Categories

Best Plastic Angle Valve

6-Pack Valve Stem Extenders, Mellbree 45 Degree 90 Degree 135 Degree Schrader Tire Valve Extension Compatible for Dual Wheels Passenger Cars, RV, Stroller, Bicycles, Motorcycles and Trailers

  • Three kinds of valve stem extension（45 degree, 90 degree and 135 degree）successfully solved a series of operations such as inability to pump or check air pressure due to insufficient space between the valve and the spokes, or the inconvenient position and angle of the valve. Due to the built-in valve core, they can allow inflation and deflation, which is convenient and quick. Be sure to tighten the thread when using it, otherwise the best sealing effect cannot be achieved..
  • The tire valve extension joint is made of brass, the surface is chrome-plated, the chrome-plated layer has higher hardness, better heat resistance, and is not easy to rust. Equipped with rubber sealing ring and sealing cover, durable. The bottom of the extension piece rotates freely, which is easy to operate, convenient and efficient..
  • Prevent air leakage! 1. Install the valve angle extension on the valve core, and be sure to tighten the thread of the rotating part so that there is no air leakage. 2. When you are adjusting the angle, you rotate the valve extension. After the angle adjustment is over, you must tighten the rotating thread to the maximum. 3. The threaded head on the valve extenders is screwed on the existing valve stem, and the included end cap replaces the existin....
Check Stock

Frizzlife Brass Feed Water Adapter - 3/8 inch,3/8 inch Comp and 1/4 inch OD Compression Angle Stop Valve Adapter for Reverse Osmosis Water Filters, Coffee Brewers,Ice Maker

  • TEE UNIOn ADAPTER: 3/8″ Thread male(Diamater 14.28mm) x 3/8″ thread female(Inner diameter 12.96mm) x 1/4″ tube(Plastic Tubing only) quick connect with compression..
  • ROUGH BRASS CONSTRUCTION: Full copper material to prevent leakage.
  • INSTALLS IN SECOND: extremely easy to load and unload..
  • APPLICATIONS: Adapt to most home kitchen feed water supply to Water filters, Reverse Osmosis water system, etc. Fits for angle stop valve BrassCraft, EZ-Fluid, PROCURU, SharkBite.
Check Stock

Water Filter Float Ball Valve 1/4 Inch Adjustable Float Valve Plastic Water Tank Float Valves for Ponds, Water Pump, Water Trough, Aquariums, Aquaculture, Water Tank, Reservoir (4)

  • ...ves according to the size of the water tank to meet your needs in different situations.
  • The ball of the water float valve is made of PE material, the other parts are made of POM material, low temperature resistance and corrosion resistance, durable and non-toxic, can serve you for a long time.
  • Adjustable design: the plastic water tank float valves come with adjustable arms, when the water level of the water tank is low, the gate of the float valve opens to ensure that water can enter, when the water level rises, the ball of the water float valve and the adjustable arm will form a flat angle and close in this state, realizing the automatic adjustment of high water level and low water level.
  • Wide applications: the adjustable sink float valve can be applied for ponds, small water tanks, toilet storage tanks, household water purifiers, pools, aquariums, aquaculture, reservoirs, industrial and large water tanks, etc., if needed, you can choose to use multiple float valves at the same time, so that water can be input faster.
  • Easy to operate: the angle of the valve ball is adjustable, you can flexibly set according to the requirements of the water level, automatically control the water level, no power or pump is required, the water float valves are applicable ....
Check Stock

YUHX Lead Free Brass Angle Stop Add-A-Tee Valve, Bidet 3/8 x 3/8 x 3/8 Inch Compression or 1/2 T Adapter for One-Piece Skirted Toilet , 3/8' Compression Outlet Easy Connect 3 Way Diverter

  • 1 ★【 Connect Multiple Items 】 Used for adding an outlet on existing 3/8 compression angle stop valve to supply water for faucet , dishwasher , glass rinser , bidets et.
  • Suitable for both cold and hot water systems.
  • 2 ★【 Heath and environment friendly material 】Lead free brass , chrome-plated tee valve for both potable and non-potable water . For adding an outlet on a angle stop valve for a bidet , water filtration system, dishwasher, second faucet, etc.Used for adding an outlet , Install on angle stop valve.
  • 3 ★【 Ideal 3/8 water line splitter 】1/4 turn tee stop valve,so you can freely control on-off of the branch waterway and adjust water flow size to suit your needs.
  • 4 ★【Outstanding performance】Built-in rubber ring for better sealing . It's the perfect alternative for people who have a one piece toilet where access to the 7/8 water tank valve is not possible or too cramped to reach.
  • This T-Adapter can be installed on a 3/8" OD compression threaded water supply to divert to your bidet and toilet fill valve.
  • 5 ★【 T-valve size 】3/8" OD female compression x 3/8" OD compression x 3/8" OD compression or 1/2 thread ,the 3/8 t adapter has 3 outlets , which can be used as one water inlet , two water outlets.
Check Stock

Hromee Tire Valve Stem Tool Puller and Installer Kit, 4PCS TR413 Tubeless Snap-in Valve Stem with Valve Stem Cores, Single Head Valve Core Remover and Slotted-Head Valve Cap

  • ...cores and the bottom can be used as tire caps to prevent air leaking and dust. The little caps are made of highest quality nickel-plated brass and with a seal washer inside..
  • SINGLE HEAD REMOVER - All the accessories in this kit includes single head valve remover and 4 pieces valve cores. The valve stem core tool is plastic & stainless steel and with a handy pocket clip beside for easy carrying. The completed valve stem replacement tool kit is a perfect one for removing old leaky or faulty valve stems..
Check Stock

Brass Shower Arm Diverter Valve for Handheld Shower Head and Fixed Spray Head G1/2 3 Way Universal Bathroom System Component Replacement Part, Polished Chrome

  • ... of outlets. When handle lever is upward in 90°, both two outlets discharge water simultaneously, but water flow is halved of each outlet and depends on your water pressure..
  • ✅【Solid Brass Material】：Shower diverter valve is bulit in one-piece solid brass construction body material, all metal, heavy-duty, no plastic. Sturdy and wear resistant, well resists high water pressure and high temperature, durable to use than plastic. Premium elegant Polished finish resists corrosion and tanish for long-time use. Easy for daily clean and maintain. Designed with a big flow channel, this Polished shower diverter has no water flow limitations..
  • ✅【Easy Installation & Well Operation】：This handheld shower diverter is simple to install with a metal slip nut without plumbers. Just tighten the swivel nut and adjust the position or angle you want. All needed accessories are included in the package for you. A sturdy metal handle lever operates easily and turns smoothly to switch water. No leakage, a free teflon tape is included..
  • ✅【Multi-Scene Use】：The chrome finish is easy to match with various styles of bathroom fixtures. Suitable for 3-way diverter of shower arm/shower set/bath faucet..
Check Stock

385311641 Water Valve Kit, Plastic RV Camper Toilet Valve Parts for Pedal Flush Valve Toilets Compatible with Sealand 300 310 311 320 and 321 Series RV Marine Toilet Flush Valve Replacement (1 Piece)

  • Quality material: this 385311641 water valve kit made of quality ABS plastic material, sturdy construction to prolong the serve life and performance of this rv toilet parts.
  • Nicely fix and fit your toilet's hardware.
  • Applied for: the rv toilet valve parts and flush ball gaskets are compatible with Sealand 300/ 310/ 320 RV, Camper, trailer toilets, very practical.
  • Easy to use: you just need to snap the rv flush valve in, secure with 2 screws, and reconnect water lines.
  • Make it easier on yourself if you don't have ample room behind your toilet and use a mirror (or your phone in selfie mode) so that you can see the back of the assembly.
  • Nice combination: you will get 1 x toilet valve, 1 x rv toilet ball seal replacement, 1 x hose clamp, 2 x stainless mesh filters and 2 x screws.
  • Warming tips: check part numbers to ensure proper fit.
  • During the installing the rv water valve, please insure to install button with the correct angle in case that being broken.
Check Stock

ROYHOO 4PCS 1/2 Inch Float Ball Valve Plastic Water Float Valve Mini Plastic Float Valve with Adjustable Arm for Automatic Water Level Control of Water Tank

  • Material: the body of the body is made of quality ABS plastic material, which is featured with good heat resistance and impact resistance of PC resin, not corrode or rust. The float is made of PE material with nice stability. The valve core is made of silicone material which is non-toxic and odorless, safe for you to use..
  • Easy to use: you can have a automatic water level control by adjusting the angle which is formed by the float and the valve body, if the surface of water contacts the float, the water inlet switch will be automatically closed..
  • Quantity and measurement: we provide you with a total of 4 pieces 1/ 2 inch float ball valves, the valve total length is approx. 7.87 inch and a float length is about 3.74 inch, you can install different numbers of the water valves according to the size of the tank or pool..
  • Suitable condition: the float ball valve can be adapted to water temperature which ranges from 0 to 70 degrees Celsius, 0.01-0.8MPA water pressure is applicable, featuring with good control of the water inlet, will give a nice using experience to you..
  • Multifunction: our plastic water filter float ball valves are suitable for a variety of occasions, such as small swimming pools and storage tanks at home, more numbers of water valves should b....
Check Stock

uxcell Solenoid Valve Water Inlet Seal Ring Gasket Normally Closed Seals Sealant Kits Accessories 1/2‘’ Thread

  • Advantage: If the seal ring is used for too long, it will naturally erode, then lose its function, or leak oil due to its poor function. Replace the new seal ring to make the solenoid valve work normally..
  • Applicable to the normally closed inlet valve and drain valve..
  • Total Size: 9.5x26mm/0.37‘’x1.02''(HxD).
  • Installation angle: Right Angle (90 degrees).
  • Package:1 x Solenoid Valve Water Inlet Seal Ring.
Check Stock

EZ-Fluid Plumbing 3/8-Inch O.D Female Compression x 3/8-Inch O.D Male Comp A Lead-Free Brass Quarter Turn Water Shut Off Straight Repair Add On Stop Ball Valve,Chrome For Kitchen,Bathroom Faucet 1Pc

  • EZ-FLUID Plumbing Chrome Brass Water Shut Off Valve, Straight Angle Stop Valve Use for Kitchen, Bathroom Faucet Water Valves and Toilet Water Valve.
  • Lead-Free Quarter Turn Ball Valve Straight Angle Stops 3/8-Inch Female O.D. Compression Captured Nut x Outlet: 3/8-Inch O.D. Male Comp w/ Brass nuts....
  • Fits on top of faulty valves to provide a shut off quick fix.
  • Lead free Chrome Finished brass approved product in all states.
  • Pack of 1 pc 1/4 turn straight add on angle stop repair water shutoff ball valve Approved By UPC, NSF.
Check Stock

ChgImposs 1/4' Thread Flexible Water Oil Coolant Pipe Hose, Round Nozzle Adjustable Plastic Cooling Tube with Switch for CNC Machine/Milling/Lathe/Hydraulic Machinery/Water Cooling System

  • Made of plastic, non-poison, resistant to corrosion and tension, flexible, has long lifespan, easy setting..
  • This cooling tube adopts a plastic flexible body, light weight and easy to install with any direction and angle..
  • Designed with a convenient valve so you can easily open or close fluid..
  • Widely used for lathe, milling, CNC machine, hydraulic machinery and water cooling system. Adjustable body make it easy to change the shape and angle to meet your need..
Check Stock

12 Inch Square Shower System and 24 Inch Linear Shower Drain with PVC Base

  • 2 in 1 Shower Head Combo: Each shower features oversize 4.375 Inch large face with click lever dial and rub-clean jets. 6 Settings include: Power Rain, Massage, Stay-Warm Mist, Water-saving Economy Rain and Pause..
  • Patented 3-way Diverter: The shower kit has Patented 3-way Water Diverter with Anti-Swivel Lock Nut. Angle-Adjustable Overhead Bracket allows you to flexibly adjust the angle of the handheld shower holder within 180 degree. The shower angle can be easily adjusted to suit children and adults, providing a perfect shower experience for every family member..
  • Prevent Water Hammer: This pressure balance valve has built-in Shut Off Stops to effectively prevent water hammer noise and control the water pressure. Pressure balance valve's cartridge monitor water pressure balance, helping to protect you from being scalded by sudden changes in hot or cold water pressure..
Check Stock

Eastman 1/2 Inch FIP x 3/8 Inch OD Compression Multi-Turn Angle Stop Valve with Brass Stem, Brass Plumbing Fittings, Chrome, 10809LF

  • ANGLE SHUTOFF VALVE: The Eastman multi-turn angled stop valve is designed to control the flow of water in household fixtures such as ice makers, faucets, dishwashers, and toilets, eliminating the need to turn off the water supply to the entire home when maintenance is required.
  • COMPATIBILITY: Quarter turn angle valves are ideal for use with with faucets, toilets, dishwashers, and ice makers.
  • LEAK PROOF: Diverter shut off valve features a leak-proof performance with Teflon seats, and a removable sure-grip metal handle features an oval design for an easy grip.
  • LEAD FREE: Angle stops are composed of durable lead free DZR brass with a sleek chrome finish, and are compliant for potable water drinking applications.
  • SPECS: PEX water shut off valve features a working pressure of 125 PSI, and a working temperature of 40 degrees F to 140 degrees F.
Check Stock