Categories

Best Plastic Spigot

2 PACK 7.9 Gallons (30 L) Plastic Bucket Fermenter with Spigot, Grommeted Airtight Lid, 3 Piece Airlock for Beer, Wine, Mead, Kombucha Fermenting

  • This is a set of 2, 7.9 gallon plastic fermenter complete with lid, airlock, and spigot..
  • These buckets are made from Polypropylene and are ideal for all types of fermentations, especially beers with high krausen.003c/p003e.
  • Set Includes: (2) 7.9 gallon plastic bucket, (2) Plastic lid with hole and grommet, (2) 3 Piece Airlock, (2) Spigot.
  • Included spigot eliminates need to siphon.
  • The bucket comes pre-drilled and threaded, ready for the spigot to be screwed in..
Check Stock

Good Ideas IMP-N50-DBR Impressions Nantucket Rain Saver Rain Barrel, 50 Gallon, Dark Brown

  • 50 Gallon capacity rain barrel and 4 inch planter top.
  • Wicker finish adds class and style to your rain harvesting.
  • Meshed screen blocks debris from entering your water supply.
  • Dual spigot locations for hose or five gallon bucket-Brass spigot will not rust or break like plastic alternatives.
Check Stock

Water Cooler Spigot fits for Rubbermaid Gott Cooler Valve (Pack of 1)

  • Brand New – Unused Parts Top Quality, Generic Aftermarket Part.
  • Water Cooler Spigot for Rubbermaid and Gott Coolers Discharge of 45 degrees.
  • Actual thread measurement is 1 1/2″ x 3/4″ Overall Length is 3 1/4″.
  • Kit Inlcudes Spigot with thread gasket 2 Rubber Sealing Gaskets Plastic Washer Plastic Nut.
Check Stock

Beverage Dispenser Replacement Spigot,Stainless Steel Spigot for Water Dispenser,Drink Dispenser Replacement Faucet

  • Durable: The spigot is made of high-quality stainless steel, lead-free food grade, and corrosion resistant..
  • Fits Most Dispensers: This beverage dispenser replacement spigot will fit 16mm or 5/8" openings and dispenser wall thicknesses of 17mm or 11/16"..
  • Widely used: Beverage dispenser replaces spigot for dispensing lemonade, kombucha, wine, sun tea, juice..
  • Satisfactory choice: stainless steel spigot is a good choice to replace the plastic spigot that comes with the dispenser.
  • Good after-sale service: If you have any questions about the product, please contact us, we will reply within 24 hours.
Check Stock

Push Style Spigots for Beverage Dispenser Carafes (2-Pack), Replacement Lever Pour Spouts for Beverage Dispenser, Chrome Design Lock Open Style

  • ELEGANT & AFFORDABLE: With an attractive chrome exterior and sturdy plastic interior, these are both economical and attractive..
  • VALUE 2-PACK: Receive two push style spigots. Ideal for upgrading multiple beverage dispensers or having one and a spare. Use for your favorite water crock too..
  • FOOD SAFE: Made of high quality food safe plastic and silicone..
  • ALL NECESSARY HARDWARE INCLUDED: Each easy to install spigot set comes with spout / spigot, rubber gaskets AKA washers, and plastic nut to seal tightly..
  • LOCK OPEN LEVER: Push up and this spigot will stay open for hands-free dispensing.
Check Stock

WidgetCo Black Plastic Pour Spouts

  • Replacement spigot fits all 38 mm thread spouts with 1.2 inch.
  • Applications for this plastic replacement spigot include blow Molded bottles for beverage dispensers, water dispensers and liquid detergent dispensers.
Check Stock

BTSKY™Stainless Steel Beverage Dispenser Replacement Spigot Fits 16mm（5/8 inch）Opening - No Lead Dispenser Replacement Faucet, Polished Finish

  • Multifunction Replacement Spigot: stainless steel spigot for beverage dispenser, juice jar or wine barrel or or any other beverages. A great addition to outdoor parties, receptions, hotel dining rooms,or any other events.
  • Quick Installation: this replacement spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick.
  • Premium Quality : This Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable, good for health and with a long life with proper appliance.
  • Notice: Please wash it before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten.
  • Do not over-tighten, clean thoroughly after each use, keep in open position for storage.
  • Excellent Flow with No Leaks: This stainless steel spigot will not only look nicer but will dispense any juice or drinks efficiently, unlike plastic or low-quality spigots that tend to leak, crack or splash water or juice everywhere, this spigot has an excellent continuous flow.
Check Stock

(3) Water Cooler Spigot for Rubbermaid Gott Cooler Valve

  • Brand New – Unused Parts Top Quality, Generic Aftermarket Part.
  • Water Cooler Spigot for Rubbermaid and Gott Coolers Discharge of 45 degrees.
  • Actual thread measurement is 1 1/2″ x 3/4″ Overall Length is 3 1/4″.
  • Kit Inlcudes Spigot with thread gasket 2 Rubber Sealing Gaskets Plastic Washer Plastic Nut.
Check Stock

(2) Water Cooler Spigot for Rubbermaid Gott Cooler Valve

  • Brand New – Unused Parts Top Quality, Generic Aftermarket Part.
  • Water Cooler Spigot for Rubbermaid and Gott Coolers Discharge of 45 degrees.
  • Actual thread measurement is 1 1/2″ x 3/4″ Overall Length is 3 1/4″ Kit Inlcudes.
  • Spigot with thread gasket 2 Rubber Sealing Gaskets Plastic Washer Plastic Nut.
Check Stock

Replacement Spigot Spout for Beverage Dispenser, Solid Stainless Steel Water Dispenser Replacement Faucet with Anti-Clogging Cap Polished Finished

  • Quick Installation-This Beverage Dispenser Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick and for flat surface can fit up to 1 inch hole..
  • High Quality-This beverage spigot is made up of food-grade 304 stainless steel and Come with stainless steel Anti-Clogging Cap, no lead and it will not rust..
  • Multi-Function-This beverage spigot is great for use in beverage dispenser, wine barrel, beer equipment, coffee machine and other drink dispenser..
  • Heavy Duty-This stainless steel spigot is solid and heavy duty. It is designed to replace those cheap, easy break and leak plastic spigots of drink dispenser, beverage dispenser jar or sun tea jar..
  • Lifetime Warranty-Lifetime replacement guarantee, the only beverage/tea jar urn spigot replacement you need to buy. Keep contact info on packing for warranty purpose..
Check Stock

Spigot for Beverage Dispenser, 2 Pack Drink Dispenser Spigot Replacement Beverage Dispenser Spout Drink Spigot Water Dispenser Faucet

  • PREMIUM MATERIAL - The replacement spigot for beverage dispenser is made of high quality plastic, food grade drink spout..
  • INSTALLATION SIZE - Beverage dispenser spout is suitable for openings of 16mm or 5/8 inch, and the wall thickness does not exceed 17mm or 11/16 inch..
  • USEFUL & AFFORDABLE - Plastic beverage dispenser replacement spigot has excellent stability. It not only has the function of metal faucet, but also more stable for acid and alkali, more affordable..
  • BEAUTIFUL DESIGN - Drink dispenser spout replacement surface is electroplated, beautiful and practical. Suitable for most self-service beverage services, widely used in parties and family gatherings..
  • INSTALLATION METHOD - Please clean the water dispenser spigot before use. First, put the silicone pad on the beverage faucet connection pipe, and then insert the replacement spout for beverage dispenser into the dispenser, at last lock nut..
Check Stock

Igloo Push-Button Spigot for 2-10 Gallon Water Cooler Beverage Jugs

  • Made by Igloo. For use on Igloo brand 2-10 gallon beverage water cooler jugs (see full list below)..
  • Angled pour spout for easy dispensing. Drip-resistant valve..
  • Igloo's spigot assembly consists of the following components: main body with spout, rubber gasket, plastic washer, and plastic nut..
Check Stock

Stainless Steel Beer Beverage Dispenser Replacement Spigot Faucet Black Handle for Coffee Jar Juice Cold Hot Water Wine Beer Drink barrel Milk tea bucket by MUGLIO(16mm)

  • The Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance..
  • This Beverage Dispenser Replacement Spigot Has Quarter-Turn Ceramic Valve. It requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick..
  • Good choice: This stainless steel spigot is a good choice to replace the plastic spigot that comes with the beverage dispenser..
  • Notice - Wash and tear off the blue protective films on the washers before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten. Rinse thoroughly by clean water with handle in partial open position (45 degree turn) after the usage. If used for sugary drink, we suggest removing the spigot from the dispenser and clean thoroughly..
  • Good after-sales: we promise to make customers 100% satisfied. If you have any questions about the products, please contact us..
Check Stock