Categories

Best Plasma Duct Machine

Plasma Torch Electrode Tip Drag Shield for Miller Spectrum 875 Cutter ICE-60T/TM 25pcs

  • 25pcs ICE-60T plasma torch consumables can fit Miller Spectrum 875 plasma cutter machine.
  • CAN NOT fit Spectrum 875 plasma cutter XT60 torch.
  • Plasma electrode x 10pcs, reference code 212724.
  • Plasma tip / nozzle x 10pcs, reference code 219676.
  • Plasma drag shield x 5pcs, reference code 212730.
  • This is ICE-60T plasma cutting torch aftermarket replacement item which manufactured by WS,not original.
Check Stock

NAISIT Foldable Salon Plasma Hair Dryer Level 100,000 Rotating Speed,Fast Drying in 2 Minutes,Constant Temperature Hair Care,Automatic Cleaning,Travel Blow Dryer

  • 【INNOVATIVE TECHNOLOGY ! !】 - Plasma anti-static technology, compared with traditional hair dryers and negative ion hair dryers, can reduce frizz....
  • 【AIR DUCT DESIGN PATENT】 - Unique air duct structure design, which makes the wind more concentrated and powerful while greatly reducing the....
  • 【SUPER MOTOR】 - The hair dryer motor rotates at 100,000 revolutions per minute (traditional hair dryers are only 2000-12000), emit 11-12 liters of....
  • 【CONSTANT TEMPERATURE HAIR CARE】 - Automatic detection and adjustment of the working temperature, to avoid evaporation of water caused by high....
  • 【AUTOMATIC CLEANING】 - Once the hair dryer is on, long press the temperature/airflow reduction button,the motor will be started to reverse and....
Check Stock

FLARING Plasma Cutter Equipment 50 AMP 220V IGBT 1/2'' Clean Cut CUT50 Max 3/5‘’ Cut High Frequency Inverter Plasma Cutting Machine for Car Frame,Carbon Steel,Stainless Steel,Thin Copper,Aluminum

  • [Cutting Ability] This plasma cutter machine automatic 220v(50/60hz),10-50A dc output, 1/2″(12mm) ideal clean cut and 3/5″(15mm) maximum severance cut under 220v,70% duty cycle. The upgraded model only supports 220v voltage input..
  • [Cutting Material] Compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper,cast iron,chrome and aluminum(Aluminum≤1/4″,Copper≤1/5″).
  • [Breaker Recommendation] We suggest a 30A breaker on 220V while using this plasma cutter.Air Pressure 60-70PSI suggested.Btw,this CUT50 plasma cutting machine works well with a generator above 5000W..
  • [Fan-Runs-on-Demand cooling system]The new machine uses powerful cooling system, “dormant” fan,only operates when needed. This cuts down on fan noise, along with reducing power consumption and contaminants drawn into the machine..
  • [Warranty Assurance] We are a manufactory with over 10 years’ experience of professionals producing the plasma cutter machines,3 year’s warranty.Please add to cart and take it without hesitation.
Check Stock

Warfox Plasma Cutter 120/240V Dual Voltage Plasma Cutting Machine, Max Cutting Thickness 14mm, Clean Cutting Thickness 10mm in 65PSI (CUT50D 120/240V)

  • Plasma Cutter, 120V/240V 50A plasma cutter with IGBT inverter technology, long life and efficient higher than mosfet machine. IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting.
  • Plasma cutting machine has current display function and air post time adjustment. Adjustment range is 2-20S, users can adjust the time for post air, effectively providing cooling,extend consumable's working life.
  • Max cutting thickness 14mm ,10mm quality cutting thickness in 240v@65PSI 50A.
  • Under 120V, it is 35Amps.Quality cutting thickness is 8mm, Severance cutting thickness is 12mm.
  • Accessories included:4M PT31 cutting torch, 2.5M Earth clamp,5pcs tips, 5pcs electrodes, 2 meters air hose, 4pcs hose clamp, 1adaptor, 1 manual.Air regulator,air filter,air gauge are fixed at machine.
  • The cutting machine can cut carbon steel, stainless steel, steel and other materials. It is an indispensable machine in your tool room.
Check Stock

Dynaloop Plasma Cutter 50Amps, Dual Voltage 110V 220V Plasma Cutter Machine, 8-10mm Cutting Thickness,16Pcs Plasma Cutting Equipment (DC500D 110V220V)

  • 【Inverter plasma cutter】： DC500D has the function of Inverter technology high frequency arc initiation（50/60HZ）. This plasma cutter needs to touch the workpiece to arc, we suggest pilot arc function If you don't like to touch metal to arc..
  • 【Automatic voltage detection】：Plasma cutting machine can adapt to dual-voltage, whether access 110V or 220V circuit can be automatically identified, and displayed on the front panel, no manual adjustment..
  • 【Air Filter Pressure Regulator Combo】：Plasma cutting machines cut materials by compressing gas(Oxygen,air, inert and others depending on material being cut ), Air regulator inside the machine can lower or maintain air pressure and filter moisture and fine particles from the air to reach effective cutting..
  • 【Cutting Thickness】The plasma cutting machine can cut different thicknesses under different voltages. ✨110V: 35A, 30-50PSI (Quality cutting thickness is 6mm#60PSI(0.6Mpa).
  • Max cutting thickness is 10mm#60PSI( 0.6Mpa)).
  • ✨220V: 50A, 30-70PSI(Quality cutting thickness is 10mm#65PSI(0.65Mpa), Max cutting thickness 14mm#65PSI(0.6Mpa))..
  • 【Portable & Multi-purpose】20lb cutting machine can be carried anywhere to cut workpiece, suitable for cutting stainless steel, alloy steel, low ca....
Check Stock

ARCFONY Plasma Cutter Welder Machine - 50Amp CTS528XP Non-Touch Pilot Arc Plasma Cutter, 3 in 1 200Amp TIG MMA Welders, Dual Voltage 110V/220V

  • ...a cutter, pilot arc technology allows you to cut without touching the tip of the metal, effectively cutting rough, painted and rusty surfaces, producing minimum slag, maximum cutting thickness of 14mm, ideal cutting thickness of 10mm..
  • TIG & MMA Mode: 200Amp tig welder machine adopts HF arc ignition technology and has the functions of HF TIG, spot TIG and pulse TIG. The welding has little damage to the base metal and can weld thin process parts. 180Amp MMA adjustable arc current, arc welding stability. Suitable for 1.0mm to 4.0mm different acid base electrode welding..
  • Easy To Use: Plasma Cutter machine adopts IGBT inverter technology, 110/220V dual voltage automatic recognition of input current and voltage. Plasma Cutter equipped with NPT 1/4 "air regular, Duty cycle is 60%. Built-in post time, when you stop cutting, the air runs for a minute to cool the consumables of the plasma cutting torch and extending the life of consumables..
  • Safe & Portable: Built-in overload protection and fan cooling system. When the output current and machine temperature exceed the set standard, the plasma cutter will automatically ....
Check Stock

Plasma Cutter, 50Amp Dual Voltage 110V/220V Plasma Cutting Machine, Inverter Metal Plasma Cutting Equipment, Maximum Cutting Thickness 5/9\(14mm)

  • 【Plasma Cutter】The CUT-50 cuts rusted, rough or painted surfaces effectively and produces very little dross during the cutting process. CUT-50 plasma cutting machine has better cutting quality and longer wearing parts life..
  • 【Excellent Performance】20-50 A output, 2/5" (10mm) ideal clean cuts and 4/7" (14mm) maximum cut thickness under 220V.
  • 10-35 A output, 1/3" (8mm) ideal clean cuts and a maximum cut thickness of 2/5" (10mm) under 110V. This plasma cutter suitable for cutting alloy steel, stainless steel, copper, aluminum and other metals..
  • 【Dual Voltage Input】This plasma cutting machine supports 110V / 220V switching input power supply. 110V, 50/60Hz @ 35 A input.
  • 220V, 50/60Hz @ 28 A input. The product comes with a power conversion plug, which can be plug and play in different environments..
  • 【Safe & Portable】The plasma cutter is small in size, light in weight, and comes with a handle for easy portability. Plasma cutter with built-in over-heat protection, over-voltage protection, strong heat dissipation, good insulation.Adopt air pressure adjustment device，use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and other metals..
  • 【Package Includes】PT-31 Plasma Torch, Hose, Ground Clip, Power Adapt....
Check Stock

Mophorn 50Amp Plasma Cutter, 110 220V Dual Voltage Plasma Cutting Machine, Max 12MM Thickness Clean Cut, Portable Plasma Cutting Machine IGBT Inverter Digital Plasma Cutting Equipment

  • Powerful Air Plasma Cutter: The Cut-50F plasma cutter can easily cut up to 1/2’’(12.7 mm) metal under maximum output with ultimate portability weighing only 22.7lbs..
  • Compact & Portable: The inverter plasma cutter has a handle and a thoughtful torch design that can provide a sure, comfortable grip, making the whole machine easy to take..
  • High Efficiency & Energy Saving: The cutting machine adopts the inverter technical of switch power, greatly reducing the dimensions and weight of the main transformer. The energy-saving can reach up to 50% as well as efficiency is increased by 30%..
  • Dual Voltage: The ability of the dual voltage allows the plasma cutter to operate at 110V or 220V, with a power of 60HZ. The plasma cutter has the function to supply gas ahead and turn off gas delayed. High cutting speed and cutting smoothly..
  • Wide Application: This plasma cutter can be widely used at automotive, ducting work, repair & maintenance, metal processing, manufacture, site work etc..
Check Stock

Herocut Plasma Cutter, 35Amp Plasma Cutting Machine, HF 50/60Hz Invert Technology Plasma Cutter, Max Cutting Thickness 8mm (CUT35 110V)

  • ✤ Plasma Cutter, 110V 35A cutting machine with IGBT inverter technology, It is long life and efficient higher than mosfet machine..
  • ✤ Very good to cut car flame, Clean cutting thickness 6mm Max cutting thickness 8mm in 110V 60PSI Machine only work in 110V not 220V, Please confirm the voltage before buying this machine. Machine maybe explode if connect it to 220V, Be careful~!.
  • ✤ This plasma cutter with current display and air gauge fixed on panel, Easy read air pressure and current, these functions are great to help the user cut any metal..
  • ✤ The plasma cutter easy to cut stainless steel, Alloy steel, mild steel, Copper etc. Quality cutting torch PT31 come with machine, Max cutting thickness is 10mm at 40Amps 110V 60PSI..
  • ✤ Machine come with 110V power plug, We provide three years warranty for this unit..
Check Stock

Biltek Plasma Cutter 50A Dual Voltage 110V/220V Cutting Torch Kit, 1/2 Inch, IGBT Technology, Portable Plasma Cutter Machine, Metal Cutter for Steel, Copper, Aluminum, Brass, Other Metals + 250V Plug

  • ...nce Plasma Cutter is So Robust, It Can Cut Up To 1/2" Inch Of Thick Steel ! Optimal Cut: 8mm Thick Steel, Max Rated Clean Cut Thickness Cut: 12mm Thick Steel (at 35A 110V 60 PSI), Maximum Severance Cut: 14mm Thick Steel (at 50A 220V 70 PSI) With Cutting Speeds Exceeding 100 Inches Per Minute Our Plasma Cutting Machine Is Extremely Fast.
  • Making It The Most Efficient Way To Cut Metal At Home Or For DIY Hobby Projects..
  • [CUTS LARGE VARIETY OF METALS] Our Plasma Cutter Uses High-Velocity Ionized Gas To Create a Flame Making it Capable of Cutting Any Electrically Conductive Metal Like: Mild Steel, Stainless Steel, Carbon Steel, Expanded Steel, Aluminum, Copper, Brass and Other Ferrous (Iron-Containing) And Non-Ferrous Materials. A Must-Have Home Improvement Machine! Not Only Can You Cut Metal, You Can Also Bevel, Gouge, Mark, And Even Weld! No Other Tool In Your Metalworking Arsenal Is So Flexible..
  • [AUTOMATIC DUAL VOLTAGE- 110/220V [50/60 Hz] The Plasma Cutting Equipment Comes With A Pre-Attached 110V Plug That Can Be Switched With a 220V Plug (Included) for Even More Cutting Power! Connect the Plug to the Power Source and the Machine Automatically Switches To the ....
Check Stock

Plasma Cutter 110&220V 45Amp 1/2\ Clean Cut 3/5'' Max Cut Plasma Cutting Machiner,HF IGBT Inverter Portable Plasma Cutting Equitment for Aluminum Alloy Mild Steel Cast Iron

  • ✅ 【High-Frequency Cut】Professional Plasma Cutter,high-Frequency Plasma cuts thicker materials than standard DC plasma cutters. Cuts faster with less distortion in the workpiece.It is easy to ignite arc by adopting HF arc ignition.With IGBT inverter technology, It is long life and efficient higher than most machine. It is IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting.
  • ✅【Cutting Thickness】20-50A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V. 20-35A DC output: 1/3" ideal clean cutting and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation..
  • ✅【Wildely Application】This plasma cutting machine available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • widely used for automotive, ducting work,repair/maintenance,metal processing,manufacture ect,lightweight and portable,also suitable home DIY and industrial projects ..
  • ✅【Setup Simple】Automatic Dual Voltage Transfer / Dual Frequency (110/120 V 220/240 V 50/60Hz),With the protection of the electric circuit against over currents, over voltages and low voltages, the cutting welder works in a more safer and professional. Air post time adjust function, the adjustment range is 1-....
Check Stock

PrimeWeld Pilot Arc 50A Plasma Cutter 200A TIG/Stick Welder Combo Multipurpose Welding Machine for Home or Jobsite Use with 1/2-inch Clean Cut Plasma Cutter TIG Welder and Stick Welder CT520DP

  • 3-IN-1 PLASMA CUTTER/WELDER COMBO: Combines plasma cutting, TIG/stick welding and Pilot Arc welding functions in one convenient and versatile unit.....
  • TIG WELDER PLASMA CUTTER COMBO: Multipurpose welding machine can cut all types of metals up to 1/2-foot thick with the 50-Amp plasma cutting function.....
  • PORTABLE ARC PLASMA CUTTER: At only 32 lbs., it's ideal for home or jobsite use. Has a 60% duty cycle at max amps for all functions, AC 110/220±15%.
  • VERSATILE WELDING, CUTTING MACHINE: Cuts many metals including stainless steel, aluminum, titanium, cobalt, nickel alloys and cast iron. Includes....
  • GREAT CUSTOMER SERVICE: Backed by a 3-year warranty, we're committed to after-sales service. When you contact us, you speak with real technical....
Check Stock

PrimeWeld 3-in-1 50 Amp Plasma Cutter 200 Amp TIG Welder and 200 Amp Stick Welder - Welding and Cutting Combo Mobile Welding Machine Portable Plasma Cutter Multipurpose Welder and Cutter CT-520D

  • MULTIPURPOSE WELDER AND CUTTER: Cut many metals up to 1/2" thick with the 50A plasma cutting function. The TIG and stick welding settings also work....
  • VERSATILE 3-IN-1 WELDING/CUTTING MACHINE: The 50A plasma cutter is used for cast iron, mild steel, copper, and more. The 200A TIG torch can weld....
  • UNIQUE MULTIPURPOSE WELDING MACHINE/PLASMA CUTTER IN DESIGN & PERFORMANCE: This 200 Amp welder consumes less energy, lowering the operation cost. The....
  • PORTABLE, RELIABLE UNIT: The multipurpose welder and plasma cutter weighs only 32lbs, making it a great portable option. It features a duty cycle of....
  • GREAT CUSTOMER SERVICE: Backed by a 3-year warranty, we're committed to after-sales service. When you contact us, you speak with real technical....
Check Stock