Categories

Best Plaster Board Production Machine

BAOSHISHAN Electric Cast Cutter Plaster Saw Cast Saw for Plaster Bandage with 3 Saw Blades 110V Red

  • SCOPE OF APPLICATION--This electic plaster saw is used for the removal of plaster bandage after fixed reduction, suitable for all types of plaster bandage, especially suitable for all types high polymer bandage..
  • OPERATORS SAFETY--Electric motor adopts double insulated protection device to ensure safety for the operators..
  • PATIENT SAFETY--The plaster saw uses micro motor with low noise, small vibration and speed adjust from large to small, in the actual test 1-5 gear, gently across the skin will not be injured..
  • OPERATION OF PLASTER REMOVAL--Set the machine to gear 5 or 6 and cut the surface of the plaster. The closer it is to the skin, the slower it should be, turn to low gear..
  • REPLACe BLADE--The blades of plaster saw are consumable, you can buy replacement blades from our shop..
Check Stock

BAOSHISHAN Cast Removal Saw Cast Cutter Electric Plaster Saw Oscillating Speed Adjustable for Tearing Polymeric Materials 110V BLUE

  • SCOPE OF APPLICATION--This electic plaster saw is used for the removal of plaster bandage after fixed reduction, suitable for all types of plaster bandage, especially suitable for all types high polymer bandage..
  • OPERATORS SAFETY--Electric motor adopts double insulated protection device to ensure safety for the operators..
  • PATIENT SAFETY--The plaster saw uses micro motor with low noise, small vibration and speed adjust from large to small, in the actual test 1-5 gear, gently across the skin will not be injured..
  • OPERATION OF PLASTER REMOVAL--Set the machine to gear 5 or 6 and cut the surface of the plaster. The closer it is to the skin, the slower it should be, turn to low gear..
  • REPLACe BLADE--The blades of plaster saw are consumable, you can buy replacement blades from our shop..
Check Stock

Carpet Weave Gun Ring Stack Manual Carpet Electric Loom Electric Carpet Tufting Gun Carpet Cutter Flock Machine, Industrial Embroidery Machine, Cutter (Blue Ring)

  • ✅ [High Efficiency]--2400rpm,its production efficiency is 80-100 times of manual production,about 5-40 stitches per second.It has the characteristics of high-speed woven and flexible movement.Save your time..
  • Output DC:24V Small adapter. The machine weighs only 1400g.Has over voltage, over-current and short circuit protection..
  • ✅ [Pile’s Height is adjustable]--Pile height adjustable from 4-14mm(Loop Pile)..
  • ✅ [Note]-- Do not operate the machine when the power is on but the machine is turned off, because there is still power on the circuit board at this time. Pressing the red pin button will cause the capacitor of the circuit board to be destroyed..
  • ✅ [Widely Application]--It is easy to operate, easy to master, long life, less trouble.The machine is portable ,it also produced a huge change in the traditional hand-made carpet,can weave many types of fancy,at the same time more efficient.It suits for you DIY carpet,also suit for carpet industrial..
Check Stock

Set Parquet Molds Old Wooden Boards Concrete Mould Garden Stepping Stone Path Patio - Paver Molds for Concrete Wood Stamp Mold - Stampcrete Concrete Molds - Paver Molds for Concrete Cobblestone

  • The concrete wood mold in one for the manufacture of concrete tiles that mimic old wooden boards.
  • Size of concrete wood stamp mold - 11,75" x 11,75" x 1.2 "(30 x 30 x 3 cm)..
  • Concrete molds wood for paving slabs "Board" is intended for the production of paving slabs from concrete by vibratory casting. Concrete compaction is carried out on a vibrating table. This increases the strength and frost resistance of concrete..
  • Paver molds for concrete made from ABS plastic. Mold thickness 2 mm. Paver molds for concrete cobblestone can be used for casting plaster and concrete..
  • With stampcrete concrete molds can produce more than 50 tiles for arranging garden paths..
Check Stock

Steel Punches Flower Punch Stamp Set Jewelry Metal Stamping Tools DIY Craft Tool 20 Pcs/set

  • Put the material into the plaster moldbowl,by welding machine suit or tiger skin suit before heating the mold, heating the raw material and add a little borax.003cbr003e.
  • When the gold and silver to complete melt, become optimum flow state ,use die sludge depressed quickly .003cbr003e.
  • After one minute of gold and silver and other liquid solidification.gently tapping the plaster mold with a hammer, plaster mold until the crack.003cbr003e.
  • Removed the jewelery blanks.Wash in the ultrasonic cleaning machine, use a hair to clean the gypsum powder.003cbr003e.
  • Jewelry finishing shape (chain type need to be welding), Finally, deal with the gold drum by agate polishing machine or hand-polished.003cbr003e.
Check Stock

Electric Plaster Saw Speed Adjustable Plaster Cast Cutter for Tearing Polymeric Materials Plaster (110V Green)

  • Oscillating frequency is greater than 12500 times/min. Oscillating angle is 5 degrees..
  • This product is used for the removal of plaster bandage after fixed reduction. Suitable for all types of plaster bandage, especially suitable for all types high polymer bandage..
  • The plaster saw uses micro motor with low noise, small vibration and speed adjust from large to small, in the actual test 1-5 gear, gently across the skin will not be injured..
  • Operation of plaster: Set the machine to gear 5 or 6 and cut the surface of the plaster. The closer it is to the skin, the slower it should be, turn to low gear..
Check Stock

Ships Within 1 Biz Day from NV - Blue Boar Recessed Light Carbide Grit Hole Saw 6-3/8” Dia for 6 inch Lights: Fast Cutting in Drywall, Lath & Plaster, Hardi Board

  • 1" deep - Hard tungsten carbide grit edge for a long life in abrasive materials.
  • Continuous cutting edge for smooth cutting even in wood lath and plaster.
  • Cuts through drywall, plaster (NO Concrete), CornHole board, fiber cement Hardie board, acoustical tile, ceiling tile.
  • Attaches to standard 5/8”-18 2-pin mount hole saw arbor and works with Hole Pro HP1156 Large shield and Arbor kit for straight cuts.
  • SHIPS WITHIN 1 BUSINESS DAY FROM OUR NV WAREHOUSE.
Check Stock

Blue Boar Recessed Light Carbide Grit Hole Saw 4-3/8” Dia for 4 inch Lights: Fast Cutting in Drywall, Lath & Plaster, Hardi Board - Ships Within 1 Biz Day from NV

  • 1" deep - Hard tungsten carbide grit edge for a long life in abrasive materials.
  • Continuous cutting edge for smooth cutting even in wood lath and plaster.
  • Cuts through drywall, plaster (NO Concrete), CornHole board, fiber cement Hardie board, acoustical tile, ceiling tile.
  • Attaches to standard 5/8”-18 2-pin mount hole saw arbor and works with Hole Pro XL-Arbor/Shield Kit or Hole Pro X-230+ model for straight cuts.
  • SHIPS WITHIN 1 BUSINESS DAY FROM OUR NV WAREHOUSE.
Check Stock

Screw Products DW-8212C-20 8 X 2.5 in. Phillips Bugle Head with A Phosphate Coating - 2120 Piece

  • They are excellent for wall board, drywall, plaster board, sheet rock, gypsum board,.
Check Stock

MicroPrimer™ is a water based penetrating quartz primer made in Italy exclusivly for Italian lime plasters. Helps to create a bond between your plaster and wall.

  • ...rylic plasters, authentic lime plasters stay clean on the surface and inside the walls. Lime plaster keeps a healthy indoor living environment..
  • TRUST FIRMOLUX: FirmoLux is an international distribution company with its roots in Italy. The plasters they import have been in production for centuries in the Veneto region of Northern Italy. FirmoLux has been distributing these fine plasters in North America for almost 15 years. Italian lime plasters are used in commercial and residential buildings. These include estate homes, luxury resorts, private corporate offices, and historical restorations in the government and private sector..
Check Stock

Screw Products DW-6118F-20 6 X 1.12 in. Phillips Bugle Head with A Phosphate Coating - 5520 Piece

  • They are excellent for wall board, drywall, plaster board, sheet rock, gypsum board,.
Check Stock

11 oz. Chalkboard Flat Black Spray Paint (6-Pack)

  • Ideal for creating a custom interior chalkboard on multiple surfaces including wood, metal, masonry, drywall, plaster, glass, concrete, paperboard and hardboard.
  • Apply the oil-based formula over a hard surface for chalk writing on most indoor surfaces.
  • Covers between 95-120 sq. ft and dries to the touch in 30 minutes.
  • Creates a chalkboard that is scratch resistant, smooth and erases easily after use.
  • For optimal results before writing on surface, wait 24 hours after application and condition surface for use by rubbing side of chalk over surface and erasing.
  • Use on wood, metal, plaster, paper-board, hardboard.
Check Stock

harayaa Hot Wire Electric Foam Styrofoam Cutter Table Machine Physics Teaching Aids

  • It is not suitable for children with this machine. Do not exceed 40 minutes for a single continuous . has a switch be used intermittently!.
  • The temperature of the wire is high when , so please keep away from and materials!.
  • Hot Wire Foam Cutter Foot Control Pedal 2021 Tabletop Hotwire Cutter for , Forming and Sculpting and Other Foam Materials..
  • Especially suitable for building, planning units, advertising enterprise production model use, teaching model, small scale foam, , extruded board production..
  • Some materials will smell when , recommended in a ventilated environment..
Check Stock