Categories

Best Plastic Fuel Tank

Atima Generator Accessories – Extended Run Dual Fuel System Extender Kit for Honda Generator

  • ...table Fuel Tank.The model number of the generator must match the model of the fuel cap.In use, as for the users except Honda generator users, the tank should be placed at a higher position than the generator, using gravity to transport oil.Carefully rotate the fuel tank cap on the generator to prevent damage to the plastic thread on the fuel tank..
Check Stock

Fuel Pump Removal Tool, Fuel Pump Module Spanner Wrench 3/8' to 1/2' Universal Fuel Pump Lock Ring Tool, Adjustable Fuel Pump Lid Tank Cover Wrench

  • MADE OF HIGHT QUALITY STEEL:Fuel tank cover spanner adopts high quality steel forging, overall high temperature quenching treatment, high hardness, wear resistance, long life, easy to use..
  • APPLICATION: Fuel pump cover spanner is used for vehicle removal and installation of fuel pump retaining rings that attach the fuel pump module to the fuel tank. Fuel pump module spanner wrench fits most plastic retaining rings. Compatible with vehicles equipped with silent fuel tank lids..
  • GENERAL MODELS: Suitable for Mercedes-benz, for BMW,for Audi,for Volkswagen,for Toyota,for Honda,for Nissan,for Citroen and other vehicles with plastic fuel pump lock ring..
  • ADJUSTABLE: The fuel pump lid tank cover wrench fits different fuel tank lids and can be adjusted from 3/8" to 1/2" (38mm to 168mm) ratchet drive..
  • DESIGN FEATURES: The curved foot design is more suitable for the installation surface of the oil pump cover to ensure that it is not easy to slip off during operation. The four sides are rounded, and the two hands are respectively held at both ends of the beam to twist the remover, so that it is not easy to hurt the hands when operating with both hands..
Check Stock

Arctic Cat 2001-2002 Carb Keihin Cvk 34 0470-449 New Oem

  • This product can replace the clumsy fuel tank breathing hose, contains an internal float, and can be used as a one-way valve. Air can enter the fuel tank while preventing gas and smoke from escaping..
  • beautiful appearance, convenient and simple to use..
  • This product can protect your air tank from being filled with dust, debris and debris when using off-road motorcycles under normal circumstances, and can prevent air from entering..
  • Function: Fuel cap and fuel tank vent pipe hose is suitable for off-road motorcycle ATV, all factories XR, CRF..
Check Stock

Plastic Gas Fuel Tank Fourtrax Red With Petcock Fit For Honda Trx300 Trx 300 1993-2000

  • Replaces Metal tank with Rust-Free Plastic.
  • Includes Gas Cap ,petcock,fuel Filter ,Gas Tank Vent Hose and Fuel Line.
  • This is an aftermarket tank, The appearance may be a little different from the original fuel tank, the installation should be adjusted appropriately..
  • For HONDA TRX300 1993-2000 TRX 300 4X4 AND 2X4.
Check Stock

FVRITO Gas Fuel Petrol Tank for 2 Stroke 47cc 49cc Chinese Kids Mini Atv Quad 4 Wheeler Bike Pocket Bike plastic

  • 【ABS plastic material】Made of Durable hard ABS plastic panel material, good sealing, do not worry about the oil leakage from the fuel tank.
  • 【Fitment】 Fits lots of Chinese 2 Stroke 47cc 49cc Chinese Kids Mini Atv Quad 4 Wheeler.
  • 【Size】 Length of the Tank: 230 mm / 10.83 inches, Width of the Tank: 126 mm / 6.96 inches, height of the Tank: 73 mm / 2.87 inches..
  • 【Package Contents:】1 x Gas Tank,1 X Gas Tank Cap went breath Cap,1 x fuel filter,1 x fuel line,4 x clips.
  • 【Note】 Please check it carefully to ensure fitment before purchase..
Check Stock

LPHUMEX Fuel Pump Removal Tool - Fuel Pump Lock Ring Tool, Fuel Tank Repair Kit, Fuel Tank Lid Cover Remove Spanner, 3/8' to 1/2' Adjustable Lock Ring Spanner

  • Universal: This Fuel Pump Module Spanner Wrench fits most plastic retaining rings, Compatible with all vehicles that have silent fuel tank lid, adjustable from 3/8" to 1/2" (38mm to 168mm) ratchet drives..
  • Applications: Suitable for vehicles to remove and install the fuel pump retaining ring that holds the fuel pump module on the gas tank..
  • Easy Handle: Anyone who needs to remove a ring nut to change out or install a fuel pump, replace fuel sending unit, change the fuel filter etc. MUST have this wrench!! Gets the job done quickly!! Zero damage to the plastic ring nut with this wrench and it's totally adjustable to fit whatever size ring nut possible!!.
  • Work with: All that is needed is a 12mm wrench to set the width of the arms and a 3/8" drive ratchet with extension. Perfect though. Way better then a screw driver and hammer (that didn't work).Make sure you tighten the two small bolts before use. The wrench easily engages in the ridges around a threaded locking collar that secures the fuel pump to the top of the tank..
  • You can use on all kind of vehicle with slient fuel tank lid..
Check Stock

LAFEINA 2 PCS 1/10 Scale RC Crawler Accessory Mini Fuel Tank for 1:10 RC Rock Crawler Truck Tamiya D90 Axial Wraith SCX10

  • Fuel Tank for 1/10 scale RC4WD Tamiya SCX10 Axial RedCat Rock Crawler.
  • This scale fuel tank is not used to store fuel oil, only for 1/10 RC rock crawler decoration..
  • Package include: 2 X 1/10 RC Rock Crawler Fuel Tank, 2 X Fuel Tank Mount.
Check Stock

ROMASO Motorcycle Gas Fuel Tank 3D Decals,Powersports Gas Tank Protectors,Anti-Scratch Traction Pads,Black(Pack of 2)

  • MATERIAL- Made of high quality carbon fiber & plastic material,waterproof, non-yellowing..
  • APPLICATION - It is suitable for most motorcycle fuel tanks. Please measure your fuel tank size to match the size of our sticker before purchasing..
  • EASY TO INSTALL: Self-adhesive backing.But pay attention: your fuel tank is clean and dry before pasting.
  • make sure your fuel tank has not been waxed in the last week,otherwise it caused the sticker unstable..
  • GAS TANK PROTECTORS - Protects long-term the tank from scratches and abrasions of various kinds..
  • PACKAGE INCLUDES - 2PCS Motorcycle Gas Tank Decals..
Check Stock

240-33 ohms 4' (100mm) Fuel Tank Sending Unit for Marine Boat Truck Car Fuel Sending Unit Marine Fuel Gauge Sending Unit Truck Gas Tank Fuel Sender Fuel Water Level Sensor

  • ... can let the fuel gauge work again, the red wire is positive and the blue wire is negative.
  • Please Note: In order to keep the fuel water level sensor from touching the bottom of the tank, if the tank is made of metal, the length of the sensor should be 0.5 inch less than the depth of the tank. If the tank is made of plastic, the length of the sensor should be 1inch less than the depth of the tank.
Check Stock

DIYTuning 2 Gallon Off Road SUV ATV Spare Water Container Built-in Oil Pipe Motorcycles Fuel Tank Gasoline Pack Red (2 Pcs)

  • High Quality 2 Gallon / 7.5L Backup Gas Fuel Tank..
  • Material: The fuel container is made of density polyethylene plastic material, anti-corrosion, anti-static and anti-ultraviolet. It can ensure that the fuel will not ignite spontaneously in the fuel tank to avoid explosion..
  • Features: The fuel container has a refueling nozzle inserted into the oil tank mouth for easy use..
  • Widely Application: The fuel container can be used for motorcycles, off-road vehicles, UTV, ATV, when the fuel is insufficient, the spare fuel in the container can be used to supplement..
  • Adavantage: Our fuel containers can be combined be together, which can save more space for you..
Check Stock

AlveyTech Black Plastic Fuel Tank with Petcock Valve for 90cc to 150cc ATVs

  • Not just the tank! Includes petcock shut-off fuel valve and gas cap..
  • You can replace an old and beat up or damages gas tank with this black plastic fuel tank for 90cc to 150cc ATVs..
  • A very good value for the money, this fuel tank makes a good gas holder on many custom projects..
  • This handy and useful tank may also be compatible with many other Chinese made gas-powered dirt bikes, ATVs, as well as some small 4-stroke engine generators..
Check Stock

Outboard External Fuel Tank, 3 Gallons Rectangular Marine Fuel Tank Portable Marine Boat Fuel Tank Boat Engine Fuel Tank

  • 【Wide Applications】- It's perfect for Small to Large Boats, Inflatables, Tinnies, Canoes and even Kayaks. Adapter 6 horsepower outboard engine models can be used for a variety of models of outboard machine. The fuel tank with fuel to ensure clean fuel, traveling thousands of miles worries..
  • 【Main Parameters】- Item Type: Outboard External Fuel Tank.
  • Suitable for petrol: Leaded or Unleaded..
  • 【Premium Material】- This Outboard Fuel tank is made from strong stabilised plastic (polyethylene), durable, high density, anti-static, anti-aging, corrosion-resistant. It's light wieght compact and has a convient carry handle..
  • 【Attention】- Only a fuel tank with connector on the tank(as you can see on the pics).
  • There is no tubing or the connector for the boat engine!!!.
  • 【100% Customer Guarantee】- Our products are shipped from US warehouses, we will ship your order asap through logistics such as UPS/USPS/FedEx. If you have any problems, please feel free to contact us. We will try our best to solve your problem..
Check Stock

BJTDLLX Boat Fuel Tank, 24L 6Gallon Gas Can Marine Outboard Motor Fuel Tank, Portable 6gal Boat Gas Tank Fueling Tank Plastic Tank Outboard Motor Boat Accessories for 2-4Stroke Outboard Engine

  • 【High Quality Material】Our marine fuel tank is made of high density plastic (polyethylene) material, which has the characteristics of impact resistance, corrosion resistance, acid resistance and so on. It springs back naturally without permanent deformation. In addition, there will be no electric sparks to cause explosions during friction and impact..
  • 【Portable Design】 The three-dimensional textured surface of the 24L/6Gallon marine fuel tank not only increases the aesthetics of the gas tank, but also optimizes the grip feel, so that the force is even and the feel is not restricted. Equipped with an I-shaped handle, which is more ergonomic, convenient and fast, easy to carry and store..
  • 【Fuel Gauge】The fuel gauge allows you to clearly see the change of the fuel tank and the remaining oil level, and replenish it in time. The integrated design of the fuel tank cover and the intake valve makes it more convenient to use. The air inlet and oil outlet are separated to prevent oil from overflowing. Moreover, the pure copper interface process is more complete and the service life is longer..
Check Stock