Categories

Best Plasma Cutting Torch Accessory

Pack-42 WS OEMed KP2062-3B1 Nozzle Tip KP2063-1B1 Electrode KP2065-1 Drag Cup Fit Lincoln PRO-Cut Plasma Cutting Torch

  • The package will include 20pcs of Electrode, 20pcs of Tip and 2pcs of Drag Shield Cap.
  • There are 42 pieces plasma cutting torch consumables in the package, Electrode (KP2063-1B1), Tip/Nozzle(KP2062-3B1) and Drag Shield Cup(KP2065-1).
  • The electrodes, tips and other consumables are fitting in Lincoln PRO-CUT 55/80 plasma cutting torch, not PRO-CUT 25 Plasma Cutting Torch, or PCT20/80 Plasma Cutting Torch.
  • The diameter or this KP2062-3B1 Tip or Nozzle is 1.3mm or 0.053'', it also lack vortex / swirl device.
  • All the plasma cutter torch consumables are aftermarket kits and replacement parts, NOT Brand or Original.
Check Stock

WeldingStop Plasma Consumables Fit Miller Spectrum 3080 Cutter ICE-80CX Torch 212724 Electrode 212726 Tip Drag Shield 212730 PKG/25

  • The electrodes and tips in the list can be used on Miller Spectrum 3080 Plasma Cutter ICE-80CX Torch (Torch Ref. Number: 216300, 218044).
  • This list contains 10 x 212724 Plasma Electrode.
  • And 10 x 212726 Plasma Tip / Nozzle + 5 x 212730 Plasma Drag Shield Cup.
  • The Nozzles or tips plasma cutting current need under 80A.
  • All the plasma cutting torch consumables for ICE-80CX torch are Replacement Parts, NOT Miller Original Kits.
Check Stock

PT-60 Torch Electrode Contact Tip Retaining Cap Drag Shield Cap Plasma Cutting Consumables 21pcs

  • 21pcs Plasma cutting consumables kits: 5pcs electrode + 10pcs nozzle / tip + 1pc retaining cap + 5pc shield cap.
  • The plasma arc cutting consumables kits fit PT-60 / PT60 / PT-40 plasma cutting torch ,fit LTP5500 Plasma Cutter Consumables.
  • WS OEMed Plasma Arc Cutting Torch Consumables, not originalPlasma tip / nozzle diameter: 0.9mm / 0.035in,cutting current :30-40A.
  • Plasma tip / nozzle diameter: 0.9mm / 0.035in,cutting current :30-40A.
Check Stock

Plasma 600 Cutting Torch Electrode 120573 Tip 120826 Nozzle Drag Shield 120828 Replacement Parts 12pcs

  • These plasma cutting electrodes & Tips can fit in PMX 600 Cutter Torch, Hand Cutting Drag Shield Process.
  • List contains 5 x 120573 Electrode and 5 x 120826 Tip / Nozzle and 2 x 120828 Drag Shield Cap.
  • The code just for reference, this NOT means that the plasma kits are original parts.
  • The plasma consumables are replacements, NOT original!!!.
  • You will get 12pcs of plasma kits for 600 series torch consumables, for hand held plasma torch.
Check Stock

Lotos CP243 Extended Plasma Cutting Torch for RED Color LTP5000D with 3-Prong Switch Connector 24 ft

  • 24Ft long pilot arc plasma cutting torch plasma cutting torch for RED Color LTP5000D.
  • NOT Compatible with BROWN Color LTP5000D.
  • One set of consumables is installed (1 nozzle, 1 electrode, 1Cup).
  • The compatible consumables for this torch are Loots PCON 20, PCON40, PCON90..
  • Can only be used for LOTOS pilot arc plasma cutter LTP5000D.
Check Stock

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check Stock

Drag Shield Hand 60485 Retaining Cup 60389C fit Plasma Cutting IPT-60 PT-60 Torch 6-PKG

  • These plasma cutting torch consumables can use on IPT-60, IPTM-60, PT-60, PTM-60 Series plasma cutting torch.
  • Package including 1pc Retaining Cup + 5pcs Drag Shield.
  • There are 6pcs plasma cutter IPT60 consumables in every package.
  • The plasma cutting current is about 30-60A.
  • They are WS replacement parts, NOT Original plasma consumables kits.
Check Stock

WeldingStop PT-60 IPT-60 Retaining Cap 60389C Drag Shield 60485 Electrode Plasma Contact Cutting Consumables PKG/46

  • These plasma cutting torch consumables can use on IPT-60, IPTM-60, PT-60, PTM-60 Series plasma cutting torch.
  • Package including 20pcs Electrodes + Tips and 1pc Retaining Cup + 5pcs Drag Shield.
  • There are 46pcs plasma cutter IPT60 consumables in every package.
  • The diameter of tips are 0.9mm or 0.035 inches, plasma cutting current is about 30-40A.
  • They are WS replacement parts, NOT Original plasma consumables kits.
Check Stock

WeldingStop 40pcs SL60 Electrode 9-8215 Tips 9-8211 Nozzle 80A for Thermal Dynamics SL60 SL100 Torch CutMaster 52 82 152 102 Plasma Cutter Consumables

  • ✓CutMaster Cutter—— The plasma cutter spare parts kit are fitting in Thermal Dynamics CutMaster 52 / 82 Plasma Cutter SL60 Plasma Cutting.
  • The plasma consumables also can fit Thermal Dynamics CutMaster 102 / 152 Plasma Cutter with SL100 Plasma Torch.
  • ✓For Use With Torch—— These electrodes and tips are fitting in plasma Torches 2CZF1 and 2CZF2.
  • ✓Package Including—— 20pcs SL60 electrodes 9-8215 and 20pcs SL60 standoff tips 9-8211 80A Nozzle WS OEMed.
  • ✓Plasma Cutting Current—— These plasma consumables can be uesd within 80A plasma cutting.
  • ✓Replacement Parts—— These electrodes and tips are replacement parts that made by WeldingStop, and not original.
Check Stock

Reboot Plasma Cutter 45 Amp IGBT Inverter RBC4500 AC 220V Air Plasma Cutting 1/2 Clean Cut 15MM Max Cutting High-Frequency Duty Cycle for Aluminum Stainless Mild Steel Copper Iron

  • [Cutting Thickness] Plasma Cutter 20-45A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V,air pressure 60PSI....
  • [Blowing Back] Plasma cutting Torch Pre-made 3 seconds of blowing time after you release the torch,to cool down the torch head and....
  • [Generator Supported] this plasma cutter 45amp works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V.
  • [Wildely Application and Low Cost] this plasma cutter available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • [Warranty] buy this plasma cutter with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local....
Check Stock

ICE-60T/TM Plasma Torch Electrode Tip 212724 219676 Drag Shield 212730 for Miller Spectrum 875 Cutter 35pcs

  • 35pcs Plasma cutting consumables kit equivalent to Miller Spectrum 875 cutter ICE-60T ICE-60TM plasma cuttin torch.
  • Plasma electrode x 10pcs, reference code 212724.
  • Plasma tip / nozzle x 20pcs, reference code 219676.
  • Plasma drag shield x 5pcs, reference code 212730.
  • This is plasma cutting torch aftermarket replacement item which manufactured by WS,not original.
Check Stock

Plasma Torch Electrode Tip Drag Shield for Miller Spectrum 875 Cutter ICE-60T/TM 25pcs

  • 25pcs ICE-60T plasma torch consumables can fit Miller Spectrum 875 plasma cutter machine.
  • CAN NOT fit Spectrum 875 plasma cutter XT60 torch.
  • Plasma electrode x 10pcs, reference code 212724.
  • Plasma tip / nozzle x 10pcs, reference code 219676.
  • Plasma drag shield x 5pcs, reference code 212730.
  • This is ICE-60T plasma cutting torch aftermarket replacement item which manufactured by WS,not original.
Check Stock

WeldingStop 0.9mm Contact Tip IPT-60 PT-60 electrode drag shield retaining cup 30-40A plasma cutting nozzle 23pcs

  • These plasma cutting torch consumables can use on IPT-60, IPTM-60, PT-60, PTM-60 Series plasma cutting torch.
  • Package including 10pcs Electrodes + Tips and 1pc Retaining Cup + 2pcs Drag Shield.
  • There are 23pcs plasma cutter IPT60 consumables in every package.
  • The diameter of tips are 0.9mm or 0.035 inches, plasma cutting current is about 30-40A.
  • They are WS replacement parts, NOT Original plasma consumables kits.
Check Stock