Categories

Best Pipeline Fitting

WildHorn Outfitters Pipeline Ski Goggle Replacement Lenses Clear Adult

  • Extra replacement lenses for the Pipeline ski goggles - Fits the Wildhorn cylindrical Pipeline snow goggles.
  • Get INCOMPARABLE VISION in our Pipeline ski goggles. You can’t ride if you can’t see. A HUGE cylindrical lens, flatter low-profile fit, and a....
  • Whether bluebird days or blizzards ADAPT TO ANY CONDITION in our Pipeline goggle. Featuring our famous Aurora Tech system which combines rare earth....
  • The Pipeline delivers a modern LOOK GOOD, FEED GOOD performance goggle ready to take on the mountain. With over 70 lens/frame color combinations....
  • As if we needed to convince you further, Wildhorn is an official supplier of the US SKI & SNOWBOARD team. We’re proud to work with this WORLD CLASS....
Check Stock

ISPINNER 15pcs 1/2 Inch Stainless Steel PEX Cinch Clamps, Crimp Rings Pinch Clamps for PEX Tubing Pipe Fitting Connections, Pack of 15

  • HIGH QUALITY MATERIAL - Made of 304 Stainless Steel, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties..
  • 360-Degree SEAL PROTECTION - These interlocking rings form a complete 360- Degree watertight seal, provide reliable and fast connection of all PEX pipes fittings..
  • WIDE APPLICATION - Widely used in all plumbing system, such as water heater, air condition system, pipeline system, hydronic heating system, electrical plumbing etc..
  • EASY INSTALLATION - Slip these pex clamps over the tubing, then slip tubing onto insert fitting. Use the correct cinch tools to close the clamp ear until it is fully engaged. Providing a strong, leak-free and reliable crimp fitting connection..
  • SIZE - 1/2 inch PEX clamps, fit for 15.0-17.5mm outside diameter pipe. Width x Thickness of 1/2 inch clamp is 7.0 x 0.8mm..
Check Stock

CVS 50 PCS 3/4 Inch PEX Cinch Clamp Rings, Stainless Steel Pex Fittings Crimp Rings Pinch Clamps for PEX Tubing Pipe Fitting Connections (3/4 Inch)

  • HIGH QUALITY - Meet ASTM F2098 requirements. Made of 304 Premium Stainless steel material. Salt resistant, anti rust, anti-corrosion..
  • EASY INSTALLATION - Slide the 3/4 inch PEX cinch clamp ring over the pipe, push the pipe onto the fitting and squeeze with your clamp tool. Providing a strong, leak-free and reliable crimp fitting connection..
  • WIDELY USED - Conversancy Brand products’ quality and performance is field-proven. Special design for all PEX pipe connection fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • CERTIFIED - Meet the same standards for all commercial and residential plumbing applications - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc..
  • SIZE - 3/4 inch (23.3mm) PEX clamps, fit for 3/4 inch PEX pipe..
Check Stock

NDS 909B 3

  • Protect your drainage system by using a grate on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining light water flows from small lawns, landscaped areas, patios, and walkways.
  • Fits 2 in. Sch. 40 Pipe, 3 in. Sewer and Drain Fittings. 8 GPM flow rate. 2.7 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installedrecommended for pedestrians, bicycles, and wheelchair traffic.
  • Place on top of drain pipe or drain fitting for a soil-tight fit. 3 in. Round Drain Grates with Collars are available in a variety of materials.
  • Comes with one 3 in. Round Grate and Collar. Hassle-free limited lifetime warranty guarantees the NDS product is free from defectsor well replace it.
Check Stock

NDS 910B 4

  • Protect your drainage system by using a grate on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining light water flows from small lawns, landscaped areas, patios, and walkways.
  • Place on top of drain pipe or drain fitting for a soil-tight fit. 4 in. Round Drain Grates with Collars are available in a variety of materials.
  • Comes with one 4 in. Round Grate and Collar. Hassle-free limited lifetime warranty guarantees the NDS product is free from defectsor well replace it.
  • Fits 3 in. Sewer and Drain Pipe, 4 in. Sewer and Drain Fittings. 16 GPM flow rate. 5.3 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installedrecommended for pedestrians, bicycles, and wheelchair traffic.
Check Stock

NDS 5

  • Protect your drainage system by using a grate on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining light water flows from small lawns, landscaped areas, walkways, and patios.
  • Fits 4 in. Sewer and Drain Pipe & Fittings, 4 in. Single-Wall Corrugated Pipe, 4 in. Triple-Wall Pipe. 13 GPM flow rate. 4.3 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installedrecommended for pedestrians, bicycles, and wheelchair traffic.
  • Place on top of drain pipe or drain fitting for a soil-tight fit. 5 in. Square Drain Grates are available in a variety of colors and materials.
  • Comes with one 5 in. Square Grate. Hassle-free limited lifetime warranty guarantees the NDS product is free from defectsor well replace it.
Check Stock

6 Pieces Balaclava Face Cover Sun Protection Cover Breathable Long Neck Cover for Outdoor Activities (Black, White, Coffee, Dark Blue, Navy Blue, Grey)

  • Protect your drainage system by using a grate on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining light water flows from small lawns, landscaped areas, walkways, and patios.
  • Fits 4 in. Sewer and Drain Pipe & Fittings, 4 in. Single-Wall Corrugated Pipe, 4 in. Triple-Wall Pipe. 12 GPM flow rate. 3.9 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installed—recommended for pedestrians, bicycles, and wheelchair traffic.
  • Place on top of drain pipe or drain fitting for a soil-tight fit. 4 in. Round Drain Grates are available in a variety of colors.
  • NOTE : This fixture NDS part#11 is a 4” round grate to fit 4” S & D fitting as well as Pipe in S & D as well as corrugated pipe.
Check Stock

NDS 50 6

  • Protect your drainage system by using a grate on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining light water flows from small lawns, landscaped areas, patios, and walkways.
  • Place on top of drain pipe, drain fitting, or Spee-D Basin for a soil-tight fit. 6 in. Round Drain Grates are available in a variety of colors and materials.
  • Comes with one 6 in. Round Grate. Hassle-free limited lifetime warranty guarantees the NDS product is free from defectsor well replace it.
  • Fits Spee-D Catch Basin Drain, 6 in. Sewer and Drain Pipe & Fittings, 6 in. Single-Wall Corrugated Pipe. 28 GPM flow rate. 9.1 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installedrecommended for pedestrians, bicycles, and wheelchair traffic.
Check Stock

100 PCS 3/4 Inch PEX Cinch Clamps, 304 Stainless Steel PEX Fitting Clamps Pinch Clamps Ring Crimp Rings for PEX Tubing Pipe Fitting Connections (Silver -3/4inch(100PCS))

  • ... with 360 Stepless Design. This stepless ear clamp conforms to the ASTM International F2098 standard for securing PEX tubing to insert fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • ✔【WIDE APPLICATION】Widely used in all plumbing systems, such as water heater, air condition system, pipeline system, hydronic heating system, electrical plumbing, etc. PEX barb fittings are compatible for potable water distribution and hydronic heating applications. Providing a strong and reliable crimp fitting application..
  • ✔【EASY INSTALLATION】Pex clamp rings slide the 3/4 in. clamp ring over the pipe, push the pipe onto the fitting and squeeze with your clamp tool to make a secure connection..
Check Stock

PVC Pipe Reamer with 1-½-Inch Head Aluminum, PVC Fitting Saver, PVC Socket Saver with 0.315″ Hex Shaft, For Water Lines, Drain Lines, Vent Lines

  • Robust Build Quality: This PVC fitting saver built with premium quality aluminum alloy body with stainless steel hex key shaft, durability and high hardness..
  • Feature: Whether you are a professional or not, Gohelper PVC reamer is excellent for you. It is works great for Schedule 40 PVC Pipe, CPVC and ABS Ventilation pipe, drain pipe, water pipe, but it does NOT work on schedule 80 pipe..
  • Compatibility: PVC fitting saver come with 0.315″ hex key shaft design can be compatible with standard drills, cordless drills, or impact drills. It is very suitable for family and temporary work..
  • Durable and Versatile: Square carbide insert provides four cutting surface, you can be turned 90 degrees for new cutting surface before use, the cutting efficiency is higher and faster..
  • Note: It is recommended to use a variable-speed electric drill with low-speed cutting.
  • Appropriately add water for cooling to prevent the pipeline from melting at high temperature,Check if the hex key shaft is locked or not before use. Warm tips: CN,US,EU Patent Pending..
Check Stock

Automotive Smoke Leak Detector Tester EVAP Smoke Machine with Dual Mode

  • ...es not rely on additional air machine, perfect for Mobile Automotive Repair! The smoke can be produced within 7-15 seconds, dramatically reducing diagnostic time. Smoke output value: 1-6L/min..
  • 【Flow Meter & Pressure Gauge】According to the pressure of the detection pipeline, it is controlled with a flowmeter to more effectively protect the pipeline from damage. By observing the pressure gauge, you can determine whether the pipeline is leaking more quickly and accurately. Usually the pressure gauge continues to rise, indicating that there is no problem with the pipeline. If the pressure gauge continues to decrease, Explain that the pipeline leak needs to be repaired..
  • 【EVAP Detection】American cars that began production in 1996 are equipped with EVAP service ports.
  • in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection syst....
Check Stock

Monster Energy Juice, Pipeline Punch,16 Fl Oz (Pack of 24)

  • UNLEASH THE BEAST: Banzai Pipeline, the world's most famous wave, on Oahu's fabled North Shore, comes alive for just a few brief months every winter. In honor of this epic force of nature, we created Juice Monster Pipeline Punch.
  • ENERGY + JUICE: The perfect blend of the best flavors Hawaii has to offer - passion fruit, orange & guava, then "Monsterized" with a full load of our famous energy blend.
  • STOCK UP WITH A 24 PACK: Banzai! Pipeline Punch Juice Monster is available in a convenient pack of 24.
Check Stock

PVC Fitting Saver with 1-½-Inch and 2 Inch Head Aluminum, PVC Pipe Reamer, PVC Socket Saver with 0.315" Hex Shaft, For Water Lines, Drain Lines, Vent Lines

  • Feature: Whether you are a professional or not, Gohelper PVC reamer is excellent for you. It works great on Schedule 40 PVC Pipe, CPVC and ABS Ventilation pipe, drain pipe, water pipe, but it does NOT work on schedule 80 pipe..
  • Robust Build Quality: This PVC fitting saver built with premium quality aluminum alloy body with stainless steel hex key shaft, durability and high hardness..
  • Durable and Versatile: Square carbide insert provides four cutting surface, you can be turned 90 degrees for new cutting surface before use, the cutting efficiency is higher and faster..
  • Compatibility: PVC fitting saver come with 0.315" hex key shaft design can be compatible with standard drills, cordless drills, or impact drills. It is very suitable for family and temporary work..
  • Note: It is recommended to use a variable-speed electric drill with low-speed cutting.
  • Appropriately add water for cooling to prevent the pipeline from melting at high temperature,Check if the hex key shaft is locked or not before use. Warm tips: CN,US,EU Patent Pending..
Check Stock