Categories

Best Piston Motor

CDHPOWER Super Motor PK80 Replaement with Iron Sleeve Cylinder 49mm Top End Cylinder Set and Bottom End Crank Set for 2 Stroke kit 66cc/80cc

  • CDHPOWER Super pk80 motor Replaement:Iron Sleeve Cylinder 49mm:Top End Cylinder Set and Bottom End Crank Set for 2 stroke kit 66cc/80cc pk80 motor kit.
  • High hole Piston kit installed well inside of cylinder and Long connecting rod AF80 or zmn80.
  • The casting cylinder head increases the horse power and this greatly cools off the engine. Would result better performance and longer life for your 2 Stroke Bicycle Engine. Casting cylinder head Height Max:51mm-52mm.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
Check Stock

Graco SaniSpray HP 20 Cordless Handheld Airless Disinfectant Sprayer

  • READY TO SPRAY: Comes with everything you need – just add disinfectant and get to work.
  • BRUSHLESS DC MOTOR: Dependable motor with spark-free operation provides ability to spray alcohol-based (flammable) chemicals.
  • FINISH SMALL JOBS FAST: Perfect for areas that require maximum portability.
  • TRIAX TRIPLE PISTON PUMP: Durable carbide piston built to deliver extended reliability and full tip support.
  • ADJUSTABLE FLOW CONTROL: Full range control delivers either complete coverage on specific objects or fine spray within an area.
Check Stock

CDHPOWER PK80 Motor Replacement of Top End Cylinder Set and Bottom End Crank Set for 2 Stroke kit 66cc/80cc

  • PK80 MOTOR REPLACEMENT PARTS ONLY. piston kit is installed well inside of cylinder already.
  • better adjusting Clutch a little before riding.
  • High hole Piston and Long connecting rod.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
Check Stock

Brake Caliper Compression Tool, Pneumatic Brake Caliper Tool with 2 Caliper Hangers, 25pc Brake Caliper Wind Back Tool Professional Brake Tool Set Fits American, European, Japanese Autos

  • 25-PIECE SET: This Orion Motor Tech pneumatic caliper piston compressor tool includes an air-powered compressor, 22 disc adapters, 2 brake hangers and a pair of gloves to easily, quickly, and securely finish the job.
  • keep your tools in the heavy-duty blow-molded case for easy organization, storage, and transportation between jobs.
  • EASY OPERATION: Choose the drive key you need and attach it to the piston wind back tool's magnetic pad, then connect the tool to your brake's airline, press the release button, and turn the rotating lever clockwise or anticlockwise to effortlessly repair or readjust your brakes.
  • UNIVERSAL COMPATIBILITY: This brake caliper set includes a large array of adapters to fit most vehicles, including hundreds of American, Japanese, and European models.
  • See below for a full list of compatible models.
  • BUILT TO LAST: The high quality brake piston compression tool's blackened aluminum-alloy body and sandblasted #45 carbon steel adapters steel disc adapters ensure long-lasting performance and corrosion resistance.
  • 1 YEAR WARRANTY: Service your brakes today with your peace of mind assured by our brake piston compression tool's strong 1 year warranty and Orion Motor Tech's usual friendly customer service.
Check Stock

Iwata-Medea Studio Series Ninja Jet Single Piston Air Compressor

  • Zero-maintenance, oil-less piston air compressor.
  • High-strength polyurethane hose fits Iwata airbrushes.
  • Includes a built-in airbrush holder and a carrying handle thats ready to go anywhere.
Check Stock

OMT Brake Caliper Wind Back Tool Kit, 24pc Brake Caliper Compression Tool Set with Thrust Bolt Assemblies Retaining Plates Caliper Hangers 18 Disc Adapters, Caliper Tool with Case, Black

  • COMPLETE BRAKE CALIPER TOOL SET: This Orion Motor Tech 24-piece brake piston compressor tool set includes 2 retaining plates, left and right thrust bolt assemblies, 18 disc adapters, 2 brake hangers, and a pair of gloves.
  • keep your tools in the heavy-duty blow molded case for easy storage and transportation.
  • EASY OPERATION: Attach the plate to the handle, select the disc adapter that fits your vehicle and rotate the pistons back into their calipers to clear your pads.
  • embedded magnets in each thrust bolt of this brake tool assembly easily hold your drive keys and adapters in place during use.
  • UNIVERSAL COMPATIBILITY: This disc brake caliper tool set includes a large array of adapters to fit most vehicles, including hundreds of American, Japanese, and European models.
  • see below for a full list of compatible models.
  • DURABLE BUILD: The sandblasted #45 carbon steel construction of our caliper piston tool ensures long lasting performance and corrosion resistance even after years of punishing use.
  • 1 YEAR WARRANTY: Service your brakes today with peace of mind thanks to our caliper piston ....
Check Stock

Makita MAC5200R 3.0 HP Air Compressor (Renewed)

  • Quiet Series compressor design at only 58 dB for operator and crew comfort.
  • Compressor runs at a lower RPM (1,750) resulting in longer motor and pump life.
  • Complete roll-cage construction provides the compressor with protection to withstand a variety of job-site, transporting, and storage environments.
  • Oil-free dual-piston pump designed for maintenance-free operation.
  • Compressor features a lightweight design for increased job site portability, an oil-free dual-piston pump designed for maintenance-free operation, and a cord wrap for convenient AC power cord storage.
Check Stock

NACHI Piston Pump

  • 1.A10VO series of axial piston pump will have 35 MPa pressure pure hydraulic oil input to all kinds of hydraulic press, hydraulic motor and hydraulic system, to generate huge motivation.
  • 2.This pump can be used as a hydraulic motor..
  • 3. According to the needs, this pump has a variety of variable form. The oil pump, oil motor is widely used in ship, aviation, mining, metallurgy, casting, forging, machine tool of all kinds of machinery.
  • 4. ts characteristic is small in volume, high efficiency, long service life, advanced design, compact structure, convenient maintenance..
  • 5.We will arrange the faster express to deliver your order with free shipping（ DHL UPS FEDEX TNT EMS ）,you will receive it within 7~10days.
Check Stock

Niteo Motor Medic MFD1 Synthetic Motor Flush - 32 oz.

  • Recommended for use in all gasoline and diesel engines, including all turbo-charged engines.
  • Safe for use in engines that use conventional or synthetic motor oil.
  • Removes accumulated gum, varnish and sludge from internal engine parts.
  • Allows oil to circulate freely to all parts of the motor.
Check Stock

Walfront 12V 0.9A Water Pump Mini Self Priming Single Cylinder Piston Pump with 10 Meters Lift Portable Low Noise, Various Pumps And Accessories

  • Great practicability: Piston pump can self-prime and can output relatively large pressure.
  • Made of high quality electronic components, stable and reliable performance..
  • Improved configuration: The pump head is equipped with a check valve, which can control the fluid quality, reduce leakage and improve the working efficiency of the pump..
  • Advanced coupling structure: Adopting the coupling structure to reduce the radial and axial pressure of the motor, the motor runs more smoothly..
  • Live up to expectations: This water pump has sealed switch and coating to prevent corrosion, the body is sealed, to prevent incidental moisture and dust from entering. More resistant to corrosion and high temperatures, more durable..
  • Pump working mode: Single cylinder piston.
  • Inlet and outlet: 6MM outer diameter (6x9MM silicone tube is recommended).
Check Stock

Happybuy Electric Hydraulic Rebar Cutter, 900W Portable Electric Rebar Cut 5/8' 16mm #5 Rebar within 3 Seconds, 110V

  • ...ot easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its original position..
  • One Button Operation: This electric rebar machine is equipped with an ergonomic back grip design to facilitate maneuverability and ease of use. Simply keeping the switch pressed, the bending block starts to push forward. It is easy to bend rebar even in high air and is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

VEVOR 1.5 KW Electric Rebar Bender, 1''(25 mm) Hydraulic Electric Hand Held Rebar Bender, within 5 s, 110 V

  • ...ot easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its original position..
  • One Button Operation: This electric rebar machine is equipped with an ergonomic back grip design to facilitate maneuverability and ease of use. Simply keeping the switch pressed, the bending block starts to push forward. It is easy to bend rebar even in high air and is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

Niteo Motor Medic MFD1-12PK Synthetic Motor Flush - 32 oz, (Case of 12)

  • Recommended for use in all gasoline and diesel engines, including all turbo-charged engines.
  • Safe for use in engines that use conventional or synthetic motor oil.
  • Removes accumulated gum, varnish and sludge from internal engine parts.
  • Allows oil to circulate freely to all parts of the motor.
Check Stock