Categories

Best Plastic Milling Machine

QWORK Chucking Reamer Set, 8 Pcs HHS H8 Straight Shank Machine Chucking Reamer Milling Cutter, 3/4/5/6/7/8/9/10mm

  • ⭐The reamer set are made of high speed steel, high hardness and good toughness, long service life..
  • ⭐With sharp cutting-edge, the chucking machine reamer set have high cutting ability, high accuracy and clean cutting..
  • ⭐This HSS H8 reamer set can process surface of iron, steel, plastic, wood, copper, aluminum and other metal materials..
  • ⭐The straight shank milling cutter tool set are widely used for bore machining, reaming to mould processing and handicraft processing, installed in drilling machine, milling machine, etc.
Check Stock

Milling Bronze Gear,Power Feed Bronze Gear Bridgeport for Bridgeport Milling Machine

  • ... power feed adopts Gleason Spiral Bevel Gear with advantages of stable transmission ratio,low transmission noise,high transmission efficiency and high bearing capacity.And when fast transmission, if the tool collides with the workpiece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage..
  • 【AUTOMATIC AND MANUAL CONTROL】You can set this power feed to work at automatic constant speed to free your hands or work by manually adjusting the speed control knob to do more precise milling work.And this multifunctional milling machine power feed can work with excellent speed control in the entire range according to your needs..
  • 【WIDE APPLICATION】This milling table power feed fits some vertical knee type mills with the same mounting pattern and a 5/8" diameter shaft on the end,But it will NOT fit mills with a different mounting pattern or different sized leadscrews like powermatic and some other odd sized machines, so please make sure yours is the typical Bridgeport type as mentioned above.NOTE:Any shipping damage,using problems or missing accessories, please feel free to cantact us, we will solve them for you..
Check Stock

uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs

  • 【High working efficiency】: This chucking machine reamer set has sharp cutting-edge, high efficiency cutting ability, high accuracy, so your work will become easier under the use of this tools set. Also, this set has a long-term using service life.
  • 【High quality materials】: This set of cutter milling reamer is made of high quality and high speed steel materials, so these reamer cutters have high hardness.
  • 【Specific and professional use】: This steel milling cutting tool set is designed for reaming to mold processing and handicraft processing.
  • 【Wide using range】: This whole chucking reamer set can be widely used for bore machining, installed in drilling machine, milling machine, etc.
  • 【Fine process】: This set of chucking reamer tools' surface has processed by iron, plastic, wood, copper, aluminum and other soft materials.
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

uxcell 4-inch Diameter Plastic Round Hand Wheel W Revolving Handle

  • 【Excellent Material】- The lathe milling hand wheel is made of high quality plastic, modern-design, strong insulation and durable in use..
  • 【Standard Size】- These hand wheels are bored to the standard shaft diameter for their size, and are also tapped for a removable handle..
  • 【Easy to Use】- The hand wheel comes with screw hole for easy handle assembly. Hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism..
  • 【Mainly Used】- These hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism..
  • 【Wide Application】- The control hand wheels is widely used in industrial machine tools, such as milling machine, lathes, grinders etc..
Check Stock

YXQ 4.9 inch 2 Spoke Hand Wheel with Folding Revolving Handle Black for Milling Machine, 12mm Center Bore Diameter

  • ▶HIGH-QUALITY MATERIALS: The lathe milling hand wheel is made of high quality plastic, modern-design, strong insulation and durable in use..
  • ▶DESIGN STANDARDIZATION: These hand wheels are bored to the standard shaft diameter for their size, and are also tapped for a removable handle..
  • ▶SIMPLE ASSEMBLY: The round handwheel come with revolving handle, hand wheel has threaded hole for easy handle assembly.
  • ▶WIDELY USED: It is widely used in industrial machine tools, such as milling machine, lathes, grinders etc..
  • ▶APPLICATION: Hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism..
Check Stock

Hand Wheel, Plastic Lathe Hand Wheel, 1 pcs Black Lathe Milling Machine Rear Ripple Hand Wheel with Revolving Handle(10 * 63mm)

  • ◇【High Quality】- The lathe milling hand wheel is made of high quality plastic, modern-design, strong insulation and durable in use..
  • ◇【Standard Size】- These hand wheels are bored to the standard shaft diameter for their size, and are also tapped for a removable handle..
  • ◇【Easy to Install】- The hand wheel comes with screw hole for easy handle assembly..
  • ◇【User's Guidance】- Hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism..
  • ◇【Widely Application】- It is widely used in industrial machine tools, such as milling machine, lathes, grinders etc..
Check Stock

YXQ 10mm Hole 80mm Diameter Ripple Hand Wheel Black with Revolving Handle for Grinder Machines

  • 【Excellent Material】- The lathe milling hand wheel is made of high quality plastic, modern-design, strong insulation and durable in use..
  • 【Standard Size】- These hand wheels are bored to the standard shaft diameter for their size, and are also tapped for a removable handle..
  • 【Easy to Use】- The hand wheel comes with screw hole for easy handle assembly. Hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism..
  • 【Mainly Used】- These hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism..
  • 【Wide Application】- The control hand wheels is widely used in industrial machine tools, such as milling machine, lathes, grinders etc..
Check Stock

Milling on the Drill Press (DVD, 4 Hours)

  • 【Much More Powerful】The motor power of RCOG-25V milling drilling machine has a 1100W brushless spindle drive motor providing tremendous torque and variable speeds from 50-22250 RPM continuously, with overload and overheating protection fuction.The noise of this motor is very low and it is very easy to maintain.So much power will make your work much more efficient..
  • 【Parameters】Metric Scale MT3 Milling Machine adopts high precision grinding all steel spindle with excellent strength grinding gear,X axis:18.9",Y axis:6.9",Z axis:11",it has own DRO for 3 axis.Headstock swivels 360 degrees.Max drilling diameter:0.9",Max Face screening capacity:2.5",Max vertical milling capacity:0.79",Distance from spindle to table:13.8",Spindle taper:MT3,Table size:27.5"x7.1".The speed display shows inch..
  • 【Micro-Feed Precision】Benchtop Milling Drilling Machine has a micro-feed function,the accuracy is up to 0.01'', only need to tighten the middle nut of the right hand wheel to achieve the micro-feed function, loosen the nut to achieve the manual up and down movement function.Integrated cross worktable,width is widened,with high pr....
Check Stock

Milling Cutter, 3.175x2x17mm Straight Shank Engraving Good Durability Spiral Milling Cutter Tungsten Steel Milling Cutter Milling Cutter Single for Repair Tool

  • Made of tungsten steel material, with high hardness and strength, wear resistance and corrosion resistance..
  • The milling cutter is a single‑flute spiral milling cutter with fast processing speed and good chip removal effect..
  • The blade adopts mirror grinding technology, the appearance is not rough, and the milling is glossy..
  • The milling cutter is mainly used for plane milling, notch milling, step face milling and profiling milling..
  • The kit contains 5 spiral milling cutters, with standard size, often used in CNC engraving machine..
Check Stock

LGXEnzhuo Manually Operated HDPE Butt Fusion Welding Machine 4 Clamps Pipe Fusion Welder Manual PE PP PB PVDF Pipe Hot Melt Machine 110V 63-160mm

  • ... 【PARAMETER】Model No.:2.48"-6.30" (63-160mm) 4 clamps.
  • Welding level(Φ, mm)outer dia: 2.48" (63mm), 2.95" (75mm), 3.54" (90mm), 4.33" (110mm), 4.92" (125mm), 5.51" (140mm), 6.30" (160mm).
  • 【FEATURES】Features of manual hot melt butt welding machine: It consists of four parts: frame, milling cutter, independent heating plate, milling cutter and heating plate bracket.
  • 【HIGH QUALITY】The heating plate adopts an independent temperature control system and is coated with PTFE.
  • The main part of the frame is made of aluminum alloy material, which is simple in structure, compact and easy to use.
  • 【EASY TO USE】Electric milling method is adopted, with single and double-sided milling functions.
  • the milling inserts are made of high-quality tool steel, double-edged design, and can be used on both sides.
Check Stock

LANTRO JS D26 Milling Machine Ball Table Handle 3 Ball Crank Handle for Bridgeport Milling Machine

  • △Parameters:Weight: Approx. 784g / 27.7oz, Whole Length: Approx. 197mm / 7.8in, Inner Hole Diameter: Approx. 16mm / 0.6in, Keyway Width: Approx. 3mm / 0.1in, Inner Cylinder Width: Approx. 1.1in.
  • △Perfect Replacement:Three ball crank table handle for milling machine using, suitable for most milling machines and work benches.
  • △Comfortable Grip:The olive-shaped hand-held part of the three ball crank of the milling machine is ergonomically designed for comfortable grip and reduced work load.
  • △Premuim Quality:Made of high hardness material, durable to use. The surface of the three-ball crank of the milling machine has been carefully polished, with high gloss and beautiful appearance, eliminating burrs and safe use.
  • △Easy Installation:Ball Crank Table Handle is safe and convenient to replace the handle.
Check Stock

10PCS SEHT 43 AFSN Carbide Insert Face Mill SEHT1204 X83 H01 Lathe Milling CNC Tools Milling Cutter Suitable for Processing Aluminum Alloy.

  • Vertical & Horizontal: Our rotary table for milling machine is 6"/150mm with 4 slot can be used in both horizontal and vertical positions, meeting two functions and also bringing you convenient as well as efficient milling experience..
  • Remarkable Quality: Cast iron mainly used to cast parts subjected to pressure and vibration on mechanical equipment, offering rotary table for milling durability, shock absorption and heat-resistantance..
  • Excellent Precision: The precision rotary table indexing plate can be graduated 360 Degrees. Resetting dial and hand wheel can be graduated in seconds..
  • Convenient To Adjust: The dial is marked with an accurate scale. Just operate the control handle and adjust it to the desired position, which makes it possible to use it easily and conveniently..
  • Multiple Application: With a set of wrench and set of screws, the power milling machines are widely used in milling machine like index boring, milling, circle cutting, spot facing and boring hole and so on. Practical design can meet a variety of workshop work needs..
Check Stock