock

BSP BRITISH STANDARD PIPE BSPP PARALLEL TAP AND DIE SET - 8 SIZE 1/8 TO 1

  • BSP/BSPP (British Standard Pipe) Tap and Die Set - 24 Piece.
  • 1 taper tap, 1 bottom tap and 1 die in each size below:.
  • Taps are 1/8" - 28, 1/4" - 19, 3/8" -19, 1/2" -14, 5/8" - 14, 3/4" - 14, 7/8" - 14, 1" - 11 TPI.
  • Dies are 1", 1-1/2" and 2" OD Round Dies..
Check Stock

VCT PRO-GRADE 45PC LARGE-DIAMETER TITANIUM SAE STANDARD TAP & DIE THREADING TOOL SET

  • Professional Grade Set in Special High-Carbon Alloy Steel For Excellent Strength.
  • Includes: Adjustable & T-Handle Tap Wrenches, Adjustable Die Wrench, Screwdriver, Thread Pitch Gauge.
  • Titanium Cutting Edges Hold Sharpness up to 20x Longer Than Steel.
  • High Versatility The taps and dies feature coarse (UNC) fine (UNF) and national pipe (NPT) thread designations, ensuring usability in many hand threading applications..
Check Stock

Omninmo NPT Pipe Tap Set Thread Forming Taps High Speed Steel Drill Bits Thread Tap Attack Pipe Plate Hand Tapping for Cleaning or Re-thread Damaged or Jam Pipe Threads Size G3/4 55 Degrees

  • High Strength Material: Omninmo pipe tap set is different from the traditional carbon steel material. Our pipe taps is made of composite steel material, which is more durable and Higher hardness..
  • Professional Cutting Tools: Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
  • Convenient and Durable: Uncoated tools feature just the base substrate without any additional treatment or coatings,Carbon steel pipe taps are designed to clean or rethread to damage or block pipe threads,cuts internal threads in pipes..
  • Universal size: Nominal size of the tap is that of the pipe fitting being tapped. Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). The size is 3/4.Omninmo NPT Thread Forming Taps is ideal for pipe fittings..
  • Product Guarantee: If you have any questions, Please contact us in time, We will reply to you immediately to solve your problem..
Check Stock

1 - 11 BSPP Right hand Pipe Tap

  • 1" - 11 HSS British Standard Pipe Parallel right hand thread tap.
  • 1" is nominal pipe size - the actual thread major diameter is 33.249mm.
Check Stock

3/8 - 19 BSPP Right hand Pipe Tap

  • 3/8" - 19 HSS British Standard Pipe Parallel right hand thread tap.
  • 3/8" is nominal pipe size - the actual thread major diameter is 16.662mm.
Check Stock

Ruiwaer 1/2 inch NPT Thread Forming Taps Round Shank with Square End

  • The products are forged from high-quality bearing steel, with good surface treatment, high strength and good toughness..
  • Size of square end of product: 0.55 x 0.55 inch..
  • 1/2'' NPT pipe joint is mainly used for cleaning and thread chasing..
  • The product is mainly aimed at the repair of threads such as rust, fracture and slip of water pipe joints..
  • The product includes: 1 cylindrical pipe thread tap. Please pay attention to the finished size when purchasing..
Check Stock

1/4-18 NPT HSS Taper Pipe Tap, High-Quality High-Speed Steel 6542, Used For Conventional Machine Tapping Or CNC Tapping, Can Tap Steel And Stainless Steel.

  • 5/8" - 14 HSS American National Standard Taper Pipe right hand thread tap.
  • 5/8" is nominal pipe size - the actual thread dimension is greater than 5/8".
  • The angle between the sides of the thread is 60 deg.
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • CUT & RENEW THREADS: The ABN | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carb....
Check Stock