Categories

Best Plastic Pool Ladder

Easy Step Pool Entry System with Gate

  • Fits both in-ground and above-ground pool ladders with poles that are 1.9 inches in diameter.
  • Made from high-quality, molded polypropylene plastic, can hold up to 300 pounds of weight and can withstand direct exposure to sunlight and pool chemicals. Easy to install and maintain.
  • The pebble-textured tread is relatively deep, made of the same heavy-duty plastic, easy to clean, and not painful to step on. Prevent slips, skids, and injury.
  • Bolts (part number 87907) are the exact part replacement for the 87901 swimming pool ladder rung.
  • Included 6 ladder bolts, 6 nuts - the exact number needed for a 3-rung ladder. The bolt's full length is approximately 2.94"with a 1.22" threaded part and a head diameter of 0.62".
Check Stock

Bestway 58337 A-Frame Above Ground Pool Ladder 52"

  • EASY ACCESS TO AND FROM POOL: With double-sided steps, this ladder allows a swimmer to go into or come out of a pool simply and safely..
  • MADE FOR WET FEET: Heavy-duty, slip-resistant plastic steps were designed for drenched feet to keep you and your child from falling..
  • ONE LADDER FOR MANY SUMMERS: This A-frame pool ladder’s frame is made from durable, galvanized, and rust-resistant metal..
  • SUITABLE FOR ABOVE GROUND POOLS: This ladder is appropriate for inflatable pools or above ground pools with wall heights of 52″ (4 feet, 4 inches) or lower..
Check Stock

Aqua Select Three Tread Stainless Steel Pool Ladder | Entry and Exit System for In-Ground Swimming Pools | 250 Pound Capacity | 1.90-Inch Outer Diameter | with Non-Slip Plastic White Steps

  • OUT WITH THE OLD IN WITH THE NEW - Enter and exit your pool without a hassle. This is the perfect ladder to replace your old inground pool ladder. Anchors and escutcheons sold separately..
  • EASY INSTALLATION – Just remove your old inground pool ladder and insert this new one. No bonding or grounding required..
  • STAINLESS STEEL - 20" wide electro-polished aluminum rails and 3 white plastic steps with ends flared to 1.90" outside diameter for easy replacement in existing pools..
  • CLOSE FOR COMFORT - All bends have a 6-Inch radius to keep the ladder closer to the pool wall..
  • INCLUDES - This stainless steel pool ladder comes with a two-pack of rubber bumpers and a 3 year warranty. If you have a salt chlorination pool, this ladder may show signs of earlier corrosion and is not recommended. It works ideally in chlorinated pools, as it is not salt water friendly. Stainless steel escutcheons plates and anchors are sold separately. * All dimensions will vary within a 1/2 inch as each piece is hand bent at the manufacturer*.
Check Stock

JSP Manufacturing New (3-Pack) fits Hydrotools 87901 Swimming Pool Molded Plastic Replacement Ladder Rung Step

  • New JSP Brand Plastic Replacement Pool Ladder Rung Step – 3 Pack.
  • Replaces Hydrotools Part Number: 87901 ~ Replace your broken, damaged or worn out pool ladder steps..
  • For most above-ground and in-ground ladders ~ Please take time and measure your step..
  • Fits 1.9-inch diameter ladder poles ~ Measures Approximately: 18” (Indent to Indent).
  • Made of a high-quality, durable plastic with anti-skid and slip-textured surface to help prevent slipping.
Check Stock

TonGass (3-Pack) 18" Universal Heavy-Duty Molded Plastic Swimming Pool Ladder Rung Step with Stainless Steel Bolts

  • Fits both in-ground and above-ground pool ladders with poles that are 1.9 inches in diameter.
  • Made from high-quality, molded polypropylene plastic, can hold up to 300 pounds of weight and can withstand direct exposure to sunlight and pool chemicals. Easy to install and maintain.
  • The pebble-textured tread is relatively deep, made of the same heavy-duty plastic, easy to clean, and not painful to step on. Prevent slips, skids, and injury.
  • Bolts (part number 87907) are the exact part replacement for the 87901 swimming pool ladder rung.
  • Included 6 ladder bolts, 6 nuts - the exact number needed for a 3-rung ladder. The bolt's full length is approximately 2.94"with a 1.22" threaded part and a head diameter of 0.62".
Check Stock

Intex 28076E Intex-48 Inch Ladder with Removable Steps Pool, 1 Size, Grey

  • FIT: Pool ladder works best on pools with a wall height below 43 inches.
  • RECOMMENDED USE: It is recommended that this ladder be used with above ground pools.
  • HEAVY-DUTY: Features durable corrosion-resistant metal frame with heavy-duty slip-resistant plastic steps.
  • QUICK SET-UP: Quick and easy assembly as the pieces quickly connect.
  • SPECIFICATIONS: Height: 43 inches (3 steps).
  • Dimensions (L x W x H): 57 x 29 x 59 inches.
Check Stock

Summer Waves 36 Inch SureStep 3 Step Heavy Duty Steel Outdoor Above Ground Swimming Pool Ladder

  • FIT: Pool ladder works best on pools with a 36-inch wall height.
  • RECOMMENDED USE: It is recommended that this ladder be used with Quick Set or Frame pools.
  • HEAVY-DUTY: Features durable corrosion-resistant metal frame with heavy duty slip-resistant plastic steps.
  • QUICK SET-UP: Quick and easy assembly as the pieces quickly connect.
  • SPECIFICATIONS: Height: 36 inches (3 steps).
Check Stock

Swimline Big Foot Foot Bath Tub - Pool Accessories 8951

  • UNIQUE- Big Foot design that will love kids love to use, perfect for rinsing feet before entering swimming pool or spa making your pool cleaner. Quality pool accessories for your home pool..
  • HOW TO USE: Place Big Foot Bath Plastic Tray at foot of your pool ladder or entry area of pool and dip your feet in the bath. Removes grass and dirt before entering the pool..
  • BUILT STRONG - Durable and long lasting, textured bottom for safety. Plastic molded foot bath perfect for above ground pools. Also a great use to soak feet, rinse feet, clean feet or for pedicures..
  • SAVE MONEY - Prolong the life of your pool filter and also help keep larger debris from pool and filters with this bath plastic pool tray . Easy and simple for storage..
  • DIMENSIONS - Measurements: 3" - 5" Deep. 14.5" Inner Width. 13" Inner Length. Will fit up to a US men’s 10 shoe size.
Check Stock

JLeisure 48 Inch 3 Step with Platform A Frame Deck Heavy Duty Metal Steel Frame Outdoor Backyard Above Ground Swimming Pool Ladder

  • LADDER FIT: Pool ladder works best on pools with a 48-inch wall height.
  • RECOMMENDED USE: It is recommended that this ladder be used with above ground pools.
  • HEAVY-DUTY: Features durable corrosion-resistant metal frame with heavy-duty slip-resistant plastic steps.
  • QUICK SET-UP: Quick and easy assembly as the pieces quickly connect.
  • SPECIFICATIONS: Height: 48 inches (3 steps).
  • Dimensions (L x W x H): 62.2 x 29.5 x 70 inches.
Check Stock

VINGLI Pool Ladder Heavy-Duty 4 Safety Step for Above Ground Pools Stair Entry System with Handrails, 33.5” x 27.2" x 77.9", 400lb, White

  • HEAVY-DUTY POOL STEPS: Using these curved swimming pool steps, you can easily get in and out of the above-ground swimming pool. These steps can support a weight of 400 pounds.
  • FOR ABOVE-GROUND POOLS: For use in flat-bottomed, above-ground swimming pools with a deck up to 60 inches. PLEASE NOTE: you need to prepare your own funnel and sand, and then pour the sand into the hole through the funnel to prevent the pool ladder from floating..
  • HIGH QUALITY MATERIAL: The swimming pool ladder is made of high-quality plastic, with handrails at the entrance. It is designed in accordance with human mechanics, and each step has anti-skid pads, so that you can keep safe when you go up and down the pool.
  • 4 EASY-TO-CLIMB STEPS: 4 steps, each measures 8.66 inches deep, 27.2 inches wide, and 9.45 inches high.
  • EXCELLENT CUSTOMER SERVICE: The VINGLI swimming pool ladder will provide your one year warranty.Please contact us if you have any question, we will give your timely and good solution..
Check Stock

Intex Steel Frame Above Ground Pool Ladder + Protective Swimming Pool Ladder Mat

  • Bundle includes the Intex Above-Ground Pool Ladder for 52-Inch Wall Height Pools with the Hydro Tools Hydrotools 87953 Ladder Mat/Step Pad.
  • Swimming pool ladder designed to make it easy to climb in and out of the pool.
  • High-impact, slip-resistant steps provide durability and a solid platform.
  • Sturdy pool ladder that will make climbing safe.
  • Ladder mat protects your pool liner from damage caused by aluminum ladder and stair bases.
Check Stock

SKARUMMER Swimming Pool Ladder Mat - Protective Pool Ladder Pad Step Mat with Non-Slip Texture, Blue Medium 36 inch X 9 inch

  • REPLACeMENT POOL LADDER PAD - This Swimming Pool Ladder Mat used as a cushion between ladder base and pool liner and protects swimming pool liner from damage caused by ladder base. The high quality Protective Pool Ladder Pad Step Mat makes you feel more at ease with it..
  • HIGH QUALITY - The size of the Protective Pool Ladder Pad Step Mat is 9 x 36 inches. And it is made of high quality rubber, which provides safety, softness, durability and flexibility..
  • NON-SLIP DESIGN - The Pool Ladder Mat with non-slip texture, provide safety in climbing the ladder stand and not easy to slip. And its back adsorption capacity is strong, not easy to move..
  • EASY TO STORE - When you're not using it, fold or roll it and put it anywhere, save much space. A variety of uses, rainy days you can be placed in the living room, kitchen and bathroom, to achieve the role of anti-skid..
  • 24-MONTH WARRANTY - Order from SKARUMMER, we offer 24 month warranty. If you have any other questions on our Swimming Pool Blue Ladder Mat Or Step Pad, please contact us at the first time, We are always here to support you. You can buy it with confidence..
Check Stock

Aqua Select Three Tread Stainless Steel Pool Ladder | Entry and Exit System for In-Ground Swimming Pools | 250 Pound Capacity | 1.90-Inch Outer Diameter | Stainless Steel Steps (Ladder)

  • EASY ENTRANCE AND EXIT - The Aqua Select 3-Step Ladder with Stainless Steel Steps is the perfect replacement for your old inground pool ladder. Enter and exit your swimming pool without a hassle. Requires stainless steel escutcheon plates that are sold separately..
  • DESIGNED FOR SAFETY - This in-ground swimming pool ladder is designed for maximum aquatic safety. Each of the three steps has textured and non-slip rubber grippings and the ladder has rounded handrails for a comfortable and safe grip to enter and exit your pool..
  • SUPERIOR QUALITY - This ladder is constructed from stainless steel for a sturdy and durable piece of equipment that will last a lifetime. This ladder has 21" wide electro-polished stainless steel ladders and steps with ends flared to 1.90" outside diameter for easy replacement in existing pools..
  • EASY INSTALLATION – Just remove your old inground pool ladder and insert this new one. No bonding or grounding required. This stainless steel ladder is ideal for chlorinated pools and is not recommended for use in salt water swimming pools that may cause corrosion..
  • TRUSTED POOL ACCESSORIES - Maintain your swimming pool or spa and surrounding living space with reliable pool accessories and replacement parts that you can trust from....
Check Stock