Large DIY Pyramid Resin Mold Set Big Silicone Pyramid Molds Jewelry Making Craft Mould Tool 15cm/5.9 2 x Inner Silicone Molds 1 x Outter Shell

  • High-quality silicone, safety, high Flexible, full transparency, Super easy to de-mold.
  • Fill the entire mold about 1200 grams of resin, You Can Make Any Size Below 15.7cm artworks.
  • Be careful to place the Silicone mold insert into the plastic shell accurately, Make sure all sides flush. Pour alcohol into the outer shell make it....
  • The mold is used to create the fantastic pyramid-shaped artwork, Mold is reusable.
  • The inner silicone molds has a service life, and the outer shell will not be lost. An additional inner silicone molds is a more economical solution.
Check Stock

iplusmile Knurled Nut, M3 Threaded Inserts M3 Thread Copper Knurled Nuts Heat Set Insert for Printing 3D Printer and More Projects (100pcs, 3x4.6x5.7mm)

  • M3 THREAD INSERT SIZE - 3mm x 4.6mm x 5.7mm (inside diameter x outside diameter x height). We use professional processing equipment and uniform mold production to ensure that the size error is controlled within the range of 0.01mm..
  • COPPER MATERIAL - These knurled threaded insert embedment nuts are made of durable copper. Female thread knurled nuts are suitable for mounting into tapered holes by heating or for molding during injection molding..
  • COMPLETE THREAD - M3 threaded insert nuts are all made according to standards, with clear and deep threads, small tolerances, standard round shapes, so threaded insert are easy to install..
  • GOOD WORKMANSHIP - Surface of the M3 brass insert nut is clean and free of burrs and will not harm other parts such as 3D printer, plastic or wood..
  • WIDELY APPLICATION - M3 heat set inserts are widely applied in laptop plastic housings, 3D printers, automotive,electrical injection molding, and all kinds of plastic casings. ✭✭✭(If you have any questions about our products, please feel free to contact us. We will try our best to solve all your problems until you are satisfied.)✭✭✭.
Check Stock

Large Pyramid Mold 5.9″, Buytra Silicone Mold for Resin, Resin Casting Mold, Clear Epoxy Resin Molds for DIY Orgonite Pyramid, Jewelry Making, Crafting, Home Decoration or Gift

  • PACKAGE CONTENT – comes with an inserted pyramid resin mold and a frame.
  • insert resin jewerly mold is silicone made, and the frame is plastic material, durable and reusable.
  • LARGE RESIN MOLDS- the pyramid resin casting mold measures approx 5.9 * 6.5″(W*H), and the outer frame is approx 6.1 * 6.5″(W*H).
  • please allow slight manual measuring error, thanks for your understanding.
  • YOU CAN MAKE VARIOUS SIZES OF ORGONITE PYRAMID – the resin mold set allow for doing them in a wide variety of sizes smaller than 15cm/5.90″ as your needs, flexible to use.
  • MULTIPURPOSE – the clear casting resin mold is very versatile in its usage! Perfect for resin jewelry making, crafts projects, home decoration or diy birthday gifts.
  • can be used as resin, cabochon, polymer clay, gum paste, pmc, wax, candle, soap mold etc.
  • TIPS FOR USING – If using resin, first put a film of Vasoline inside the mold, then after the resin is poured in, allow it to sit in the hot sun for 24 hours (or more) before flipping and removing the finished product. If you try to remove too quickly, you’ll end up with a mess probably.
Check Stock

Tovolo Twin Popsicle Molds with Sticks Ice Pop Maker BPA Free Food Safe Dishwasher Safe Great for Homemade Juice Popsicles! Set of 4 makes 8 Pops with Stand!, Blue

  • CREATE HOMEMADE ICE POPS: These twin ice pop molds create the classic shape that call to mind warm summer afternoons and sharing a frozen treat with a friend. Simply pour the mixture into the molds, freeze, and share the best afternoon snack ever..
  • UNIQUE DRIP-GUARD HANDLE: Reduce sticky hands with unique drip-guard handles. The base creates a small bowl around the center stick, collecting drips from melting ice pops. The drip-guard snaps over the plastic mold while freezing to contain spills..
  • BASE HOLDS POP UPRIGHT WHILE FREEZING: Plastic molds fit securely into inserts in the base to keep the pops upright as they freeze. Sturdy base does not wobble or tip in the freezer, ensuring minimal disruption during freezing time..
  • MAKE A VARIETY OF FROZEN TREATS: Mix and match your favorite flavors for unique treats. Gently insert the reusable sticks into the liquid, and freeze until solid. Each mold holds 4 fluid ounces. Run the mold under warm water before enjoying..
  • DIMENSIONS & CARE: 7" L X 4.75" W X 7" H.
  • dishwasher-safe for easy cleaning. Made of BPA-free plastic..
Check Stock

Dyna-Living Moon Cake Mould 10pcs 100g Moon Cake Mooncake Mold Set Hand Press DIY Moon Cake Maker Cookie Stamps Pastry Tool

  • ...h 10 floral stamps, all of them with clear embossing patterns that can be used to make DIY moon cake, cookies or creative cakes. This moon cake mould makes 100g/3.52oz exquisite moon cakes..
  • ☸[Food Grade Materials]- The moon cake mooncake molder is made of ABS food-grade plastic materials, which are non-toxic and tasteless, safe and healthy. The moon cake mold is durable and has a long service life..
  • ☸[Adjustable Thickness]- Moon cake mooncake molds, the adjustable thickness of biscuit stamps, you can adjust the height of the moon cake mould by turning the knob on the handle to make different sizes of cookies, shortbread cookies or mooncakes..
  • ☸[Easy to Use]- The mooncake mold moon cake cutter maker is easy to use, just insert a cookie stamp into the mold (The pattern side face outward), gently press down the moon cake molder and make them into a cute shape. removable moon cake mold cookie cutter set is easy to release and clean, clean and hygienic..
  • ☸[Wide Use Range]- The moon cake molder cookie stamps pastry press for baking is suitable for making Chinese moon cakes, cook....
Check Stock

Tovolo Groovy, Drip-Guard Handle 4 Ounce, Set of 6 Ice Pop Molds, Popsicle Makers with Reusable Sticks, Mess-Free Frozen Treats, Blueberry

  • ...e mixture into the molds and freeze for the easiest, grooviest afternoon snack ever..
  • UNIQUE DRIP-GUARD HANDLE: Reduce sticky hands and lost juice with these unique drip-guard handles. The base creates a small bowl around the center stick, which collects any drips from melting ice pops. The drip-guard snaps over the plastic mold while freezing, so the ice pop is always contained within the bowl for a mess-free frozen treat..
  • BASE HOLDS POP UPRIGHT WHILE FREEZING: Sturdy base does not wobble or tip in the freezer, ensuring minimal disruption during freezing time. Plastic molds fit securely into inserts in the base to keep the pops upright as they freeze. Once frozen, individual molds can be removed from the base to make it easier to pull the frozen ice pop out of the mold. Run the mold under warm water for easier release..
  • MAKE A VARIETY OF FROZEN TREATS: Mix and match your favorite fruit juices, yogurt, pureed fruits and vegetables, leftover smoothies, ice cream, and more for unique treats every time. Mix up your favorite flavor combinations then pour the liquid into the molds, set in the base. Once filled, gently insert the sticks into the liquid, and freeze until solid. Each mold holds 4 fluid ounces..
  • DIMENSIONS & CARE: 6.75" L X 6.25" W X 7.75" H.
Check Stock

Tupperware 6 Cup Jello Jel Ring Dessert Mold Sheer and Aqua Blue

  • 3 Piece jel-ring holds about 6 cups, consists of sheer jel-ring, aqua fluted insert, and aqua main seal.
  • measures 9 inches diameter across the seal.
  • Includes 6 cup mold, fluted insert, and virtually airtight, liquid-tight seal.
  • Sheer mold with aqua blue insert and seal.
Check Stock

Jel-Ring Jello Mold Holiday, Small 2 1/2 Cups Purple

  • Tupperware 4 piece SMALL Jel Ring Jello Dessert Mold.
  • Mold measures approximately 6 1/4 inches diameter by 2 1/4 inches hign.
  • Includes ring mold, fluted insert, under plate, and decorative top seal.
Check Stock

Cake Pop Maker Set, 12-Hole Silicone Cake Pop Mold with Lollipop Sticks, 15-Hole Acrylic Lollipop Holder, Measuring Cup, Decorating Pen, 4 Piping Tips, Flat Pockets, Twist Ties

  • Large quantity: this set of baking supplies is composed of 2 pieces acrylic 15 holes lollipop stand, 100 pieces white plastic lollipop hollow sticks, 2 pieces 12-hole silicone lollipop molds (colors of red and orange are random), 800 pieces twist ties, 100 pieces lollipop clear pockets, 250 ml silicone measuring cup and decorating pen, 4 pieces piping tips.
  • All of them keep up with increasing demands.
  • Enjoy DIY fun: cake decorating pen with 4 tips can be applied to make various patterns you like to decorate cupcakes, breads, lollipops, etc..
  • You can use a 250ml silicone measuring cup to get the required amount of water and flour for better baking.
  • Creat delicious snack: you can use 12-hole silicone mold to make lollipops, chocolates and insert plastic sticks into them, then display your finished products on the acrylic stand or wrap them with flat pocket and golden twist tie.
  • You will receive many compliments on beautiful snack decoration.
  • Reliable quality: the clear lollipop holder with smooth and shiny surface, which is reusable, hard to deform and easy to clean with water or wipe with paper towel.
  • Silicone baking mold has strong toughness and can be applied repeatedly and withstand temperature range from -40 to 440 degrees Fahrenheit (0-230 degrees C....
Check Stock

Tupperware JEL RING MOLD Jello Desserts 2.5 Cup Lavender Purple

  • Tupperware JEL RING MOLD Jello Desserts 2.5 cup Lavender Purple.
  • 4-piece set includes ring mold, 2 top molds and lid that doubles as serving dish.
  • Sheer Mold and Fluted Insert with Lavender Purple Decorative Seal and Base Plate.
  • Small size – measures approximately 6 3/4″ diameter x 3″ high.
Check Stock

Ice Ball Maker Molds, Round Ice Cube Tray, Sphere Whiskey Ice Mold - 2.5 Inch Round Ice Cube Mold - Large Ice Ball Molds for Whiskey, Cocktails, Bourbon and Coffee - Colorful Creative Gift - 4 Pack

  • 【SAFE FOOD-GRADE MATERIALS】 The ice ball mold is made of food-grade silicone and AS plastic. It’s BPA Free, hygienic, non-toxic and odorless. Both the silicone and AS material provide superb airtightness which keeps the ice sphere mold from separating when filled with water, giving you a perfectly sphere shaped..
  • 【LARGE ICE BALL SIZE】These ice ball molds creates 2.5'' large round ice cubes. Large ice balls melt slower than regular smaller ice cubes. That way your whiskey and drinks won’t get easily watered down. It helps with keeping your drinking experience refreshing for a longer period of time..
  • 【EASY RELEASE】 The assembly design makes the release easier than traditional ice cube tray. The bottom part of the ice mold is made of soft silicone. Just squeeze the silicone bottom to easily release the ice ball. Let it sit for 1 minute to make it even easier to be released from the mold!.
  • 【EASY-FILL DESIGN】 The sphere ice mold can be separated in the middle which accelerates the water filling process. After opening, you’ll be able to insert your favorite ingredients like vanilla, lemon, mint or any other ....
Check Stock

ecozoi Stainless Steel Popsicle Molds and Rack - 6 Square Ice Pop Makers + 30 Reusable Bamboo Sticks + 12 Silicone Seals + 1 Cleaning Brush +1 Rack

  • ECO-FRIENDLY DESIGN: This product is designed as an eco-friendly alternative to Plastic Popsicle Molds. Designed and tested by team of....
  • PLASTIC FREE: The materials used include food grade 304 Stainless Steel for the molds and the rack, Bamboo for the sticks, Silicone for the rings, and....
  • ADDITIONAL FEATURES: BPA Free, PVC Free, Phthalate Free, Leaching Free, and Lower Carbon Footprint than Plastic. Stainless Steel material helps freeze....
  • BONUS MATERIALS: For those who crave for yummy ice cream bars or ice pops, our online blog contains several tasty recipes with step by step....
  • EASY TO USE & CLEAN: Select ingredients, mix them together, pour into mold, insert stick, and freeze. Create your own custom homemade frozen yogurt....
Check Stock

Mini Pretty Lady Design 3D Silicone Mold for Handcrafted Candle Decorated Candle Wax Melt Molds Epoxy Resin Aroma Gypsum Silicone Mould Concrete Statue Molds

  • Material of mold : food grade silicone rubber ,color:blue.
  • Feature of mold: food grade,non-toxic,odorless, no shrinkage,no deformation,easy demold,soft & flexible..
  • Application of mold : for making soap,candle ,cake,chocolate,wax,gypsum resin clay crafts..
  • Note 1: this is Mini Lady Craft,it is not big, pls check the size carefully before paid,Note 2: this mold is 3D mold , we already cut the mold for easy demolding,you need to use tape to combine the mold before pour wax,pls check our picture and consider this issue before paid.Note 3: because not all client use the mold to make candle,so we don't make hole for insert candle wick ,pls make hole by yourself if you make candle , pls also consider this issue before paid..
Check Stock