Categories

Best Plaster Board Machine

BAOSHISHAN Cast Removal Saw Cast Cutter Electric Plaster Saw Oscillating Speed Adjustable for Tearing Polymeric Materials 110V BLUE

  • SCOPE OF APPLICATION--This electic plaster saw is used for the removal of plaster bandage after fixed reduction, suitable for all types of plaster bandage, especially suitable for all types high polymer bandage..
  • OPERATORS SAFETY--Electric motor adopts double insulated protection device to ensure safety for the operators..
  • PATIENT SAFETY--The plaster saw uses micro motor with low noise, small vibration and speed adjust from large to small, in the actual test 1-5 gear, gently across the skin will not be injured..
  • OPERATION OF PLASTER REMOVAL--Set the machine to gear 5 or 6 and cut the surface of the plaster. The closer it is to the skin, the slower it should be, turn to low gear..
  • REPLACe BLADE--The blades of plaster saw are consumable, you can buy replacement blades from our shop..
Check Stock

Steel Punches Flower Punch Stamp Set Jewelry Metal Stamping Tools DIY Craft Tool 20 Pcs/set

  • Put the material into the plaster moldbowl,by welding machine suit or tiger skin suit before heating the mold, heating the raw material and add a little borax.003cbr003e.
  • When the gold and silver to complete melt, become optimum flow state ,use die sludge depressed quickly .003cbr003e.
  • After one minute of gold and silver and other liquid solidification.gently tapping the plaster mold with a hammer, plaster mold until the crack.003cbr003e.
  • Removed the jewelery blanks.Wash in the ultrasonic cleaning machine, use a hair to clean the gypsum powder.003cbr003e.
  • Jewelry finishing shape (chain type need to be welding), Finally, deal with the gold drum by agate polishing machine or hand-polished.003cbr003e.
Check Stock

Electric Plaster Saw Speed Adjustable Plaster Cast Cutter for Tearing Polymeric Materials Plaster (110V Green)

  • Oscillating frequency is greater than 12500 times/min. Oscillating angle is 5 degrees..
  • This product is used for the removal of plaster bandage after fixed reduction. Suitable for all types of plaster bandage, especially suitable for all types high polymer bandage..
  • The plaster saw uses micro motor with low noise, small vibration and speed adjust from large to small, in the actual test 1-5 gear, gently across the skin will not be injured..
  • Operation of plaster: Set the machine to gear 5 or 6 and cut the surface of the plaster. The closer it is to the skin, the slower it should be, turn to low gear..
Check Stock

Ships Within 1 Biz Day from NV - Blue Boar Recessed Light Carbide Grit Hole Saw 6-3/8” Dia for 6 inch Lights: Fast Cutting in Drywall, Lath & Plaster, Hardi Board

  • 1" deep - Hard tungsten carbide grit edge for a long life in abrasive materials.
  • Continuous cutting edge for smooth cutting even in wood lath and plaster.
  • Cuts through drywall, plaster (NO Concrete), CornHole board, fiber cement Hardie board, acoustical tile, ceiling tile.
  • Attaches to standard 5/8”-18 2-pin mount hole saw arbor and works with Hole Pro HP1156 Large shield and Arbor kit for straight cuts.
  • SHIPS WITHIN 1 BUSINESS DAY FROM OUR NV WAREHOUSE.
Check Stock

Blue Boar Recessed Light Carbide Grit Hole Saw 4-3/8” Dia for 4 inch Lights: Fast Cutting in Drywall, Lath & Plaster, Hardi Board - Ships Within 1 Biz Day from NV

  • 1" deep - Hard tungsten carbide grit edge for a long life in abrasive materials.
  • Continuous cutting edge for smooth cutting even in wood lath and plaster.
  • Cuts through drywall, plaster (NO Concrete), CornHole board, fiber cement Hardie board, acoustical tile, ceiling tile.
  • Attaches to standard 5/8”-18 2-pin mount hole saw arbor and works with Hole Pro XL-Arbor/Shield Kit or Hole Pro X-230+ model for straight cuts.
  • SHIPS WITHIN 1 BUSINESS DAY FROM OUR NV WAREHOUSE.
Check Stock

Screw Products DW-8212C-20 8 X 2.5 in. Phillips Bugle Head with A Phosphate Coating - 2120 Piece

  • They are excellent for wall board, drywall, plaster board, sheet rock, gypsum board,.
Check Stock

Screw Products DW-6118F-20 6 X 1.12 in. Phillips Bugle Head with A Phosphate Coating - 5520 Piece

  • They are excellent for wall board, drywall, plaster board, sheet rock, gypsum board,.
Check Stock

11 oz. Chalkboard Flat Black Spray Paint (6-Pack)

  • Ideal for creating a custom interior chalkboard on multiple surfaces including wood, metal, masonry, drywall, plaster, glass, concrete, paperboard and hardboard.
  • Apply the oil-based formula over a hard surface for chalk writing on most indoor surfaces.
  • Covers between 95-120 sq. ft and dries to the touch in 30 minutes.
  • Creates a chalkboard that is scratch resistant, smooth and erases easily after use.
  • For optimal results before writing on surface, wait 24 hours after application and condition surface for use by rubbing side of chalk over surface and erasing.
  • Use on wood, metal, plaster, paper-board, hardboard.
Check Stock

6-3/8 Inch Hole Saw with Heavy Duty Arbor, 6 3/8”Recessed Lighting Hole Saw with 1-1/2 Inch Cutting Depth, Bi-Metal Hole Cutter for Smoothly Cutting Ceiling Tile Drywall Plywood Plaster Metal Plastic

  • ...ide grit edge, ensuring perfect drilling performance and providing the fastest, most consistent and longest lasting cutting.
  • 【Recessed Lighting Hole Saw】The 6 3/8inch recessed lighting hole saw can drill precise holes fast in varied ceiling materials like drywall, plywood, ceiling tile, fiberglass, cement board, plaster and MDF.
  • 6Inch recessed light fixtures requiring the 6-3/8" hole saw that suitable for most major brands of 6-Inch (162 mm) recessed lighting fixtures.
  • 【Wide Applications 162MM Hole Drilling Cutter】Made with a continual rim, Bi-Metal hole saw cut metal and wood quickly and cleanly without tearing the material, widely used for cutting 6inch holes in metal, plaster, wood, plastic, acrylic-board, steel and aluminum.
  • Essential home hole cutter for ceiling lights, recessed light, cornhole board, air ducts, speakers, range hood.
  • 【Smooth and Fast Cutting】Designed with the non-binding clean edge and sharp carbide teeth, the heavy duty 6-3/8” hole saw can cutting faster, smoother, and more precise holes than most hole saw on the market.
  • Widely used in plate holes, household wood, galvanized pipe, gypsum board and other opening operations.
  • 【Package & Size】The package includes 1pcs 6-3/8Inch hole saw with 7/16” shank heavy duty a....
Check Stock

GE Silicone GE012 10.1 Oz Clear Window & Door Silicone Rubber Caulk 2 Pack

  • Permanently weatherproof Excellent Flexibility and Strong Adhesion: Provides a flexible, durable seal for and interior projects.
  • Compatible with Most Materials: Adheres to most metals and woods.
  • glass, drywall, plaster, granite, cultured marble, ceramic and porcelain tile.
  • natural stone, cement board, composites, and more.
  • Typical Uses: windows, doors, siding, trim, molding, baseboards, vents, around wires/pipes and other attic/basement applications.
  • Adheres to: Most wood, metal, vinyl siding, drywall/plaster, glass and plastic .Same-Day Rain-Ready: Ready for rain exposure in as little as 12 hours.
  • Meets federal specifications: TT-S-001543A (COM-NBS), TT-S-00230 (COM-NBS), ASTM-C-920 type S, NS, class 25 use NT, G A&O test requirements.
Check Stock

LotFancy Cork Board 1/2 inch Thick Unicorn Design 10” x 16” Cork Bulletin Board with Self-Adhesive Backing Bonus 15 Push Pins

  • UNICORN SHAPE: This cork board measures 10” x 16”, 1/2” (0.5”) thick, push pins will not go through your boards and damage your wall. The....
  • HIGH DENSITY CORK: Made from high density natural cork, not easy to deform, that holds push pins tight and pulling out push needles does not drop....
  • SUPER ADHESIVE: Ultra strong self-stick adhesive covers the entire back of the cork board. Just peel off the adhesive paper from back when using.....
  • WIDELY USE: These push pins can be widely applied on photo wall, maps, bulletin board, cork boards or foam board. Papers, notes, photos, artwork and....
  • USING TIPS: It is suitable for plaster-coated or painted walls, wooden board, glass or plastic, ceramic tile, white paint wall, smooth marble, etc.....
Check Stock

LKEREJOL Aluminum Plate Plastering Hawk Mortar Board Holder Aluminium Home Paint with Handle Finishing Plastering Hawk Plastering Tool

  • ☑【Professional tool】Precision manufacturing controlled by strict quality control measures ensure you get the best Plaster mortar board that....
  • ☑【Save Labor】Used for holding plaster, mortar or any other bonding material wit one hand whilst with the other a trowel or other appliance is....
  • ☑【Material】Made up of aluminium for strength and durability but as well as this it is also lightweight, so not heavy for constant use, with....
  • ☑【Soft Grip Handle】The soft grip sponge rubber handle of the Plastering Hawk ensures optimum comfort and protection from blisters and callus..
  • ☑【Generous Blade Area】The dimensions of the blade is 300mm x 300mm(11.8 inch x 11.8 inch​) to allow a generous amount of mortar to be held for....
Check Stock

ESreake Aluminium Plastering Hawk with Soft Grip Handle Plaster Mortar Board Holder Finishing Plastering Tool for Cement Mortar Drywall 11.8 x11.8

  • Aluminum Blade: The Plastering Hawk blade is made up of aluminium for strength and durability but as well as this it is also lightweight, so not heavy....
  • Soft Grip Handle: The soft grip sponge rubber handle of the Plastering Hawk ensures optimum comfort and protection from blisters and callus..
  • Durable: Precision manufacturing controlled by strict quality control measures ensure you get the best Plastering Hawk that lightweight yet extremely....
  • How to Use: Used for holding plaster, mortar or any other bonding material wit one hand whilst with the other a trowel or other appliance is used in....
  • Floor thickness: 2mm. Package included: 1PCS *Plaster mortar board..
Check Stock