Categories

Best Pipeline Gate

IQIHUI 7PCS AC Fuel Line Disconnect Tool,AC Line Disconnect Kit,Transmission Oil Cooler Line Quick Disconnect Kit for Ford GM Mazda More Vehicles,Size1/4 5/16 3/8 1/2 5/8 3/4 7/8 Inch

  • 【Material】Fuel line quick disconnect heater hose disconnection tools are made of hard plastic to ensure strength and sturdiness..
  • 【Founction】Oil cooler pipeline quick disconnect kit, used to disassemble/disconnect fuel pipeline, heater pipeline, AC cooling pipeline and other quick disconnect fittings..
  • 【Application】The AC fuel line disconnect tool is compatible for most Ford, GM, Chrysler and Mazda models. It is also suitable for some other vehicles, and the automatic transmission line is within the size range..
  • 【Easy to use】The compact size is easy to grasp, and the inclined design allows access to hard-to-reach areas. Place the notch against the fuel line to release the lock and remove it..
  • 【Package】Transmission Line Removal Tool set contains 7 kinds of opening size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch..
Check Stock

Small Toilet One Piece Ceramic Toilet Compact Bathroom Mini Commode Water Closet Dual Flush Concealed Trapway red-300mm

  • 【8.0 enlarged pipeline】360° full pipeline glazing, 8CM thick pipeline design refuses to block The whole pipeline is glazing and flushing is more smooth. The silky glaze ensures that the dirt can pass quickly under the action of flushing, and it is not easy to stain.
  • 【Sea whirlpool jet siphon technology】Drawing on the principle of natural waterfall drop, scientifically design the inner wall of the toilet Make the water flow swirling down rapidly, tacit understanding of rushing and sucking with strong impulse triple push, instant clean without residue!.
  • 【Microcrystalline Zhijie Glaze】Multi-layer glazing is not easy to be stained. The surface calcined at high temperature is smoother, not easy to be stained, and it will be bright as new for a long time. (The high-temperature clay glaze is firm and durable, the low-glazed ceramic glaze is not easy to crack, the easy-to-clean glaze is not easy to stain, and the microcrystalline glaze is strongly boosted).
  • 【Easily Installed With All-in-one Package】Two big installation access on the side allows the plumber to install this toilet much easier. Package includes toilet, soft closing toilet seat, pre-installed flush valve, high-quality wax ring, floor bolts, and also installation instruction..
Check Stock

Baby Gate Stairs Banister Adapter-GRANDOTO Stair Y Threaded Spindle Rods for Pressure Mounted for Child & Pet Safety Gates with Extra Long Wall Mounting Screws Rod & Bolts (M8（8MM), Black)

  • More Adjustable & Extra Length Bolts: Baby gate banister adapter for stairs have enough length 4.7” (12cm). extra long wall mounting accessories screws rods adapter bolts, you may adjust sizes to reach your stair gate banister. baby gate stairs banister adapter may assure reliable stronger during installing. It may fit more places of baby gate banister. A good choice for replacement hardware parts kit for pet & dog & cat pressure mounted safety gates. Love baby gate stair adapter here.
  • More Sizes: Stair banister baby gate adapter spindle rods has M8 & M10 sizes. Please check your baby gate adaptor for stairs pressure mounted gates are use 8mm or 10mm diameter holes spindle. It is important as your select your correctly stairs adaptor for baby gate kit spindle holes sizes during installing baby gate spindle adaptor. Here has your target baby gate baseboard adapter. Just measure your stair adapter baby gate holes to check.
  • More Color: Baby gate stair banister adapter has more different color for your likes. You may select baby gate adaptors ‘s color as your home stairs style color for baby gate threaded spindle rod. Please find your like baby gate staircase adaptor. More baby gate adapter for bannister for your choice, do you like white or black baby....
Check Stock

316 Stainless Steel Compression Tube Fitting Union Straight Adapter Tube Double Ferrule Pipe Fitting Adapter for Pipe 2Pcs Ф1/2

  • 【316 Stainless Steel】 The double ferrule pipe fitting adapter adopt high-quality stainless steel 316 material,the inspection indicators are in line with the standard guaranteed spectrometer..
  • 【Good peformance without welding】The product has simple and firm connection, good sealing, no need for welding, high pressure resistance and vibration resistance..
  • 【Easy to clean】The surface of the joint is finely polished by a special process, the hand feels good and delicate, and the interior is clean and bright..
  • 【Suitable for complicated pipeline connections】Suitable for some complicated pipeline connections that cannot be welded, and can pass through gas, liquid, oil and general corrosion pipeline systems..
  • 【Comply with national standard】 The double ferrule straight‑through joint is a relatively common national standard joint, which serves as a connection between steel pipes..
Check Stock

Fit-Right 4'H Adjustable Chain Link Gate Kit - Galvanized

  • ANTI-SAG CHAIN LINK GATE KIT - This gate hardware kit has a patented truss cable system that keeps your gate from sagging or dragging. Use it to replace an existing old gate or build a new gate up to 72" wide. Use for chain link fence..
  • EASY TO INSTALL - The Adjust-A-Gate chain link gate kit is installed on-site to perfectly fit your gate opening every time. Build a gate up to 72in. Wide x 4ft. high..
  • COMPLETE GATE KIT - Includes everything you'll need to build a chain link walk through gate. Steel gate frame, galvanized chan link, lockable latch, gate hinges, steel wire ties. (posts and post hinges not included).
  • DRIVE-THROUGH DOUBLE GATE - Purchase 2 kits and a UL301 Drop Rod kit for building a double gate drive through up to 12' wide..
  • ADJUSTABLE - Telescoping bars fit gate openings from 24" wide up to 72" wide. Perfect for odd sized openings..
Check Stock

SANKINS Gate Helper Wheel for Supporting Metal Swing Gates with 1-5/8" Thru 2" Gate Frames, 6" Gate Support Wheel Prevent Gate from Dragging for Chain Link Fence, Black

  • [Gate Support Wheel Up to 500LBs] SANKINS sturdy gate wheel is made of tire-grade solid rubber and hot dipped galvanized finish steel. Support gate weight up to 500lbs, super wear-resistant, rust free for farm gates..
  • [Chain Link Fence Gate Helper Wheel] The designed U bolt and teeth for grip makes gate wheel work great on projects where gate frames with 1-5/8" thru 2" O.D. pipe. Check your gate frame pipe diameter first before your purchase..
  • [Gate Caster Max Lift Gate Up to 8-3/4"] Adjust the mounting angel according to your gate lift-up height to support your gate from sagging. From 0 degree to 90 degree, the gate caster can lift gate up from 3" to 8-3/4"..
  • [Easy to Install Gate Wheel] Just prop the gate up to the height you need and attach the gate wheel on the bottom pipe of the gate, using a wrench and tighten the U bolt with provided washers and nuts securely until the gate helper wheel does not slip around the pipe..
  • [Universal Use Gate Helper Wheel] SANKINS gate wheel rolls smoothly with bushing and bearings. The 1-3/4" wide gate wheel ca....
Check Stock

Fit-Right™ Chain Link Fence Walk-through Gate Kit (24'-72' wide x 6' high)

  • ANTI-SAG CHAIN LINK GATE KIT - This gate hardware kit has a patented truss cable system that keeps your gate from sagging or dragging. Use it to replace an existing old gate or build a new gate up to 72" wide. Use for chain link fence..
  • EASY TO INSTALL - The Adjust-A-Gate chain link gate kit is installed on-site to perfectly fit your gate opening every time. Build a gate up to 72in. Wide x 6ft. high..
  • COMPLETE GATE KIT - Includes everything you'll need to build a chain link walk through gate. Steel gate frame, galvanized chan link, lockable latch, gate hinges, steel wire ties. (posts and post hinges not included).
  • DRIVE-THROUGH DOUBLE GATE - Purchase 2 kits and a UL301 Drop Rod kit for building a double gate drive through up to 12' wide..
  • ADJUSTABLE - Telescoping bars fit gate openings from 24" wide up to 72" wide. Perfect for odd sized openings..
Check Stock

Sydien 20Pcs White 25mm/1" ID White PVC Water Pipe Clamps U-Shaped Buckles For Water Pipes & Tubing Hoses Support With Screws

  • ⭐Package Content: 20Pcs PVC Water Pipe Clamp & 20Pcs Wall Anchor & 20 Pcs x Screws.
  • Overall Size: 32mm*15mm*38mm/ 1.26" * 0.59" * 1.50"(L*W*H).Fits for tubes with 25mm/ 1" OD..
  • ⭐High Quality: Made of PPR plastic material ensuring abrasion-resistance and rust-resistance..
  • ⭐Space Saving: Water pipes or hoses can be firmly fixed on the ground or wall under the lock of the clip, which can make the pipeline more tidy and effectively save space..
  • ⭐Application: Suitable for water supply pipeline system and cable wiring pipeline system. Also used for laying and installation of water pipes, oil pipes, PEX pipes, etc..
Check Stock

Adjust-A-Gate Steel Frame Gate Building Kit (60'-96' wide openings, 5' - 6' high fence)

  • ANTI-SAG GATE KIT - This gate hardware kit has a patented truss cable system that keeps your gate from sagging or dragging. Use it to fix an existing gate or build a new gate up to 60" wide. Use for wood or composite 2-rail fence..
  • EASY TO INSTALL - The Adjust-A-Gate building kit is installed on-site to perfectly fit your gate opening every time. Just add wood or composite to match your fence..
  • REPAIR EXISTING GATES - Have an old sagging gate? The Adjust-A-Gate steel gate frame kit is the perfect solution for straightening and strengthening your old gate..
  • DRIVE-THROUGH DOUBLE GATE - Purchase 2 kits and a UL301 Drop Rod kit for building a double gate drive through up to 12' wide..
  • ADJUSTABLE - Telescoping bars to fit gate openings from 60" wide up to 96" wide. No cutting required..
Check Stock

Adjust-A-Gate Steel Frame Gate Building Kit (60\-96\ wide openings over 6' high fence)

  • ANTI-SAG GATE KIT - This gate hardware kit has a patented truss cable system that keeps your gate from sagging or dragging. Use it to fix an existing gate or build a new gate up to 96" wide. Use for wood or composite 3-rail fence..
  • EASY TO INSTALL - The Adjust-A-Gate building kit is installed on-site to perfectly fit your gate opening every time. Just add wood or composite to match your fence..
  • REPAIR EXISTING GATES - Have an old sagging gate? The Adjust-A-Gate steel gate frame kit is the perfect solution for straigtening and strengthening your old gate..
  • DRIVE-THROUGH DOUBLE GATE - Purchase 2 kits and a UL301 Drop Rod kit for building a double gate drive through up to 12' wide..
  • ADJUSTABLE - Telescoping bars to fit gate openings from 60" wide up to 96" wide. No cutting required..
Check Stock

8500mAh Ultra-Large Capacity Stand-able Mini 16GB TF Card DVR IP68 SYANSPAN Industrial Drain Sewer Pipe Inspection Video Camera Endoscope（10M DVR）

  • ...er camera best to fit for pipes at 20 -200mm (1 - 8 inch), camera with super flexible spring can easily go through 90° bend pipes at 20mm (8-inches). in order to get a better viewing, we also provide 25mm protective cover to make the camera can easily enter the middle of bigger pipes..
  • 【DVR Recording Function】: Pipeline Wall Sewer Inspection Snake Camera built-in SD Card slot,16GB TF card included,it is avialiable to view live video and save video clips and photos.You can record the inspections and playback via the pipe system.（DVR Edition).
  • 【10M-50M Cable Optional with Meter Counter】: SYANSPAN pipeline endoscope inspection camera equipped the scaled cable can show the cable length,can make you find the problems place more easily.There are 10M/20M/30M/40M/50M different length to choose from.The material of wire is fiberglass rod(diameter: 5MM),anti-corrosion/cold/tensile.
  • 【IP68 Waterproof&Night Vison】This pipe line endoscope camera has grade IP68 waterproofing and it can work in the 10 meters underwater.Equipped 6pcs high light white LEDs and 140°viewing angle,the inspection camera can easily view live video at any time and anywhere..
  • 【Versatile】: Drain Pipe/Sewer Pipeline Inspection Snake Camera can be used under floors, inside ....
Check Stock

Fit-Right Adjustable Chain Link Gate Kit | Square Corner Frame | 4' High-Expands from 24” to 72” Wide | Black

  • CUSTOM SOLUTION: Fit-Right Frame Adjustable Walk Gate Kit fits openings of 24" to 72" wide is ideal for when you need a custom solution for a special sized gate opening.
  • ANTI-SAG CHAIN LINK GATE KIT: This gate hardware kit has a patented truss cable system that keeps your gate from sagging or dragging.
  • EASY TO INSTALL: The Adjust-A-Gate chain link gate kit is installed on-site to perfectly fit your gate opening every time.
  • COMPLETE GATE KIT: Includes everything you'll need to build a chain link walk through gate. Steel gate frame, powder coated chan link, lockable latch, gate hinges, steel wire ties (posts and post hinges not included).
  • DRIVE-THROUGH DOUBLE GATE: Purchase 2 kits and a UL301 Drop Rod kit for building a double gate drive through up to 12' wide.
Check Stock

Lixada 90mm Guide Wheels Protective Cover for 23mm Pipe Sewer Pipeline Inspection Camera

  • --Black plastic cover fits 23mm camera head, and provides maximum protection..
  • --5 wheels easily go through pipes over 90mm..
  • --Great accessory for your valuable pipeline inspection camera system..
Check Stock