Categories

Best Plastic Bushings

VOGREX NEMA 14-50P RV Replacement Male Plug, 125/250V 50 Amp with Disconnect Handle, Black

  • Rated voltage 125/250V 50A, suitable for connecting 6/3+8/1 caravan wires, replacing female 50A caravan wires, perfect replacement for old/worn plugs of caravans, campers, caravans, motorhomes, trailers, 5th wheelers, etc..
  • Equipped with an ergonomic handle, the newly designed handle keeps your fingertips away from the power plug when plugging and unplugging for better energy savings!.
  • ETL certified, internal strain relief clips and external bushings hold the cable securely in place. Made of high heat and durable heavy duty ABS plastic. Please buy with confidence!.
  • Use conductive copper pins and flame retardant ABS plastic housing with strain relief clips and bushings to hold wires in place for more stable and secure wire connections!.
  • Follow clear instructions to easily connect and reassemble wires. Guidance is welcome with our no-hassle 12-month warranty. Please feel free to contact us..
Check Stock

DEF Door Bushing Removal Tool Hinge Liners for Wrangler JK JKU JL JLU Gladiator JT 2007-2021 (Removal Tool and 2 Pins)

  • Fit: Door Bushing Removal Tool for Wrangler JK JL 4 Door 2008-2019 ..
  • Material: Made of stainless steel, great performance and repeated use are guaranteed. High quality bushings never rust .The inserts are made of plastic..
  • Function: These door pin guides help you line up your door pins and put your doors back easily. The door bushing removal tool helps to disassemble your Wrangler corrosive hinges..
  • Usage: By using the door pin guides align the top cap and lower the door so that the bottom is in place. By using a hammer, to tap the door bushing removal tool until the OE liners are totally disassembled. If you find that it is not suitable for your car，use some type of grease or lube for the new bushings and use a rubber mallet to get them in place. Maybe it works well..
  • Package include: 1 silver door bushing removal tool, 8 bushings and 2 Pins.Door Bushing Removal Tool did not fit TJ.
Check Stock

Bushing Ford 2000 3000 4000 Tractors

  • Includes: 6 Pieces of Steering Shaft Bushings as pictured.If you have a loose steering wheel, you may need to use these bushing.if you have to replace your pinion gear and sector gear due to worn teeth then replace these bushings also, these bushings being worn is most likely the cause of the pinion and sector gears wearing out.
  • Steering Shaft Bushings Fits for John Deere lawn mower D100, D105, D110, D120, D130, D140, D150, D160..
  • Steering Shaft Bushings Fits for John Deere lawn mower L100, L102, L105, L108, L110, L111, L115, L118, L120, L125, L130, L135, L145 102, 105, 115, 125, 135, 145, 155C, 190C.
  • Steering Shaft Bushings Fits for John Deere lawn mower 90C X105, X110, X115, X120, X125, X135, X140, X145, X155R, X165.
  • Specification: Steering Shaft Bushings Replace for John deere OE Part Number GX21994.
Check Stock

Dime Bag Hardware Skateboard Truck Rebuild Kit Bushings Washers Pivot Cups for 2 Trucks (96A Red)

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features conical top bushings and cylindrical bottoms bushing, along with pivot cups and cup washers.
  • Package includes a set of 2 top bushings, 2 bottom bushings, 2 pivot cups, and 4 cup washers, which is enough to outfit your entire skateboard (kit includes bushings for 2 trucks).
Check Stock

Dime Bag Hardware Skateboard Truck Rebuild Kit Bushings Washers Pivot Cups for 2 Trucks (88A Blue)

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features conical top bushings and cylindrical bottoms bushing, along with pivot cups and cup washers.
  • Package includes a set of 2 top bushings, 2 bottom bushings, 2 pivot cups, and 4 cup washers, which is enough to outfit your entire skateboard (kit includes bushings for 2 trucks).
Check Stock

(2) Front Suspension Stabilizer Bar Links For Silverado Escalade Tahoe Sierra Yukon K700538 K700432

  • VEHICLE FITMENT Before purchasing, please use fitment checker on top left to confirm proper vehicle fitment. If you have any questions regarding fitment, please reach out to us..
  • SLEEVE/SPACER Plastic OEM-Style Spacer. Refresh your old OEM links with these upgraded replacements..
  • COATING Hardware coated in Dacromet, an industry leading plating for ultimate protection..
  • BUSHINGS High Quality Made In USA Code Red Bushings that will outlast the others on the market today..
  • THREAD LOCK Bolt pre-applied with thread-locking adhesive to prevent premature failure due to nut disengaging..
Check Stock

Morris 22328 Snap Bushings, 1.50-Inch, Black, Pack of 10

  • Electrical Bushings Snap Bushings - Snap Bushings for Metal Panels keep wires safe..
  • Snap bushings Eliminate Sharp Edges and insulate your sharp-edged holes in metal panels.
  • Easily Locks into Hole firmly with fingertip pressure.
  • Snap Bushings Protect Electrical Cables, ropes, utility lines passing through metal chassis.
Check Stock

Orangatang Nipples Soft Longboard Skateboard Truck Bushings (Orange, Set of 4)

  • LIVELY LONGBOARD BUSHINGS – The Orangatang Nipples are big and lively bushings designed to help you bounce out of every carve with tons of energy and rebound..
  • LARGE BARREL SHAPE – Slightly wider and taller than most stock truck bushings, the Nipples provide your trucks with more support and more material to squish, making for a highly responsive ride..
  • RANDY THANE – The ideal urethane formula for energetic, high-rebound bushings. Make your trucks come alive!.
  • THE PERFECT SET – Each pack contains two taller bottom bushings (0.66"), two shorter top bushings (0.56"), and four thin and strong flat washers..
  • SOFT – Great for tight turns and maximum response..
Check Stock

Skateboard Longboard Truck Replacement Bushings 4-Pack (for 2 Trucks) - Many Colors and Durometers (88A Blue)

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features a conical top bushing and a cylindrical bottom bushing.
  • Package includes a set of 2 top bushings and 2 bottom bushings, which is enough to outfit your entire skateboard (kit includes bushings for 2 trucks).
Check Stock

Skateboard Longboard Truck Replacement Bushings 4-Pack (for 2 Trucks) - Many Colors and Durometers (96A Red)

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features a conical top bushing and a cylindrical bottom bushing.
  • Package includes a set of 2 top bushings and 2 bottom bushings, which is enough to outfit your entire skateboard (kit includes bushings for 2 trucks).
Check Stock

Dime Bag Hardware Skateboard Truck Rebuild Kit Bushings Washers Pivot Cups for 2 Trucks 98A Black

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features conical top bushings and cylindrical bottoms bushing, along with pivot cups and cup washers.
  • Package includes a set of 2 top bushings, 2 bottom bushings, 2 pivot cups, and 4 cup washers, which is enough to outfit your entire skateboard (kit....
Check Stock

Dime Bag Hardware Skateboard Longboard Truck Replacement Bushings 4-Pack (for 2 Trucks) - Many Colors and Durometers (92A Green)

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features a conical top bushing and a cylindrical bottom bushing.
  • Package includes a set of 2 top bushings and 2 bottom bushings, which is enough to outfit your entire skateboard (kit includes bushings for 2 trucks).
Check Stock

Alpinista Skateboard Bushings Kit for 2 Skateboard Trucks Washers Pivot Cups, Black

  • Premium Material: These skateboard bushings are made of hardness PU materials, wear-resistant and will not crack..
  • Note: Softer bushings (85A-92A) are used for lighter riders or riders who like loose trucks. Harder bushings (95A) are for riders who want really stiff trucks for a stable ride..
  • Wide Applicable: Suitable for most 7 inch skateboard trucks, provide you with a nice firm ride..
  • Complete Set: Package includes a set of 2 top bushings, 2 bottom bushings, 2 pivot cups, and 4 cup washers, which is enough to outfit your entire skateboard..
  • Easy to Store: the skateboard bushings, pivot cups and skateboard bushing washers are packed in a box, which is small in size and convenient for you to carry and store..
Check Stock