Categories

Best Plastic Printer

Brady BMP21-PLUS-BATTCOV Spare Battery Cover

  • For use with the BMP21-PLUS label printer.
  • Brady BMP21-PLUS combines toolbox-ready ruggedness and world class materials in an economical grab-and-go printer.
  • The yellow plastic cover snaps in place over the battery compartment.
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Black PLA PRO (PLA+) 3D Printer Filament Refill Bundle

  • A 3D Printer accessories combo - 1.75mm Black PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Refill Filament Specs: Black - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
  • Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Blue PLA PRO (PLA+) 3D Printer Filament Refill Bundle

  • A 3D Printer accessories combo - 1.75mm Blue PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Refill Filament Specs: Blue - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
  • Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Silver PLA PRO (PLA+) 3D Printer Filament Refill Bundle

  • A 3D Printer accessories combo - 1.75mm Silver PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Refill Filament Specs: Silver - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
  • Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Red PLA PRO (PLA+) 3D Printer Filament Refill Bundle

  • A 3D Printer accessories combo - 1.75mm Red PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Refill Filament Specs: Red - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
  • Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Purple PLA PRO (PLA+) 3D Printer Filament Refill Bundle

  • A 3D Printer accessories combo - 1.75mm Purple PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Refill Filament Specs: Purple - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
  • Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Yellow PLA PRO (PLA+) 3D Printer Filament Refill Bundle

  • A 3D Printer accessories combo - 1.75mm Yellow PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Refill Filament Specs: Yellow - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
  • Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

Matica MC320 Direct-to-Card Dual Sided ID Card Printer & Complete Supplies Package with Bodno Bronze Edition ID Software

  • MATICA MC320 ID CARD PRINTER prints high-definition plastic (PVC) ID cards and professional badges for government issued ID cards, employees,....
  • COMPLETE PACKAGE includes everything you need to start printing – Matica MC320 dual-sided printer, chromXpert YMCKO MC320 Color Ribbon (BD32100 -....
  • DIRECT-TO-CARD PRINTING The Matica MC320 direct-to-card printer offers a superior print quality and a complete line of encoding, lamination and....
  • PRINTER SPECS Card hopper capacity - Input 100 cards/Output 30 cards. Print speed - Full Color 20 seconds per card, Black 6 seconds per card. Printer....
  • WARRANTY & SUPPORT 3-year warranty included for the printer hardware. Lifetime support for Bodno's software - we're ALWAYS here to help you with any....
Check Stock

HUANUO Under Desk Printer Stand, 2 Tier Printer Cart for Storage, Mobile Printer Table with Swivel Wheels, Holds up to 100lbs, Perfect Desk Organizer Shelf for Home & Office, HNPS02

  • VERSATILE STAND: This multipurpose 2-tier printer table can be used as an under desk printer stand, book shelf, snack storage stand, or office organizer. Excellent solution for home and office storage. Assembled cart measures 16.3” wide, 16.3” tall, 12.2” deep.
  • ORGANIZE YOUR SPACE: This 2-tier printer stand can easily store your printer, paper, extra toner, and other supplies. The printer cart fits neatly under most desks and helps reduce clutter to free up more office space..
  • EASY TO MOVE: 360° swivel casters allow the printer cart to roll smoothly around the office, conference room, kitchen, living room, and other spaces. 2 wheels feature a locking brake to keep the printer stand stationary when needed..
  • STRONG AND DURABLE: The steel frame of the printer stand with storage provides exceptional stability. The durable laminate top is sturdy to support your printer or other office equipment. Weight capacity: 100 lbs (50 lbs for each shelf)..
  • EASY TO ASSEMBLE: To assemble the printer stand, simply screw on the caster wheels and attach the plastic clips to the grooves on the poles. Then slide the wire shelf onto the metal poles. Repeat steps for top shelf. Includes wrench for installation..
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm True Red PLA PRO (PLA+) 3D Printer Filament Refill Bundle

  • A 3D Printer accessories combo - 1.75mm True Red PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Refill Filament Specs: True Red - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
  • Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

1 Piece Portable Mini Pocket Label Printer with 5 Roll Label Papers Suitable for Clothing Supermarket Retail

  • The size of the pocket printer: about 132x76×29mm.
  • HD mini label machine, mobile phone editing, download small label printing, select template.
  • Small label printer, handheld and portable, long battery life, mobile phone editing, rich material.
  • Small and lightweight body, easy to take it anywhere. The best gift for students, office workers, lovers, friends, family..
Check Stock

TIKTONER 127T1 Handheld Inkjet Printer 4.3 Inch Touch Screen Quick-Drying Ink Cartridge Inkjet Coding Portable Handheld Printer for Barcode Batch Number Code Date Label Logo QRCode (25 Languages)

  • ...ble Handheld Printer Gun can meet the needs of various printing jobs, such as text, numbers, symbols, serial number,QR codes, barcodes, pictures, time,label, date, DIY logos, tags,expiry date, which can be printed on a variety of materials including Wood, Carton, Stone,Medium density fiberboard, Steel, Tube, Metal, Plastic,cloth,bottles,Aluminium, Cable, Paper, etc..
  • 【42ml Quick Drying Ink Cartridge】This TIKTONER 127T1 handheld printer Comes with a 42ml quick-drying black ink cartridge,printing is extremely clear, Waterproof Ink Cartridge.Clear image display, stable and reliable printing performance..
  • 【Package of Handheld Expiry Date Printer】Lightweight Handheld Inkjet Printer, Fuselage is 470g only (the weight of ink Cartridge not included) .Package Included: 1×Handheld Printer,1×Touch Pen, 1×Power adapter, 1×U-disk, 1×42ml Waterproof Ink Cartridge (Black), 1×Sheet Metal Positioner, 1×Instruction Manual, 1x Portable Case..
Check Stock

HP OfficeJet Pro 8035 All-in-One Wireless Printer - Smart Home Office Productivity - Coral (4KJ65A) (Renewed)

  • Upgrade your office – Replacing the HP officejet Pro 6978, This home office printer offers faster printing at 20 pages per minute, Includes fax and scan-to-usb capabilities, and is 14% smaller.
  • Sustainable design – This inkjet printer is made from recycled plastics and other electronic to 15% by weight of plastic.
  • Organize documents 50% faster – eliminate steps in repetitive tasks and sync to quick books, Google Drive, and more using smart tasks—the easiest way to digitize and organize receipts and business documents on your phone.
  • Print remotely using HP smart app – access your printer and Scanner, monitor ink levels, and Print, copy, and scan on the go with our highly-rated HP smart app.
  • Self-healing Wi-Fi – ensures you stay connected by detecting issues and automatically undergoing up to 3 Stages of reconnection to keep your Wi-Fi stable and reliable.
  • Built-in security essentials – protect sensitive data with built-in security essentials like basic encryption, password protection, Wi-Fi security, and document protection.
Check Stock