Categories

Best Plasma Cutter Non Touch Bestarc

WeldingStop 770496 Electrode and Tip Kit for Hobart AirForce 250ci 500i HP-25 HP-50 Plasma Torch 4-Pack

  • These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
  • Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
  • Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
  • The hobart 770496 plasma cutter parts kit including 2pcs electrodes and 2pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
  • Every package including 4pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
  • All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.
Check Stock

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check Stock

Plasma Cutter, 50Amp Dual Voltage 110V/220V Plasma Cutting Machine, Inverter Metal Plasma Cutting Equipment, Maximum Cutting Thickness 5/9\(14mm)

  • 【Plasma Cutter】The CUT-50 cuts rusted, rough or painted surfaces effectively and produces very little dross during the cutting process. CUT-50 plasma cutting machine has better cutting quality and longer wearing parts life..
  • 【Excellent Performance】20-50 A output, 2/5" (10mm) ideal clean cuts and 4/7" (14mm) maximum cut thickness under 220V.
  • 10-35 A output, 1/3" (8mm) ideal clean cuts and a maximum cut thickness of 2/5" (10mm) under 110V. This plasma cutter suitable for cutting alloy steel, stainless steel, copper, aluminum and other metals..
  • 【Dual Voltage Input】This plasma cutting machine supports 110V / 220V switching input power supply. 110V, 50/60Hz @ 35 A input.
  • 220V, 50/60Hz @ 28 A input. The product comes with a power conversion plug, which can be plug and play in different environments..
  • 【Safe & Portable】The plasma cutter is small in size, light in weight, and comes with a handle for easy portability. Plasma cutter with built-in over-heat protection, over-voltage protection, strong heat dissipation, good insulation.Adopt air pressure adjustment device，use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and other metals..
  • 【Package Includes】PT-31 Plasma Torch, Hose, Ground Clip, Power Adapt....
Check Stock

WeldingStop 40pcs SL60 Electrode 9-8215 Tips 9-8211 Nozzle 80A for Thermal Dynamics SL60 SL100 Torch CutMaster 52 82 152 102 Plasma Cutter Consumables

  • ✓CutMaster Cutter—— The plasma cutter spare parts kit are fitting in Thermal Dynamics CutMaster 52 / 82 Plasma Cutter SL60 Plasma Cutting.
  • The plasma consumables also can fit Thermal Dynamics CutMaster 102 / 152 Plasma Cutter with SL100 Plasma Torch.
  • ✓For Use With Torch—— These electrodes and tips are fitting in plasma Torches 2CZF1 and 2CZF2.
  • ✓Package Including—— 20pcs SL60 electrodes 9-8215 and 20pcs SL60 standoff tips 9-8211 80A Nozzle WS OEMed.
  • ✓Plasma Cutting Current—— These plasma consumables can be uesd within 80A plasma cutting.
  • ✓Replacement Parts—— These electrodes and tips are replacement parts that made by WeldingStop, and not original.
Check Stock

Dyllica 9-8213 Plasma Start Cartridge 9-8277 for Thermal Dynamics CutMaster 52 Consumables SL60 SL100 Plasma Part Consumables 1pc

  • 【Dyllica Brand Plasma Start Cartridge】The plasma Start Cartridge 9-8277 is made by Dyllica Brand.
  • It can be used as plasma aftermarket parts which can install on DYThermal Dynamics SL60 SL100 plasma torch.
  • 【Plasma Consumables Type & Ref Number】Plasma Start Cartridge, item ref number is 9-8213 / 9-8277.
  • 【As SL60 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge can install on DYThermal Dynamics SL60 torch with Cutmaster 38 / 52 / 12 / 20 /25 plasma cutter machine.
  • 【As SL100 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal Dynamics SL100 torch with Cutmaster 102 / 152 / 40 plasma cutter machine.
  • 【As SL60QL Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal DynamicsSL60QL torch with Cutmaster 58 / 60i plasma cutter machine.
Check Stock

FLARING Plasma Cutter Equipment 50 AMP 220V IGBT 1/2'' Clean Cut CUT50 Max 3/5‘’ Cut High Frequency Inverter Plasma Cutting Machine for Car Frame,Carbon Steel,Stainless Steel,Thin Copper,Aluminum

  • [Cutting Ability] This plasma cutter machine automatic 220v(50/60hz),10-50A dc output, 1/2″(12mm) ideal clean cut and 3/5″(15mm) maximum severance cut under 220v,70% duty cycle. The upgraded model only supports 220v voltage input..
  • [Cutting Material] Compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper,cast iron,chrome and aluminum(Aluminum≤1/4″,Copper≤1/5″).
  • [Breaker Recommendation] We suggest a 30A breaker on 220V while using this plasma cutter.Air Pressure 60-70PSI suggested.Btw,this CUT50 plasma cutting machine works well with a generator above 5000W..
  • [Fan-Runs-on-Demand cooling system]The new machine uses powerful cooling system, “dormant” fan,only operates when needed. This cuts down on fan noise, along with reducing power consumption and contaminants drawn into the machine..
  • [Warranty Assurance] We are a manufactory with over 10 years’ experience of professionals producing the plasma cutter machines,3 year’s warranty.Please add to cart and take it without hesitation.
Check Stock

Pilot Arc Plasma Cutter 50A Dual Voltage 110/220V Non-Touch Plasma Cutter Cutting Machine Air Inverter DC 1/2 Inch 12mm Clean Cut With Upgrade P80 Cutting Torch Plasma Cutting Equipment

  • Pilot Arc Non-touch Plasma Cutter Machine: The pilot arc cutting machine can effectively cut through rough, painted, and rusted surfaces and produce the least slag. The pilot arc technology allows you to cut without touching the metal. So it provides a better cutting quality and longer life for consumables..
  • Upgrade IGBT Technology: IGBT transistor produces a uniform output to enable cutting of thin metal and can reach high power output for cutting thick metal. At the same time, it can effectively save energy and improve the life of the machine..
  • 50Amp Dual Voltage 110/220V Machine: Output Current [email protected].
  • [email protected] and effective cutting thickness: 1/2 Inch (12mm).
  • Automatic Dual Voltage / Dual Frequency (110/220V 50/60Hz).
  • Dimensions: 15.7" X 10.2" X 13.4" (40*26*34 CM).
  • Wide Application: The plasma cutter CUT50P suitable for cut aluminum, stainless steel, alloy steel, mild steel, copper aluminum, and other metal materials. Designed for both demanding industrial and construction work, or home and hobby use..
Check Stock

Dynaloop Plasma Cutter 50Amps, Dual Voltage 110V 220V Plasma Cutter Machine, 8-10mm Cutting Thickness,16Pcs Plasma Cutting Equipment (DC500D 110V220V)

  • 【Inverter plasma cutter】： DC500D has the function of Inverter technology high frequency arc initiation（50/60HZ）. This plasma cutter needs to touch the workpiece to arc, we suggest pilot arc function If you don't like to touch metal to arc..
  • 【Automatic voltage detection】：Plasma cutting machine can adapt to dual-voltage, whether access 110V or 220V circuit can be automatically identified, and displayed on the front panel, no manual adjustment..
  • 【Air Filter Pressure Regulator Combo】：Plasma cutting machines cut materials by compressing gas(Oxygen,air, inert and others depending on material being cut ), Air regulator inside the machine can lower or maintain air pressure and filter moisture and fine particles from the air to reach effective cutting..
  • 【Cutting Thickness】The plasma cutting machine can cut different thicknesses under different voltages. ✨110V: 35A, 30-50PSI (Quality cutting thickness is 6mm#60PSI(0.6Mpa).
  • Max cutting thickness is 10mm#60PSI( 0.6Mpa)).
  • ✨220V: 50A, 30-70PSI(Quality cutting thickness is 10mm#65PSI(0.65Mpa), Max cutting thickness 14mm#65PSI(0.6Mpa))..
  • 【Portable & Multi-purpose】20lb cutting machine can be carried anywhere to cut workpiece, suitable for cutting stainless steel, alloy steel, low ca....
Check Stock

Mophorn TIG/MMA Plasma Cutter CUT520 3 in 1 Combo Welding Machine Tig Welder 200A Arc Welder 200A Plasma Cutter 50A Non-Touch Pilot Arc Plasma Cutting Machine Dual Voltage 110 220V

  • Non Touch Pilot Arc: The non-contact guide arc allows you to cut without touching the metal, ensuring better cutting quality and longer component....
  • Suitable Cutting Thickness: Effectively cut rough, painted and rusty surfaces, and produce the least slag. The maximum ideal cutting thickness: 6 mm.
  • Distinct Panel & 3 In 1: The plasma cutter has CUT MMA TIG mode. The welding machine has knobs to support different current adjustment needs. The LCD....
  • Safety & Overheat Protection: The inverter plasma cutter has a built-in protection device, and the engine will automatically shut down when overheated....
  • Compact and Portable: Lightweight 37 pounds, with a comfortable handle, easy to install and store. Ideal for outdoor repairs, rusty metal, farm and....
Check Stock

Mophorn TIG/MMA Plasma Cutter CT312P 3 in 1 Combo Welding Machine Tig Welder 120A Arc Welder 120A Plasma Cutter 30A Non-Touch Pilot Arc Plasma Cutting Machine Dual Voltage 110 220V

  • Non Touch Pilot Arc: The non-contact guide arc allows you to cut without touching the metal, ensuring better cutting quality and longer component....
  • Suitable Cutting Thickness: Effectively cut rough, painted and rusty surfaces, and produce the least slag. The maximum ideal cutting thickness: 4 mm.
  • Distinct Panel & 3 In 1: The plasma cutter has CUT MMA TIG mode. The welding machine has knobs to support different current adjustment needs. The LCD....
  • Safety & Overheat Protection: The inverter plasma cutter has a built-in protection device, and the engine will automatically shut down when overheated....
  • Compact and Portable: Lightweight 32 pounds, with a comfortable handle, easy to install and store. Ideal for outdoor repairs, rusty metal, farm and....
Check Stock

WeldingStop Standoff Guide 9-8281 for Thermal Dynamic Cutmaster 38/52/82/102/152 Plasma Cutter SL60 SL100 Torch Consumables

  • The Standoff Guide 9-8281 used for Drag cutting.
  • the Standoff Guide 9-8281 need work with shield cap 9-8218.
  • The Plasma Standoff Guide can fit CutMaster 38 / 52 / 82 plasma cutter which work with SL60 plasma torch.
  • can fit CutMaster 58 / 60i plasma cutter which work with SL60QD plasma torch.
  • The Standoff Guide can fit CutMaster 102 / 152 plasma cutter which work with SL100 plasma torch.
  • The standoff guide are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

WS SL60 SL100 Torch Start Cartridge 9-8213 9-8277 for Thermal Dynamics Cutmaster 38/52/82/102/152 Plasma Cutter Torch Consumables

  • Plasma consumable type : Start Cartridge.
  • The Start Cartridge Reference code : 9-8213 / 9-8277.
  • The Start Cartridge can fit CutMaster 38 / 52 / 82 plasma cutter which work with SL60 plasma torch.
  • can fit CutMaster 58 / 60i plasma cutter which work with SL60QD plasma torch.
  • The Start Cartridge can fit CutMaster 102 / 152 plasma cutter which work with SL100 plasma torch.
  • This 9-8213 Start Cartridge are replacement parts which produced according to the standard size , and not original.
Check Stock

WeldingStop Shield Cap 9-8218 for Thermal Dynamic Cutmaster 52/82/102/152 SL60 SL100 Plasma Cutter Torch Consumables PK-1[Black 9-8218 Level Up]

  • The Shield Cap 9-8218 used for Drag cutting.
  • the Standoff Guide 9-8218 need work with Standoff Guide 9-8281.
  • The Shield Cap can fit CutMaster 38 / 52 / 82 plasma cutter which work with SL60 plasma torch.
  • can fit CutMaster 58 / 60i plasma cutter which work with SL60QD plasma torch.
  • The Plasma Shield Cap can fit CutMaster 102 / 152 plasma cutter which work with SL100 plasma torch.
  • This 9-8218 Shield Cap are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock