Categories

Best Pla Filament Matte Grey

AMOLEN 3D Printer Filament, Metal PLA Filament 1.75mm with Magnetic, Contains 20% Metal Iron Powder, Apply to Polishing, Matte Black PLA 3D Printing Filament +/- 0.03mm, 1kg/2.2lbs

  • 【Metal PLA Filament with Magnetic】 -- High quality 3D Printer Filament with magnetic, special matte black texture, contain 20% Metal Iron powder. This PLA filament is multifunctional with strong magnetic. Ideal for printing all kinds of little parts, screw, screw cap, chain, they can all be attracted by magnets. The matte black finish with magnetic filament is more widely applicable..
  • 【Apply to Sanding and Polishing】-- 3D Printer Metal PLA Filament are made of high quality raw materials, high density and tough. The matte finish print will show the different polishing effect by sanding with different grits of sandpaper to get a smooth and shiny print. Good shaping, odorless, no bubble, no jamming, no warping. NOTE: Please pass the filament through the fixed hole to avoid tangles after use..
  • 【Multifunctional PLA Filament】-- This Metal Iron Black PLA filament print smoothly and easy to print, with magnetic and suitable for Sanding and Polishing, with heat resistance quality, and corrosion resistance. Extrusion temperature range: 200 - 220℃.
  • Printing Bed (Optional)0-50℃；Printing speed: 30-60mm/s..
  • 【High Compatibility】-- AMOLEN PLA Filament is Perfectly compatible with most of the FDM 3D Printer, MakerBot, LulzBot, FlashForge, UP, Pri....
Check Stock

JAYO PLA+ 3D Printer Filament Bundle, PLA Pro Filament 1.75mm, Neatly Wound Filament 2.5kg, 250g Spool, 10 Pack, Black+White+Grey+Red+Orange+Blue+Green+Yellow+Wood Color+Transparent

  • 【PLA+ Filament Bundle Multicolor】PLA Plus 3D printer filament bundle multicolor, 10 colors in total: Black+White+Grey+Red+Orange+Blue+Green+Yellow+Wood Color+Transparent. 10 rolls of multicolor 250g PLA+ Filament, individually vacuum packed, 2.5KG in total..
  • 【JAYO PLA+ 3D Filament 1.75mm】PLA PLUS filament is 10 times stronger than normal PLA Filament. PLA+ filament's better toughness, higher strength, lower warping and brighter color can make the 3D printing result better..
  • 【Neatly Wound Filament】Adopting 100% neatly line up filament skill, produced with full mechanical winding and strict manual examination. Making sure JAYO PLA+ filament neat and easy to be fed. Say goodbye to the tangling problem and unstable printing process..
  • 【1.75mm Filament Diameter】JAYO PLA Plus 3D printer filament has 1.75 mm diameter, dimensional accuracy +/- 0.02 mm, accurate diameter making it suitable for almost FDM 3D printers..
  • 【PLA+ Recommend Settings】We recommend printing the PLA+ filament at a nozzle temperature of 210-235°C, bed temperature of 55-65°C, printing speed of ....
Check Stock

ANYCUBIC Mega X FDM 3D Printer and ANYCUBIC PLA 3D Printer Filament(Grey + Black) Bundle

  • ① ANYCUBIC MEGA X 3D Printer, Large Metal FDM 3D Printer with Patented Heatbed and 1kg PLA Filament, Build Size 11.81in(L) X 11.81in(W) X 12in(H).
  • ② ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Grey.
  • ③ ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Black.
Check Stock

Creality PLA Matte Filament 1.75mm,Ender Upgrade CR Matte PLA, 2.2lbs(1kg)/Spool, Dimensional Accuracy +/- 0.03 mm,Fit Most 3D Printer,Strawberry Red

  • 【Creality Matte PLA】Creality CR matte PLA is Creality Official newly launched filaments can output prints with shine-free color and frosted texture, which make it perfect for creation needing low-key, rich and enigmatic appearance.Neat printing..
  • 【Easy Printing & More Convenient】Creality matte PLA Easy to print just like normal PLA, more likely to get quality prints with sharp details. Excellent threshold overhang angle. Raft and support are very easy to remove.
  • Larger spool inner diameter design makes feeding smoother.
  • 【Odorless & No Bubble】Creality matte PLA Developed based on PLA, this matte PLA filaments deliver excellent printing quality with no odor and low warpage during printing.
  • Dry vacuum packaging to effectively protect the filament from moisture, no stringing and bubble-free.
  • 【Dimensional Accuracy & Consistency】More reliable raw material supply chain manufacturing factory ensures that the diameter of these Creality matte PLA filaments of 1.75 mm diameter, Accuracy +/- 0.03 mm.
  • 【After Sale Worry-Free】Whenever or why, when encountering any Creality matte filament questions you can contact our shop seller, We will provide you with more satisfactory solution..
Check Stock

IEMAI Carbon Fiber PLA 3D Printer Filament, Carbon Fiber Filament 1.75mm, PLA Filament Spool 1KG, Dimensional Accuracy +/- 0.02mm Black Filament for 3D Printer

  • IEMAI CARBON FIBER PLA 3D PRINTER FILAMENT - 100% virgin material without cheap plastic fillers, Vacuumed Sealed With Desiccant. Carbon Fiber (containing 20% carbon fiber , in weight) is combined with PLA to form a strong plastic which is ideal for printing items requiring added strength, more abrasive than standard PLA..
  • PLA Filament -- Material : 80% PLA filled with 20% Carbon fiber . Weight: 1 KG (approximately 2.20 lbs) . Color: Matte Black . PLA filament is made of high-strength, high-modulus fiber material, full mechanical winding and strict manual examination, which guarantee the filaments tidy and easy to be fed. Works perfectly with most FDM 3d printers on the market, such as MK3, Ender 3, Monoprice FlashForge and etc..
  • PLA 1.75 mm - High Dimensional accuracy - 1.75 mm in diameter, Minimum demission tolerance +/- 0.02mm to ensure consistent feeding and smooth printing. Recommend Printing Temperature: 190℃-220℃/374°F-428°F( dependent on printer model). Recommended Print Speed: 50-100mm/s. Heat Bed temperature: 50 – 60°C/122°F-140°F..
  • Carbon fiber filament is a tough material with a nice matte finish. The increased strength provided by the carbon fiber particles contributes to greater dimensional stability, helping to avoid warping and....
Check Stock

HATCHBOX Matte PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, White

  • FILAMENT SPECS: SIZE: 1 kg (approximately 2.20 lbs) Spool, 1.75 mm Filament Diameter (Dimensional Accuracy +/- 0.03 mm), TEMPERATURE: Recommended Extrusion/Nozzle Temp 210°C - 230°C (410°F - 446°F).
  • SMOOTH, SHINE-FREE, and NO GLOSS PLA FILAMENT: Achieve clean and professional looking prints with our new Matte Filament! This new 3D filament produces a slick and modern look perfect for those desiring a smooth texture and soft looking matte finish. Print all your favorites and more with the same quality of standard PLA!.
  • BEGINNER & EXPERT FRIENDLY: Hatchbox 3D Filaments are made with quality and consistency in mind, making it easy for novice users to get started with basic settings. Seasoned printers can push their designs to the limit without worrying about purity, tolerance or printing issues..
  • TOP QUALITY 3D PRINTING: Clog, bubble and tangle-free! Hatchbox PLA is formulated to offer minimal warping and little to no odor without the use of a heated bed. PLA is vacuum-sealed with desiccant to prevent moisture absorption, allowing for high-detail resolution..
  • WHY HATCHBOX? We’re proud to be known in the 3D printing community for producing the highest quality PLA on the market, with the largest selection of filaments and colors at an unbeatable pr....
Check Stock

HATCHBOX Matte PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black

  • FILAMENT SPECS: SIZE: 1 kg (approximately 2.20 lbs) Spool, 1.75 mm Filament Diameter (Dimensional Accuracy +/- 0.03 mm), TEMPERATURE: Recommended Extrusion/Nozzle Temp 210°C - 230°C (410°F - 446°F).
  • SMOOTH, SHINE-FREE, and NO GLOSS PLA FILAMENT: Achieve clean and professional looking prints with our new Matte Filament! This new 3D filament produces a slick and modern look perfect for those desiring a smooth texture and soft looking matte finish. Print all your favorites and more with the same quality of standard PLA!.
  • BEGINNER & EXPERT FRIENDLY: Hatchbox 3D Filaments are made with quality and consistency in mind, making it easy for novice users to get started with basic settings. Seasoned printers can push their designs to the limit without worrying about purity, tolerance or printing issues..
  • TOP QUALITY 3D PRINTING: Clog, bubble and tangle-free! Hatchbox PLA is formulated to offer minimal warping and little to no odor without the use of a heated bed. PLA is vacuum-sealed with desiccant to prevent moisture absorption, allowing for high-detail resolution..
  • WHY HATCHBOX? We’re proud to be known in the 3D printing community for producing the highest quality PLA on the market, with the largest selection of filaments and colors at an unbeatable pr....
Check Stock

HATCHBOX Matte PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Brown

  • FILAMENT SPECS: SIZE: 1 kg (approximately 2.20 lbs) Spool, 1.75 mm Filament Diameter (Dimensional Accuracy +/- 0.03 mm), TEMPERATURE: Recommended Extrusion/Nozzle Temp 210°C - 230°C (410°F - 446°F).
  • SMOOTH, SHINE-FREE, and NO GLOSS PLA FILAMENT: Achieve clean and professional looking prints with our new Matte Filament! This new 3D filament produces a slick and modern look perfect for those desiring a smooth texture and soft looking matte finish. Print all your favorites and more with the same quality of standard PLA!.
  • BEGINNER & EXPERT FRIENDLY: Hatchbox 3D Filaments are made with quality and consistency in mind, making it easy for novice users to get started with basic settings. Seasoned printers can push their designs to the limit without worrying about purity, tolerance or printing issues..
  • TOP QUALITY 3D PRINTING: Clog, bubble and tangle-free! Hatchbox PLA is formulated to offer minimal warping and little to no odor without the use of a heated bed. PLA is vacuum-sealed with desiccant to prevent moisture absorption, allowing for high-detail resolution..
  • WHY HATCHBOX? We’re proud to be known in the 3D printing community for producing the highest quality PLA on the market, with the largest selection of filaments and colors at an unbeatable pr....
Check Stock

CooBeen PLA 3D Printer Filament 1.75 PLA Marble Filament Dimensional Accuracy +/- 0.02 mm 1 kg Spool 2.2Ibs 1.75mm PLA Marble

  • 【Stone Texture of Marble PLA Filament】 : CooBeen's matte Marble PLA Filament has the cool stone finish and a real marble-speckled texture, High....
  • 【Reliable Spool】: Marble PLA has leading core technology to stabilize its size of 1.75mm and ensure that each spool is extended to (330m) length.....
  • 【Easy to Print & Reduce Fault】: This Filament is as easy to print as PLA. Vacuum Seal and the new batch reduce Filament brittle. Additional Nozzle....
  • 【Finer Stone Texture Print】 : Marble filament is a natural, light-colored stone texture material suitable for printing all items of stone....
  • 【What You Get】: Vacuum-Sealed Marble PLA 3D Printer Filament, Build Surface(7.88’’ × 7.88’’), 0.4 Brass Nozzle, Cleaning Needle, Product....
Check Stock

SainSmart Light Weight Filament 1.75mm, LW-PLA Low-Density Active Foaming 3D Printer Filament for RC Planes Drone Parts and Cosplay, White PLA Filament, 1KG

  • [Reduced Weight]: Designed with active foaming technology, the SainSmart LW PLA Filament density of 0.54g/cm³ compared to 1.2 g/cm³ for regular PLA, means a huge weight reduction to your printed parts, perfect for stuff like RC planes and drones. The reduced weight enables lower wing loads and stall speed, allowing for overall better performance..
  • [2X 3D Prints with One Spool]: The foaming expansion of this LW PLA filament makes it possible for you to print at up to 2X Material flow so that you can print more with less material. One LW PLA roll equals up to 2.2 ordinary PLA rolls..
  • [Unlimited Customization]: The LW PLA filament will start expanding with certain printing temperatures above 210 ℃. By adjusting the printing temperature, speed, and flow during your print, you can customize the expansion effect by using different temperatures and speeds in a section on a model for varied density..
  • [Smooth Finish & Paint Friendly]: Models printed with this LW PLA filament has a smooth matte surface with minimum layer lines. The improved paint adhesion also sets no limit on your creativity..
  • [Perfect Materials for RC Planes]: The expanding property of this PLA Filament allows for excellent layer bonding, better drop resistance and repairability. In combinat....
Check Stock

AMOLEN Wood Filament Bundle,Walnut,Bamboo Wood,Red Wood,Black Wood,3D Printer Filament,PLA Filament 1.75mm,200g/Spool

  • 4 WOOD PLA FILAMENT BUNDLE - 4 different wood PLA filament with Walnut wood, Red wood, Bamboo and Ebony wood, each filament spool is 200g..
  • REAL WOOD/BAMBOO FIBER - There is 20% wood fiber in the walnut wood, red wood and ebony wood PLA Filament. The light color wood has 20% bamboo fiber. Therefore, you will get a print like a real wood with matte face and even wood smell..
  • REFUSE TO CLOGGING - The finely ground wood particles, double filtration, no impurities, make your printing smoother. Good shaping, no bubble, no jamming, no warping, no brittle..
  • HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm..
  • VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage..
  • ONE MONTH WARRANTY - Any problems, please contact us for free replacement or full refund. AMOLEN is committed to devolop high-quality and special filament..
  • Print Speed: 30-60mm/s, 40mm/s will be better.
Check Stock

Silk PLA Pro Silk Copper PLA Filament 1.75mm 1KG 3D Printer Filament 3D Printing Materials Silky Metallic Metal Copper PLA Plus CC3D Silk Filament

  • This ia an upgrade version of Silk PLA filament series from CC3D..
  • The surface of the Silk Pro PLA filaments itself looks matte, but the printed products have the same shiny metallic luster as Silk PLA..
  • The advantage of Silk Pro PLA filament is that you can print more exquisite products..
  • Reduces the difficulty of 3D printing with bowden drive extruder..
Check Stock

PLA Max PLA+ Turquoise PLA Filament 1.75 mm 3D Printer Filament 1KG 2.2LBS 3D Printing Material Strength Than Normal PLA Pro Plus Filament CC3D Turquoise Color

  • New Arrival:PLA MAX Filament is made of high-quality materials and by special technology..
  • Have higher strength and better toughness,excellent thermal stability than ordinary PLA..
  • PLA MAX is an upgraded version of PLA Pro filament..
  • Industrial & Scientific Additive Manufacturing Products 3D Printing Supplies 3D Printing Filament.
  • Now available in white,black,grey,red,orange,yellow,green,blue,purple..
Check Stock