Categories

Best Piston Rod Valve Body

Belltech 8504 Pair of Rear Nitro Drop 2 Shock Absorbers for Silverado Colorado Sierra Ram Tradesman 4WD RWD

  • Designed for the daily driver to provide factory style ride comfort with better road feel and grip.
  • Application specific shock set designed for your vehicle.
  • Metal dust boot, hardened chrome 12.5mm piston rod, triple lip NBR rod seal, and teflon guide bushing.
Check Stock

Belltech 8530 Pair of Rear Nitro Drop 2 Shock Absorbers for S10 Blazer Colorado Canyon Jimmy Sonoma 4WD RWD

  • Designed for the daily driver to provide factory style ride comfort with better road feel and grip.
  • Application specific shock set designed for your vehicle.
  • Metal dust boot, hardened chrome 12.5mm piston rod, triple lip NBR rod seal, and teflon guide bushing.
Check Stock

DNJ EK1105M Master Engine Rebuild Kit for 2002-2003 / Dodge, Jeep/Liberty, Ram 1500/3.7L / SOHC / V6 / 12V / 226cid / VIN K

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Balance Shaft Bearing Set, Main Bearings Set, Rod Bearings Set, Head Gasket Set, Lower Gasket Set, Thrust Washer, Freeze Plug Set (Brass), Timing Chain Kit, Oil Pump.
  • FITS: 02-03 Dodge, Jeep / Ram 1500, Liberty 3.7L V6 SOHC Naturally Aspirated.
  • FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, Master Kit Engines w/ Stamped Steel Valve Covers, Master Kit, w/ Steel Valve Covers.
  • You are assured to receive a worldwide proven Master Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

Hydraulic Welded Bottle Jack 50T(110,231lbs) Capacity for Auto Repair and House Lift, Red

  • 【POWERFUL LIFTING FORCE】The smooth surface of the piston rod is beautiful, ante-corrosion, and also has strong pressure resistance, with a strong lifting force of 50T/110,231 lbs. .
  • 【SUFFICIENT LIFTIING HEIGHT】In addition to the height of the jack body (10.23in), the piston rod (5.9in) and screw rod (2.36in) can be raised to increase the stroke, so that the jack can be lifted higher (up to 18.5in) to a wider range of uses..
  • 【HIGH/LOW-TEMPERATURE RESISTANCE】The hydraulic system uses high-quality lubricants for better corrosion resistance and high/low-temperature flexibility allowing it to operate at temperatures between -4°F and 113°F..
  • 【COMPACT AND PORTABLE】Its compact size is suitable for narrow and low working spaces, and can be easily carried in the trunk of a vehicle. In addition, the bottle jack has a handle that makes it easy to move and carry to any location. .
  • 【HIGH SAFETY】The bottle jack is equipped with a safety valve that can automatically protect the hydraulic system in case of overload to prevent damage to the jack. At the same time, the height-....
Check Stock

Happybuy Electric Hydraulic Rebar Cutter, 900W Portable Electric Rebar Cut 5/8' 16mm #5 Rebar within 3 Seconds, 110V

  • ...ot easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its original position..
  • One Button Operation: This electric rebar machine is equipped with an ergonomic back grip design to facilitate maneuverability and ease of use. Simply keeping the switch pressed, the bending block starts to push forward. It is easy to bend rebar even in high air and is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

Mingdun 4 Sets Cylinder Head Cover Bolts 66cc 80cc 2- Srtoke Engine Motorized Bike

  • Includes the following components: Cylinder, Cylinder Head,, Piston, Piston Rings, Piston Pin, Circlips, Connecting Rod Bearing, Spark Plug,, Head Gasket, Base Gasket, Reed Valve, Reed Valve Gasket, Exhaust Gasket, Fan Cover.
  • Alpha Sports Kolt 50 and LG 50 2-stroke 50cc ATVs.
  • E-Ton 50cc 2-Stroke Beamer scooters: Beamer PN2Beamer II PN2B, Beamer III PN2D, Beamer Matrix PN2C, Beamer Matrix II PN2E, Beamer R2-50 PN2G, Matrix 50 PN2H.
  • E-Ton Viper 50 (RXL-50), Viper 50 Mini (RXL-50M), Lightning 50 (AXL-50 / NXL-50), Impulse 50 (TXL-50) 2-stroke ATVs.
  • compatible with Polaris Predator 50, Scrambler 50 and Sportsman 50 2-Stroke ATVs.
Check Stock

VEVOR 1.5 KW Electric Rebar Bender, 1''(25 mm) Hydraulic Electric Hand Held Rebar Bender, within 5 s, 110 V

  • ...ot easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its original position..
  • One Button Operation: This electric rebar machine is equipped with an ergonomic back grip design to facilitate maneuverability and ease of use. Simply keeping the switch pressed, the bending block starts to push forward. It is easy to bend rebar even in high air and is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

Rancho RS55042 RS55254 Set of 4 Front and Rear RS5000X Shock Absorbers Compatible with Ford F-250 F-350 Super Duty Includes a TrendsAuto Decal Sticker

  • Progressive Engagement Valving / Tuned Compression Control Valve / Enlarged 2-1/4-inch Twin Tube Body / Gas Pressurization of Shock.
  • 16 mm Nitro-Carburized Rod / Full-Displaced 35 mm Bore / 1-3/8-inch Diameter Sintered Iron Piston / Rebound Bumper.
  • Black, Natural Rubber Bushings / Low-Friction, Self-Lubricating Seal / Protective Boot / Glass-Filled, Fluon Banded Piston / Double-Welded Loops.
Check Stock

Longray SP4A Stainless Steel Sprayer, 1 Gallon, Metallic

  • 【All Stainless Steel Structure】- the pump, box, cover, rod, pump handle and rod handle are all made of durable stainless steel. Braided durable hose， not cheap plastic - with Viton seals and gaskets.
  • 【HAND-PUMPED SPRAYER】- This sprayer boasts large flow piston rod with humanized handle, it is designed for easy use and also for quickly building up air pressure with no need for outlet or extension cord.adjustable spray is perfect for misting.
  • 【WIDE-MOUTH WATER INLET】- This sprayer boasts valve and pressure gauge that can provide convenience and ensure safety.Large Wide Mouth opening allows for easy filling and cleaning and less spilling..
  • 【FOR MULTI-PURPOSE】- Built-in fast and accurate pressure gauge, suitable for the actual needs of industry, agriculture, commerce and medicine.
  • [Note]-We provide 1 gallon 1.5 gallon 2.5 gallon 3 gallon 3.5 gallon stainless steel sprayer, blue film, the film is scratch-resistant and does not need to be torn.
  • the liquid is on the piston rod, only hydraulic spraying is required.
Check Stock

304 Stainless Steel Balanced Float Ball Valve Tank Mount 100 Psi 1 inch NPT Male…

  • Balance pressure between piston and Valve, as well as smaller ball and shorter rod can bear high pressure..
  • Adjustable water level. Ball valve is used in pipelines to cut off, distribute and change the flow direction of the medium Widely used in magnetic level switch and liquid level measurements..
  • Made of 304 stainless steel. Its applicable medium is water, can withstand wide temperature of -10℃ to 120℃.
  • Stainless Steel Rod for Float Valve, 1/4" thread, 6.3" Length, and 4" Stainless Steel Float.
  • Works great for water trough, water pump, humidifier, fountain, aquarium, pond, chicken/dog/horse/cattle waterer, etc.
Check Stock

ZKTOOL 11PC Compression Tester, Automotive Engine Compression Tester Adapter Kit, Engine Cylinder Leak Down Compression Test Motor Pressure Gauge. (All Vehicles).

  • Function: The cylinder compression tester kit is used to quickly and accurately test the cylinder pressure of gasoline engines. Meter readings can help diagnose the following problems: stuck valve, carbon deposits, cracked cylinder head or defective main gasket, poor or worn piston ring installation, burned or damaged piston..
  • Packing: Including 10 connection adapters --- 11-in-1 engine tester gauge kit including 1 piece spring buckle gauge.
  • 5-piece brass adapter M10, M12, M14, M16, M18, widely used.
  • a 200mm metal Extension rod connector, two 50mm metal aluminum rod straight and bent rod, an extension rod hose with M12*1.25 thread..
  • Application: Gasoline engine cylinder --- equipped with different sizes of rotating and push-in adapters, widely used in most types of gasoline gasoline gas engine cylinders and deep spark plugs, common in motorcycles, lawn mowers, cars, trucks, ATV and many more. Not suitable for diesel engines..
  • Stable quality tester: Maximum 300PSI or 20BAR dual pressure device, with easy-to-read large dial, acrylic glass meter cover with scratch-resistant coating and rubber protective cover with excellent shock absorption performance. The built-in one-way valve with pressure holding function ensures that the pressure gauge obtains the ma....
Check Stock

Oil Pressure Shock Absorber, Black M14 x 20mm Stroke for Pneumatic Air Cylinder AC1420-2

  • 【SELF-PRESSURE-REGULATION】M14 air cylinder shock absorber has a soft shock absorbing effect because the self-pressure-regulation function..
  • 【REDUCE SHOCK &NOISE】Industrial shock absorber can reduce shock and noise,improve the stability in automated mechanical operations, enhance working efficiency..
  • 【RESET PISTON ROD FAST】The spring inside can reset the piston rod fast cause the perfect movement of the check valve..
  • 【HIGH QUALITY】Shell is made of high quality alloy and stainless steel, good damping, high hardness and strong heat resistance..
  • 【OIL PRESSURE SHOCK ABSORBER】Length: Approx. 12.6cm / 4.96inch, Thread: M14, Stroke: 20mm, Allowable speed: 0.8-3m/s..
Check Stock

COMP Cams 159 Engine Break-In Oil Additive, 12 oz. Bottle

  • Improves surface mating of rotating assembly, rod journals, piston rings, valve guides, cam and lifters, etc..
  • Protects all internal engine components, including flat tappet and roller valve trains.
  • Proprietary additive package includes optimum amounts of ZDDP (Zinc and Phosphorus), Molybdenum and detergents.
  • Requires no additives or supplements for maximum protection.
  • Fully compatible with gasoline, methanol and high octane race fuel.
Check Stock