Categories

Best Plasterboard Hanging Tool

Garage Hooks, 19 Pack Heavy Duty Garage Storage Hooks Steel Tool Hangers for Garage Wall Mount Utility Hooks and Hangers with Anti-Slip Coating for Garden Tools Organizer, Ladders, Bikes, Bulky Items

  • ...hooks,2 medium S type garage hooks,2 medium ? type garage hooks.The weight capacity various from different forms of hooks and wall construction.It also has four different sets of 74 screws,one screwdriver and 4 storage straps.Hang items of all sizes for you..
  • 【EASY TO INSTALL】:These garage hooks are suitable for plasterboard,wood,brick concrete walls.For plasterboard,1)marking the position of two wide hole center at plasterboard(spacing 1.35 inches apart),2)insert drywall anchor into the drilled hole,then a screw is tightened into the centre.For wooden,brick concrete wall,1)marking the center position of two narrow holes on the surface(spacing 2.17 inches apart).2)Insert plastic plug into the drilled hole,then a screw is tightened into the centre..
  • 【GREAT GIFT &RISK-FREE PURCHASE】：If you're not happy with the purchase for any reason, please contact us via email, we'll put a smile back on your face within 24 hours, risk-free purchase with the promised replacement for free or the refund. Give a try?.
Check Stock

Garage Hooks, 19 Pack Heavy Duty Garage Storage Hooks Steel Tool Hangers for Garage Wall Mount Utility Hooks and Hangers with Anti-Slip Coating for Garden Tools Organizer, Ladders, Bikes, Bulky Items

  • ...hooks,2 medium S type garage hooks,2 medium ? type garage hooks.The weight capacity various from different forms of hooks and wall construction.It also has four different sets of 74 screws,one screwdriver and 4 storage straps.Hang items of all sizes for you..
  • 【EASY TO INSTALL】:These garage hooks are suitable for plasterboard,wood,brick concrete walls.For plasterboard,1)marking the position of two wide hole center at plasterboard(spacing 1.35 inches apart),2)insert drywall anchor into the drilled hole,then a screw is tightened into the centre.For wooden,brick concrete wall,1)marking the center position of two narrow holes on the surface(spacing 2.17 inches apart).2)Insert plastic plug into the drilled hole,then a screw is tightened into the centre..
  • 【GREAT GIFT &RISK-FREE PURCHASE】：If you're not happy with the purchase for any reason, please contact us via email, we'll put a smile back on your face within 24 hours, risk-free purchase with the promised replacement for free or the refund. Give a try?.
Check Stock

Gypsum Board Cutting Tool Multifunctional Woodworking Panel Cutter with Tape Measure kt Board Cutting Tool Kit Includes 1 Gypsum Board Cutter, 1 Pencil and 5 Blades

  • ...itable for gypsum board, foam board, KT board, cardboard insulation material, hanging pictures, cutting fabric, plywood and other places, with a wide range of uses.
  • It is also the nice gift choice for friends, famliy and craft lovers on birthdays or other holidays.
  • Package includes: the package comes with a piece of plasterboard cutters, a pencil for recording and 5 pieces extra replaceable blades, totally 7 pieces.
  • The built-in blade storage box will not touch the blade or hurt your hands, improving safety.
  • Save time and effort: the paper cutter is equipped with a tape measured up to 5 meters long, so you can easily grasp and accurately cut the required size.
  • It is also faster and more convenient to draw circles and straight lines.
  • With the strong locking device, you can easily measure and transfer to any material.
  • One measurement, one cutting, fast cutting, no dust.
  • Simple operation: only need to press the button and insert the blade to complete the installation.
  • When in use, pull the tape measure to the desired position and push the baffle by hand to accurately draw a circle or a straight line, fast and convenient.
  • It can be easily applied to both novices and skilled workers.
Check Stock

ISPINNER Wall Anchor Setting Tool with 18pcs Molly Bolt Hollow Drive Wall Anchor Screws Assortment Kit, Heavy Duty Anchor Gun for Cavity Anchor Plasterboard Fixing

  • ★High Quanlity :Power tool is made of solid metal with non-slip rubber grips. Hollow wall anchor are made of stainless steel with high quality zinc plated..
  • ★WALL ANCHOR BOLTS – multiple sizes to deal with all manner of requirements..
  • ★Hollow wall anchor expansion when installing, providing strong bearing capacity and safety.The strength of the anchor is relative to the size of its spread..
  • ★Including:4x32mm 5pcs,4x38mm 5pcs ,5*37mm 5pcs ,5*52mm 5pcs ,6*52mm 5pcs ,6*65m 5pcs,Hollow Anchor Gun 1pc.Total 31pcs ,packed in a durable box, convenient for your use and storage..
  • ★Application:Hollow wall anchors are designed for use in thin or hollow walls such as drywall, plasterboard, and other board materials.Perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches..
Check Stock

The Best of Metal Blade, Vol. 2 [Vinyl]

  • EZARC oscillating saw blade with carbide teeth can easily handle the toughest metal applications with 30 × life vs Bi-Metal blades..
  • Upgrade carbide laser welding technology with a slim body makes the blades extremely strong and durable for heavy duty nails cutting..
  • Super endurance for hardened materials, e.g. stainless steel, hardened screws and nails, fiberglass and plasterboard boards, etc..
  • The 'MUST HAVE' caribe oscillating multi tool blades are designed for tough cutting jobs on hard material..
  • Our universal oscillating tool is suitable for professionals and DIYers. Two extra adapters fit most of the conventional oscillating tools on the market..
Check Stock

IRWIN Tools MARATHON Carbide Table / Miter Circular Blade, 12-Inch, 100T (14084)

  • Ultra-thin kerf delivers more cuts per charge and extends cordless tool battery life..
  • 400 grit diamond-ground construction-grade carbide teeth make for fast, clean cuts and long tool life. The aggressive hook angle cuts fast..
  • Blade is precision-tensioned and balanced for optimal performance with miter and table saws where smooth finish and accurate cuts are critical..
  • 100 tooth count blades make ultra-smooth cuts in laminates, plywood, cement board and plasterboard..
Check Stock

DOITOOL 1PCS Small Hand Planer for Woodworking Mini Wood Planer Hand Tool,Carpenter Hand Planes for Woodworking,Trimming,Wood Planing,Surface Smoothing

  • Suitable for wood plate and plasterboard..
  • Simple to use, an necessary tool for woodworking starters..
  • Made of high quality material for lasting use.Without handle, easy to carry..
  • Sharp blade, it can provide efficient using experience..
  • Package Including:1 x Small Hand Planer for Woodworking Mini Wood Planer Hand Tool,Carpenter Hand Planes for Woodworking,Trimming,Wood Planing,Surface Smoothing.
Check Stock

Hillman Fastener 42074 Ss Trim Nail, 1-1/4\

  • Material: The steel nails are made of carbon steel, which is not easy to bend and has strong penetrating power..
  • Great Demand: There are great demand for wire nails in reinforcing the wooden planks that are fabricated during the initial construction of houses and building..
  • Application: Thinner shank reduces wood splitting, electroplating treatment is not easy to rust. Widely used in construction, woodworking, cement walls, plasterboard, etc..
  • Note: Cement nails are not suitable for hanging heavy objects on concrete walls, which may be unstable..
Check Stock

GripIt Drywall Anchor Fixing Kit Holds Up To 250 Pounds or 113 Kilograms Of Weight. Perfect For Hanging Heavy Such as TVs, Boilers, Cabinets on Plasterboard Walls.. Removable and Reusable Screws (32 Fixings)

  • ...p to 400lbs of weight. It can safely hold any standard sized television, radiators, speaker, picture frames, kitchen cupboards, water heaters or any type of wall accessories..
  • Removable and reusable screws that are ideal for Dot and Dab wall installations. Suitable for all plasterboard types (1/2inch to 5/8inch) without the need for battening or additional anchor points. It also works on insulated plasterboard types..
  • Made from high industrial grade, durable materials that can withstand heavy loads. Made in United Kingdom (UK)..
Check Stock

EZARC Oscillating Tool Blades Carbide Multitool Saw Blades for Hard Material, Hardened Metal, Nails, Bolts and Screws, 3-Pack

  • EZARC oscillating saw blade with carbide teeth can easily handle the toughest metal applications with 30 × life vs Bi-Metal blades..
  • Upgrade carbide laser welding technology with a slim body makes the blades extremely strong and durable for heavy duty nails cutting..
  • Super endurance for hardened materials, e.g. stainless steel, hardened screws and nails, fiberglass and plasterboard boards, etc..
  • The 'MUST HAVE' caribe oscillating multi tool blades are designed for tough cutting jobs on hard material..
  • Our universal oscillating tool is suitable for professionals and DIYers. Two extra adapters fit most of the conventional oscillating tools on the market..
Check Stock

The Hillman Group 42058 Fluted Masonry Nails, Black

  • Package Content: 150pcs(+/-5%) x Carbon Steel Cement Nail.
  • Material: The steel nails are made of carbon steel, which is high hardness, not easy to bend and has strong penetrating power. Electroplating treatment is not easy to rust..
  • Great Demand: There is great demand for nails in reinforcing the wooden planks that are fabricated during the initial construction of houses and buildings..
  • Application: With a part of the threaded structure on the rod to prevent loosening after installation. Thinner shank reduces wood splitting. Widely used in construction, woodworking, cement walls, plasterboard, etc..
  • Note: Cement nails are not suitable for hanging heavy objects on concrete walls, which may be unstable..
Check Stock

Maze Nails CMH16112 1LB 16D Masonry Nail, 3-1/2 Inch

  • Package Content: 150pcs(+/-5%) x Carbon Steel Cement Nail.
  • Material: The steel nails are made of carbon steel, which is high hardness, not easy to bend and has strong penetrating power. Electroplating treatment is not easy to rust..
  • Great Demand: There is great demand for nails in reinforcing the wooden planks that are fabricated during the initial construction of houses and buildings..
  • Application: With a part of the threaded structure on the rod to prevent loosening after installation. Thinner shank reduces wood splitting. Widely used in construction, woodworking, cement walls, plasterboard, etc..
  • Note: Cement nails are not suitable for hanging heavy objects on concrete walls, which may be unstable..
Check Stock

FOREVTL Dry Wall Anchors and Screws Kit - 32pcs Drywall Anchors Heavy Duty Includes 8 Different Assorted Size Anchors and Screws and Installation Plier with Organizer Box

  • Perfect Solution for Hollow Walls: Hang things up easily on drywall and plasterboard with this hollow wall anchor kit..
  • Convenient & Comprehensive Package: This molly bolts setting tool includes everything you need, so you won't need to worry about buying extra screws or tools. It comes with a hollow wall anchor setting tool and 32 molly bolts in 8 different sizes, all packed in a double-sided box for easy storage and use..
  • Durable and Safe Setting Tool: The molly bolts setting tool is made of 2.5mm thickened reinforced carbon steel with heat treatment for corrosion resistance and deformation resistance. The ergonomic, non-slip grip shape of the tool also helps to prevent injuries while using it..
  • High-quality and Versatile Molly Bolts: These zinc plated carbon steel bolts are heavy-duty and can be used both indoors and outdoors. They offer a holding power of 40-65 pounds depending on size, ensuring that your items stay safely and securely in place..
  • Easy to Use and Remove: Drilling the hole, driving the anchor into the drywall, backing the screw out about 1/4", mount....
Check Stock