Best Piston Rod In Cylinder
ACDelco Professional 530-300 Premium Gas Charged Rear Shock Absorber
- a hardened, chromed piston rod with micro cracks provides an ultra-smooth, self-lubricating, corrosion- and scratch-resistant surface, helping....
- drawn over mandrel (dom) pressure cylinder for high quality sealing properties and reduced internal friction to assist with longer product life.
- gas charged for reduced fluid aeration, which can result in better response, less foaming, and more consistent control than non-gas charged shocks.
- full perimeter, multi-lip, piston rod seal is permanently lubricated and helps keep dirt and contaminates from reaching the interior of the rod.
- o-ring hydraulic piston seal resulting in minimized piston blow-by and consistent control.
Check StockCDHPOWER Super Motor PK80 Replaement with Iron Sleeve Cylinder 49mm Top End Cylinder Set and Bottom End Crank Set for 2 Stroke kit 66cc/80cc
- CDHPOWER Super pk80 motor Replaement:Iron Sleeve Cylinder 49mm:Top End Cylinder Set and Bottom End Crank Set for 2 stroke kit 66cc/80cc pk80 motor kit.
- High hole Piston kit installed well inside of cylinder and Long connecting rod AF80 or zmn80.
- The casting cylinder head increases the horse power and this greatly cools off the engine. Would result better performance and longer life for your 2 Stroke Bicycle Engine. Casting cylinder head Height Max:51mm-52mm.
- Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
- fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
- Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
Check StockACDelco Professional 530-298 Premium Gas Charged Front Shock Absorber
- A hardened, chromed piston rod with micro cracks provides an ultra-smooth, self-lubricating, corrosion- and scratch-resistant surface, helping increase seal life.
- Drawn over mandrel (DOM) pressure cylinder for high quality sealing properties and reduced internal friction to assist with longer product life.
- Gas charged for reduced fluid aeration, which can result in better response, less foaming, and more consistent control than non-gas charged shocks.
- Full perimeter, multi-lip, piston rod seal is permanently lubricated and helps keep dirt and contaminates from reaching the interior of the rod.
- O-ring hydraulic piston seal resulting in minimized piston blow-by and consistent control. Dust Shield.
- Fits: GMC- 2007 Sierra 1500 Classic, 2001-2004: Sierra 2500 HD, 1999-2006: Sierra 1500, 1999-2004: Sierra 2500.Chevrolet- 2007 Silverado 1500 Classic, 2001-2004: Silverado 2500 HD, 1999-2006: Silverado 1500, 1999-2004: Silverado 2500.
Check StockACDelco Professional 530-189 Premium Gas Charged Rear Shock Absorber
- A hardened, chromed piston rod with micro cracks provides an ultra-smooth, self-lubricating, corrosion- and scratch-resistant surface, helping increase seal life.
- Drawn over mandrel (DOM) pressure cylinder for high quality sealing properties and reduced internal friction to assist with longer product life.
- Gas charged for reduced fluid aeration, which can result in better response, less foaming, and more consistent control than non-gas charged shocks.
- Full perimeter, multi-lip, piston rod seal is permanently lubricated and helps keep dirt and contaminates from reaching the interior of the rod.
- O-ring hydraulic piston seal resulting in minimized piston blow-by and consistent control.
- Fits: Chevrolet- 1988-2003 C3500, 1988-1999: K1500, C1500, 1988-2000: K3500, K2500, C2500. GMC- 1988-2000: K3500, K2500, GMC C3500, GMC C2500, 1988-1999: GMC K1500, GMC C1500,.
Check StockEnerpac - RC102 RC-102 Single-Acting Alloy Steel Hydraulic Cylinder with 10 Ton Capacity, Single Port, 2.13\ Stroke
- Single-acting hydraulic cylinder with one port and pretensioned spring return of piston rod after 2.13" stroke.
- Round body with single piston rod for use in general purpose applications in any position.
- High-strength alloy steel with baked enamel finish for corrosion resistance.
- 10-ton cylinder capacity for lifting or pushing.
- Quick-connect CR-400 female coupler for connection to a CH-604 male coupler (sold separately).
Check StockCDHPOWER 2 Stroke LD90 Motor w/o CDI -Upgraded pk80 Motor Silver Color Engine-Gas Motorized Bicycle 66cc/80cc
- CDHPOWER LD90 Motor w/o CDI and Excluding 2pcs anti vibration black rubber for the motor mount,upgraded pk80 motor.
- better adjusting Clutch a little before riding..
- Includinhg spark plug and piston kit;Excluding two head plug CDI Box ( Asin for two head plug CDI: B098Q988VJ ).
- High hole Piston and Long connecting rod.
- Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
- fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
- Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
- FYI: the LD90 motor is compatible with all brand 2 stroke 66cc/80cc gas motor kit.
Check StockZKTOOL 11PC Compression Tester, Automotive Engine Compression Tester Adapter Kit, Engine Cylinder Leak Down Compression Test Motor Pressure Gauge. (All Vehicles).
- Function: The cylinder compression tester kit is used to quickly and accurately test the cylinder pressure of gasoline engines. Meter readings can help diagnose the following problems: stuck valve, carbon deposits, cracked cylinder head or defective main gasket, poor or worn piston ring installation, burned or damaged piston..
- Packing: Including 10 connection adapters --- 11-in-1 engine tester gauge kit including 1 piece spring buckle gauge.
- 5-piece brass adapter M10, M12, M14, M16, M18, widely used.
- a 200mm metal Extension rod connector, two 50mm metal aluminum rod straight and bent rod, an extension rod hose with M12*1.25 thread..
- Application: Gasoline engine cylinder --- equipped with different sizes of rotating and push-in adapters, widely used in most types of gasoline gasoline gas engine cylinders and deep spark plugs, common in motorcycles, lawn mowers, cars, trucks, ATV and many more. Not suitable for diesel engines..
- Stable quality tester: Maximum 300PSI or 20BAR dual pressure device, with easy-to-read large dial, acrylic glass meter cover with scratch-resistant coating and rubber protective cover with excellent shock absorption performance. The built-in one-way valve with pressure holding function ensures that the pressure gauge obtains the ma....
Check StockMYFULLY Office Chair Cylinder Replacement | Chair Gas Lift Cylinder 5 inch Long Extension Stroke Adjust Universal Size Lift Cylinder Fits Most Executive Chair Swivel Chair
- Heavy Duty Office Chair Cylinder: The gas lift cylinder holds up to 385lb/175kg on most Swivel chairs. Hydraulic pneumatic shock piston is certified by SGS,high safety and explosion-proof,more durable..
- 5" Piston Stroke for Adjusting Chair Height: Outer cylinder diameter: 1.9".
- Smooth Operation & Noiseless: This chair cylinder replacement uses upgrade stainless steel lift rod. Full 360 degree rotation, smooth and noiseless movements to all directions..
- Universal Chair Cylinder: Our office chair piston will fit most office, executive and computer chairs.(salon chairs, executive chairs, work chairs, rolling stools) on the market..
- Easy to Install: This office chair cylinder replacement can be installed easily with no additional screws required. Take several minutes to refresh your old office chair and save costs! Package includes: a gas cylinder for office chair.
Check StockSydien 20mm Bore 250mm Stroke Pneumatic Air Cylinder Single Rod Double Action with Y Connector and 4Pcs Pneumatic Quick Fitting
- Package Content: 1 Pcs x Mini Pneumatic Cylinder with 1 Pcs x Y Connector & 4 Pcs x Pneumatic Quick Fitting..
- Made of aluminum alloy and metal, thickened cylinder body, high quality sealing rod, imported grease..
- Two screw hole connections to get the air in and out, and a rod connected to the plunger that goes in and out..
- Cylinder is a mechanical devices which utilize the power of compressed gas to produce a force in a reciprocating linear motion..
Check StockKYB 339243 Excel-G Gas Strut Black
- #1 recommended Original Equipment replacement choice for Asian cars.
- Specifically calibrated to help restore the original handling and control characteristics of your Toyota Prius.
- Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life.
- Triple chrome plated piston rod and multi-lip oil seals that reduce wear.
- Features a precision, sintered iron strut rod guide to help retain correct wheel alignment.
Check StockKYB 235920 Excel-G Gas Strut, Black , Silver
- KYB recommended OEM replacement shock for performance cars.
- Specifically calibrated to help restore the original handling and control characteristics of the Ford Mustang.
- Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life.
- Triple chrome plated piston rod and multi-lip oil seals that reduce wear.
- Features a precision, sintered iron strut rod guide to help retain correct wheel alignment.
Check StockMingdun 4 Sets Cylinder Head Cover Bolts 66cc 80cc 2- Srtoke Engine Motorized Bike
- Includes the following components: Cylinder, Cylinder Head,, Piston, Piston Rings, Piston Pin, Circlips, Connecting Rod Bearing, Spark Plug,, Head Gasket, Base Gasket, Reed Valve, Reed Valve Gasket, Exhaust Gasket, Fan Cover.
- Alpha Sports Kolt 50 and LG 50 2-stroke 50cc ATVs.
- E-Ton 50cc 2-Stroke Beamer scooters: Beamer PN2Beamer II PN2B, Beamer III PN2D, Beamer Matrix PN2C, Beamer Matrix II PN2E, Beamer R2-50 PN2G, Matrix 50 PN2H.
- E-Ton Viper 50 (RXL-50), Viper 50 Mini (RXL-50M), Lightning 50 (AXL-50 / NXL-50), Impulse 50 (TXL-50) 2-stroke ATVs.
- compatible with Polaris Predator 50, Scrambler 50 and Sportsman 50 2-Stroke ATVs.
Check StockMOOSUN Cylinder Piston Gasket Top End Kit Fits 1988-2006 Yamaha Blaster 200 YFS200
- 【BLASTER 200 CYLINDER TOP END KIT】Compatible with 1988-2006 Yamaha Blaster 200 YFS 200.
- 【SPECIAL FUNCTION】MOOSUN Blaster 200 Cylinder replacement piston sets engineered from premium materials to provide exceptional service life and....
- 【BLASTER 200 CYLINDER HEAD PISTON FEATURE】Cylinder piston set is the heart of engine. MOOSUN Cylinder has been factory honed and deburred to help....
- 【PART NUMBER】2XJ-11111-00-00, 2XJ-11311-02-00,2XJ-11181-00-00, 2XJ-11631-01-97, 3JM-11351-02-00, 3JM-13621-00-00, B8E-S0000-00-00,....
- 【CYLINDER PISTON RING GASKET KIT COMES WITH】1 x Cylinder, 1 x Piston, 1 x Piston Rings, 1 x Wristpin, 2 x Circlips, 1 x Needle Bearing, 1 x Head....
Check Stock