Categories

Best Planetary Gearbox Stepper Motor

Worm Gear Nema23 Stepper Motor 3.5A L2.1inch Gearbox Ratio 30:1 Speed Reducer for CNC DIY Router

  • 2 phase stepper motor 2.1inch long, 1.3Nm.
  • Speed reducer motor output speed 0--20 R/min.
  • Applied to CNC Router, Engraving, Milling, Lathe. Fast Delivered 4-6 days after shipping..
Check Stock

Rotational 4th Axis A axis Rotary table Fourth axis 3 Jaw Chuck Gapless harmonic reducer gearbox stepper motor K11-100mm dividing head with 65mm Tailstock for CNC Router Engraving Milling Machine

  • Chuck Type:Gearbox K11-100mm 3 Jaw Chuck.
  • Zero Backlash with Gapless harmonic gearbox reducer.
  • Stepper motor: Nema23 2-phase 57 stepper motor.
  • Reducing ratio:50:1 (only have 50:1 type).
  • Accessories: Set of Anti-claw and wrenches.
Check Stock

Stepper peristaltic Pump 24V high Flow Kamoer KPHM400 lab Liquid dosing Pump 400ml/min Variable Speed

  • KPHM series peristaltic pump, the new design makes the pump tube is well fixed and prevents the pump tube from moving during operation. It is also a low-cost large flow peristaltic pump with stepper motor..
  • Motor: Stepper motor,Voltage: 24V,Current: 0.3A,Flow rate: 400ml/min，Speed: 400rpm，Net weight: 304g,Roller: 3 rotors,Working Temperature: 0-40℃,Humidity: ＜80%,Pump head material: Nylon.
  • Pump tube material:PharMed BPT.Very good resistance to general chemicals, as well as excellent resistance to acids, alkalis and oxides..
  • No pollution,low pulsation.The gearbox drives the pump tube to work, and the pump tube is not easy to slip.The liquid only touches the pump tube, not the pump body..
  • Application:Experimental Research，Experimental Monitoring，Inkjet.Printing，Aquarium，Smart Home，Aviation Operation.
Check Stock

STEGODON New 4500 lb. Load Capacity Electric Winch,12V Steel Cable Winch with Wireless Handheld Remote and Wired Handle, IP67 Waterproof Electric Winch with 4-Way Roller Fairlead

  • ...ew solenoid truly achieves the principle of heat insulation, durability, high stability, avoid the problem of capstan damage or motor burning caused by insufficient solenoid power.The new clutch system strengthens the connection between the clutch and the gear, it is not easy to cause damage to the clutch..
  • [THE NEW PLANETARY]The new 3-stage Planetary was of high strength, more solid, cold extrusion integrated structure, and did not deform or crack under large torsion.And realized the differential speed, deceleration (growth rate), reversal and other functions.Combined use of multiple planetary gear trains can achieve maximum speed ratio and small volume, and can realize coaxial deceleration (increase rate)..
  • [Warranty]All winches come backed by a lifetime technical support and one-year limited warranty.If there is any problem during the purchase peri....
Check Stock

Planetary Gearbox Reducer Stepper Speed Reducer High Torque for Nema34 Stepper Motor Ratio 4:1

  • Planetary Reducer for NEMA34 (Flange=86mm) Stepper Motor.
  • Advantages Longevity, high precision, low noise.
Check Stock

Planetary Gearbox Nema 23 Ratio 10:1 Gear Head Speed Reducer 1/4\ Input fit for 6.35mm Shaft Stepper Motor CNC Router Lathe DIY(10:1)

  • ★Input shaft hole is 1/4" that can match the 6.35mm shaft motor (without key). The output shaft diameter is 14mm.
  • ★The gear head has Nema 23 Input & output flange,suitable for flange 57mm stepper motor and other motors which can completely match the installation size ..
  • ★Rated speed is 3000RPM, 10:1 gear ratio ,the rated holding torque is 15N.m and the Max. holding torque is 25N.m.
  • ★4pcs screws provide for installation , small size gearbox , very convenient for the machine which has limited space for a gearbox..
  • ★Widely used on kinds of machine , lathe ,engraving machine etc..
Check Stock

Enerpac PTW3000C Pneumatic Torque Wrench, 900' to 3000 lb.

  • High speed continuous rotation for constant torque output.
  • Low friction planetary gearbox design minimizes wear and extends uptime.
  • Ergonomic, low vibration design reduces fatigue and the risk of vibration related injuries for the operator.
  • Low noise air motor provides quiet, consistent performance for indoor and outdoor applications.
  • Unique calibration certificate provided with each tool.
Check Stock

60:1 Worm Gear Speed Reducer Reduction Gearbox Ratio Gear Box

  • Input Bore Size: 11mm Input Flange Model: NEMA23.
  • Output Bore Size: 14mm Application: Matched with Servo/Stepper Motor.
Check Stock

RUGCEL WINCH 12000lb Tank Waterproof Electric Synthetic Rope Winch 12V with Hawse Fairlead, Wired Handle and 2 Wireless Remote,Black Rope，for Truck SUV

  • ...the winch well.The new design is more conducive to the heat dissipation of the gearbox to ensure the long operation of the winch..
  • [SPECIAL DESIGNED]Special designed for atv, utv, car, boat, trucks, jeeps, modified vehicles and multi purpose utility trailers.
  • [STRONG POWER]7.0hp 12v series wound motor and three-stage planetary gear system with free spooling clutch.82' Length 2/5" Diameter Nlyon rope.
  • [NEW CONTROL SYSTEM]The new control system will definitely surprise you. The 2-in-1 remote combines wired remote control and wireless remote control power system. The signal control range of the remote controller can reach up to 100ft. Both wired and wireless control have been integrated intio this multifunctional controller with a built-in magnet..
  • [POWERFUL PLANETARY GEAR]The real three sets of 3-Stage Planetary enables differential, deceleration (qrowth), reversal, and more. The combined use of multiple groups of planetary wheel systems can achieve a very large speed ratio,which can achieve coaxial deceleration (growth)..
Check Stock

115/230VAC Pulling Electric Winch with 11.0 fpm and 2000 lb. 1st Layer Load Capacity

  • All brass (no corrosion) series wound that is double sealed.
  • Sealed waterproof 600 amp contactors and steel contactor cover for added protection.
  • Double sealed drum (gearbox/motor) and sealed 3 stage planetary gears as well as aluminum fairleads and integrated wireless remote.
  • Fully sealed to Ip68 standard and tie bars reinforced with steel body.
Check Stock

STEGODON 4500 lb Electric Winch,ATV/UTV Winch with Synthetic Rope,12V Electric Boat Trailer Winch Kit with Wireless Remotes and Mounting Bracket

  • ...ew solenoid truly achieves the principle of heat insulation, durability, high stability, avoid the problem of capstan damage or motor burning caused by insufficient solenoid power.The new clutch system strengthens the connection between the clutch and the gear, it is not easy to cause damage to the clutch..
  • [THE NEW PLANETARY]The new 3-stage Planetary was of high strength, more solid, cold extrusion integrated structure, and did not deform or crack under large torsion.And realized the differential speed, deceleration (growth rate), reversal and other functions.Combined use of multiple planetary gear trains can achieve maximum speed ratio and small volume, and can realize coaxial deceleration (increase rate)..
  • [THE NEW CONTROL SYSTEM]The new wireless remote control enlarges the range of the signal transmitted.The transmission range is up to 325ft without obstacles.The wireless remote's reception range is twice as good as the old version.Above all,when you are using it at the same frequency as other people, signal interference will not prevent it from working..
  • [Warranty]All winches come backed by a lifetime technical support and one-year limited warranty.If there is any problem during the purchase period, please contact us at any time, and we will provid....
Check Stock

18/4 AWG Shielded CNC Wire (50FT) — Flexible Stranded Shielded 18-Gauge 4-Conductor Cable for Stepper Motors, CNC Machines, NEMA Motors, VFD Spindles, CNC Routers, 3D Printers and more!

  • RESILIENT & FLEXIBLE: Stepper motor cable designed to bend smoothly in your CNC or 3D printer chain!.
  • SHIELDED 4 CONDUCTOR WIRE: Reduce interference for your CNC spindle motor or stepper motor driver!.
  • BEST RESULTS: Shielded wire means higher quality for your 3D Printer, CNC Machine or CNC Controller..
  • GREAT FOR All STEPPER MOTORS: Nema 17 Stepper Motor, Nema 23 Stepper Motor, Stepper Driver, & more!.
  • STEPPER MOTOR WIRE: The perfect upgrade to any CNC Kit, CNC Router Kit, or CNC Stepper Motor Kit..
Check Stock

STEGODON Winch 13000 lb Electric Winch Kit Synthetic Rope,12V Waterproof Electric Winch with Wireless Handheld Remote and Corded Control,for Truck SUV

  • ...ew solenoid truly achieves the principle of heat insulation, durability, high stability, avoid the problem of capstan damage or motor burning caused by insufficient solenoid power.The new clutch system strengthens the connection between the clutch and the gear, it is not easy to cause damage to the clutch..
  • [THE NEW PLANETARY]The new 3-stage Planetary was of high strength, more solid, cold extrusion integrated structure, and did not deform or crack under large torsion.And realized the differential speed, deceleration (growth rate), reversal and other functions.Combined use of multiple planetary gear trains can achieve maximum speed ratio and small volume, and can realize coaxial deceleration (increase rate)..
  • [THE NEW CONTROL SYSTEM]Powerful wireless remote control is also configured to our 13000lb. Winch.The new wireless remote control enlarges the range of the signal transmitted.The transmission range is up to 325ft without obstacles.The wireless remote's reception range is twice as good as the old version.Above all,when you are using it at the same frequency as other people, signal interference will not prevent it from working..
  • [Warranty]All winches come backed by a lifetime technical support and one-year limited warranty.If there is any problem dur....
Check Stock