Categories

Best Pitch Repair Tool

AIYOO 2 Pack Deburring External Chamfering Tool Deburring Tool for Metal High Speed Stainless Steel Bolt Deburring Tool Quickly Repairs Damaged Metal Drill Bit Triangle Shank

  • ...th high strength and hardness, durable, rust-proof, and corrosion-resistant, accompany you for a long time. And reusable, as sharp as ever, never dull..
  • Safe and efficient: High-strength, high-hardness deburring outer chamfering tools can easily scrape the outer edge of bolts, pipes, or bars to remove burrs. Quickly repair damaged bolts and tighten nuts in place without hurting hands, sparks, or burns.
  • Repair Damaged Threads: The chamfer tool can quickly repair damaged threads on steel bolts, creating a small 45° chamfer that does not alter the pitch and does not create a tip..
  • Simple operation: Attach the deburring outer chamfering tool to the end of the power drill, use the lowest speed on the drill bit, and apply light pressure to deburr. This tool simplifies the repair process, reduces repair time, and eliminates the need to replace expensive or hard-to-find hardware, making it a great addition to your industry and home..
  • Versatile: The deburring tool is suitable for applications including stainless and hardened steel, threaded rods, copper, brass, aluminum, plastic, and wood. And the copper pipe deburring tool is compact and portable, making it easy to carry the deburring and chamfering tool in a pocket or tool bag. Fits Size ....
Check Stock

Nes Universal External/Internal Thread Repair Kit NES1A 21 22 3-Piece NES1015 Orange

  • UNIVERSAL THREAD REPAIR TOOLS - one hand tool repairs inch or metric, right or left handed, coarse or fine threads.
  • QUICK SIZING - no need for a caliper or pitch gauge to determine diameter or thread count or type.
  • RAPID ADJUSTMENT - tool adjusts and quickly adapts to particular diameter and pitch of fastener thread.
  • HOW TO USE - automatically chases good threads and the cutter repairs damaged threads.
  • QUALITY CUTTER - blades are made of High Speed Steel induction hardened to 62 Rockwell (INT) and 58 Rockwell (EXT) for longevity of life.
Check Stock

Nes NES1025 Universal External/Internal Thread Repair Kit NES1A, 2, 21, 22, 23, 24, 6-Piece , Orange

  • UNIVERSAL THREAD REPAIR TOOLS - one hand tool repairs inch or metric, right or left handed, coarse or fine threads.
  • QUICK SIZING - no need for a caliper or pitch gauge to determine diameter or thread count or type.
  • RAPID ADJUSTMENT - tool adjusts and quickly adapts to particular diameter and pitch of fastener thread.
  • HOW TO USE - automatically chases good threads and the cutter repairs damaged threads.
  • QUALITY CUTTER - blades are made of High Speed Steel induction hardened to 62 Rockwell (INT) and 58 Rockwell (EXT) for longevity of life.
Check Stock

23 Pieces of Guitar Repair Kit, Guitar Tools,Installation Tool Kit, Guitar String Tool,Suitable for: Electric Guitar, Bass, Mandolin, Banjo, Ukulele, Acoustic Guitar, Etc.

  • 1. Guitar repair parts include: guitar setup kit,guitar workstation,1 x screwdriver, 1 x steel ruler, 1 x string ruler, 1 x 3 in 1 guitar string winder needle puller, 1 x nut bridge saddle groove grinding file tool, 1 x Storage bag, 2 x fingerboard guards, 1 x Guitar Fret crown file, 1 x Guitar Fret rocker leveling, 3 x hex wrench, 3 x file, 9 x stainless steel lower chord radius gauge (7.25" 9.5" 10" 12" 14" 15" 16" 17" 20")..
  • 2. Simple operation: All guitar repair kits are small and light, suitable for string replacement and setting tools, and are very suitable for maintaining and keeping the instrument in an ideal playing state. musicians tool kit can be used to maintain, fast fret string and fingerboard lubricant,clean and repair stringed instruments by changing strings, setting the pitch, adjusting actions, checking the height of the strings, etc..
  • 3. Convenient to carry: The packaging of the guitar cleaning and repairing tools is a small tool bag with a small cuboid shape, which is small and easy to carry..
  • 4. Suitable for: Acoustic and electric guitars, bass, banjo, mandolin and other stringed instruments. cruz tools,guitar multi tool,Ukulele bass banjo repair tool with carrying bag for electric guitar, hexagon wrench with ruler measurement tool ....
Check Stock

Draper James Magnolia 52 Page Non Dated Weekly Planner with Page Marker

  • The Hat Trick Divot Tool is solid metal construction for durability but remains lightweight and easy to carry. The 5-in-1 tool is a ball marker holder, repair tool, bottle opener, cigar holder and even a club rest!.
  • The Divot tool comes with a Removable Magnetic Ball Marker seated near the top of the handle.
  • High-Quality magnetic Team Golf Ball Marker - Standard Size and Interchangle with most Magnetic Marker Holders.
  • Ideal for fixing pitch marks and ball dents with ease - and makes a great Gift for any Golfer.
Check Stock

Rotary Breather Tube Set Fits B&S 692187 & 692189

  • ✅ Restore dent, dinged, or damaged threads in nuts and bolts within a minute with the RT1 Rotary Thread File! Restoring threads on the smallest bolts and getting into deep nuts without worrying about getting the right pitch is exactly what you’ll get with the RT1..
  • ✅ Unlike traditional thread repair tools that come in standard sizes, the RT1 is an all-in-one tool that eliminates the need for switching when you’re working with both external and internal threads..
  • ✅ The ingenious universal design of our thread file is what makes it stand out from other thread files. All inch, metric and pipe threads have the same 60 degree "V" angle. This allows this tool to quickly work on any project, both internal and external threads..
  • ✅ Ideal for restoring Inch, Metric, Pipe, Male, and Female Threads made out of Metals, Hardened Metals, Ceramics, Glass, and Plastics, the RT1 has become the go-to thread repair tool for both home improvement enthusiasts as well as industry professionals..
  • ✅ Our US Patended and Engineered Rotary thread file is great for home projects, industrial, automotive, farm & ranch, and technicians. Purchase with peace of mind with our 24/7 friendly customer service..
Check Stock

Irwin Hanson 9740 1\ 10mm-1.5 Hexagon Metric Die

  • ... external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt..
  • Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..
  • T Handle Tap Wrench: T Handles hold the end of a tap to provide extra leverage for hand tapping making them very useful for confined spaces or where extra reach or leverage is required. T Handle Tap wrenches may also be used with screw extractors, drills, and other tools..
  • Material: Taps and dies are used to cut metals and are typically made of high-speed steel or hardened carbon steel, with the former is much more robust and used for a broader range of material. These cutting materials are suitable for threading steel, cast steel, cast iron, non-ferrous ....
Check Stock

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

  • [Create Stronger Internal Threads]: The ABN Helicoil Rethreading Tool Kit Metric Stripped Thread Repair Kit is a course threads M5 to M12 restorer 131-piece set made of chrome-vanadium with stainless steel coils to restore damaged threads in steel, cast iron, and aluminum spark plug engine repairs, stripped oil pan drain plugs, and more.
  • [Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
  • [Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
  • Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
  • [Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
  • Includes bottom recesses for organizing the coils in included plastic bags.
  • [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
  • Load the thread insert into installation tool.
Check Stock

Hanperal 3pcs Pocket Chainsaw Chain Punch Breaker Chainsaw chain Repairing Tools Set

  • -Designed by Mini size, easy to use and carry..
  • -The package include 2 punches and a bracket for chain..
  • -Made of high quality Carbon steel,sturdy and durable to use..
  • -Works on most Chainsaw.Fit for: Breaks 1/4",'3/8''LP, .325", 3/8" and .404" pitch chain. It's a great tool to repair your chain..
Check Stock

Hi-Spec 39 Piece Metric Tap & Die Set. Complete M3 to M12 Fine & Coarse Tools to Cut, Chase and Thread with Screw Pitch Gauge in a Tray Case

  • CLEAN CUT RESULTS: Start DIY garage and workshop tapping and threading with the Hi-Spec 39 Piece Metric Tap and Die Tool Set. Whether its internal or external rethreading, cut new material, chase damaged or old screws, repair rusty nuts, bolts and spark plugs.
  • 34 PIECE METRIC SIZES: Most popularly used coarse and fine thread sizes and pitches of three and four flute tapered and plugged taps and dies. Metric Tap and Dies: 8 thread sizes from M3 to M12 with 16 pitch sizes plus NPT (1/8-27).
  • GOES THROUGH METALS: For materials such as carbon alloy steels, cast iron, aluminium, brass and bronze. Using premium GCr15 Alloy steel, a high carbon chromium bearing steel with high Rockwell hardness, contact fatigue performance, and corrosion resistance.
  • 3 TAP & DIE WRENCH HANDLES: Just fix the tap or dies tools into the steel alloy wrench handles with adjustable fittings and get turning. Includes a handy mini-screwdriver to assemble and fix the dies.
  • SCREW PITCH GAUGE: Easily and accurately measure the pitch or lead of a screw thread with the 16-Blade Screw Pitch Gauge. All tools and accessories are kept tidy and organised in a slimline case for simple storage and carry.
Check Stock

prowithlin Golf Divot Tool w/Golf Ball Marker, Zinc Alloy Exquisite Golf Gift for Dad | Divot Repair Tool(Bronze II)

  • Golf gift for men: Still being confused about what would be a nice gift for father in father’s day,birthday and Christmas? If your dad is a golfer, this divot tool with ball marker can be an one-in-a-million gift. Sure, you can also prepare it for your friend or for business..
  • Hat clip divot repair tool: It is designed with a hat clip for easily carrying. Also you can put it on front chest pocket. It’s lightweight but not means a poor quality. Instead, it is good quality and sound workmanship..
  • Strong enough magnetic performance: We have done all-around market survey before selling this ball marker. People has been complaining the weak magnet from the average ball marker in the market and easily fall off. Prowithlin is addicted to help you solve the problem..
  • Care the putting green: Why should we use a golf divot repair tool? Fixing our pitch marks on putting greens is one way that golfers help take care of the golf courses we play. We enjoy to putting golf ball on Golf course, as a gentlemen it is duty to take goof care of the putting green..
  • Considerate after sale service: Lifetime after sale service is sponsored by prowithlin. If you have any concerns kindly contact us..
Check Stock

Rotary Thread File RTK1, Chase, Restore, Repair, and Clean: Male, Female, Inch, Metric, And Pipe Threads. (3 Piece File Starter Kit)

  • Restore dent, dinged, or damaged threads in nuts and bolts within a minute with the RT1 Rotary Thread File! Restoring threads on the smallest bolts and getting into deep nuts without worrying about getting the right pitch is exactly what you’ll get with the Rotary Thread Starter Kit..
  • Unlike traditional thread repair tools that come in standard sizes, the RT1 and RT2 that comes in this kit is an all-in-one tool that eliminates the need for switching when you’re working with both external and internal threads..
  • The ingenious universal design of our thread file is what makes it stand out from other thread files. All inch, metric and pipe threads have the same 60 degree "V" angle. This allows this tool to quickly work on any project, both internal and external threads..
  • Ideal for restoring Inch, Metric, Pipe, Male, and Female Threads made out of Metals, Hardened Metals, Ceramics, Glass, and Plastics, the RTK1 Starter Kit has become the go-to thread repair tool for both home improvement enthusiasts as well as industry professionals..
  • Our US Patended and Engineered Rotary thread file is great for home projects, industrial, automotive, farm & ranch, and technicians. Purchase with peace of mind with our 24/7 friendly customer service..
Check Stock

Hi-Spec 39 Piece SAE & Metric Tap & Die Set. Complete M3 to M12 \\/ #4 to 1\\/2in Fine & Coarse Tools to Cut, Chase and Thread with Screw Pitch Gauge in a Tray Case

  • CLEAN CUT RESULTS: Start DIY garage and workshop tapping and threading with the Hi-Spec 39 Piece SAE & Metric Tap and Die Tool Set. Whether its internal or external rethreading, cut new material, chase damaged or old screws, repair rusty nuts, bolts and spark plugs.
  • 34 PIECE SAE & METRIC SIZES: Most popularly used coarse and fine thread sizes and pitches of three and four flute tapered and plugged taps and dies. SAE & Metric Tap and Dies: 16 thread sizes from M3 to M12 and #4 to 1/2in with 16 pitch sizes plus NPT (1/8-27).
  • GOES THROUGH METALS: For materials such as carbon alloy steels, cast iron, aluminium, brass and bronze. Using premium GCr15 Alloy steel, a high carbon chromium bearing steel with high Rockwell hardness, contact fatigue performance, and corrosion resistance.
  • 3 TAP & DIE WRENCH HANDLES: Just fix the tap or dies tools into the steel alloy wrench handles with adjustable fittings and get turning. Includes a handy mini-screwdriver to assemble and fix the dies.
  • SCREW PITCH GAUGE: Easily and accurately measure the pitch or lead of a screw thread with the 16-Blade Screw Pitch Gauge. All tools and accessories are kept tidy and organised in a slimline case for simple storage and carry.
Check Stock