Categories

Best Plastic Tie Plate

AUTOBOTS 1/2" D Rings for Trailers Heavy Duty Trailer Tie Down Rings,Max 12,000 Lbs,Includes All Mounting Hardware, Forged Steel Bolt-on D Ring,Large Trailer Tie Down Anchor Points 2 Pack Black

  • 【D Rings for Trailers】: 1/2 Inch d-rings Welded on 1/4" Thick Steel Plate, Plate Size 6.3"x4.3", and Another Back Plate of the Same Size, 4 10.9 Grade Bolts and 4 Anti-loosening Nuts for Mounting, 2pack.
  • 【Includes All Mounting Hardware】：Autobots D Ring Tie Down Anchor Points Provided with 2 Sets of D-Ring Welded to the Backing Plate, and 2 Backing Plates of the Same Size, 8 Bolts Grade 10.9, 8 Nuts Grade 10.9, Drill to Install in Minutes.
  • 【Top Quality Material】：Trailer Tie Downs is Made with Heavy Duty Drop Forged Steel, Galvanized and Power Coated, Solid and Strong, our d ring tie downs Also Prevents Rust and Corrosion. Its Break Strength Reaches Up to 12000lbs.
  • 【Widely Used】：Bolt D Ring Anchor Are the Most Convenient and Flexible Tie-down Device Available. Often Used As Mooring Anchors on Trucks, Trailers, Pickups, Campers, Vans, Docks, Boats, Excavators, Flatbeds , Garages, Warehouses and Workshops.
  • 【More Professional and Reliable】- Compared to Ordinary Trailer Tie Down Rings, Our Trailer D Rings Have Larger Loads, Easier Installation, an....
Check Stock

150 Pieces Plastic Mini Dessert Plates 2.5 x 2.5 Inches and 150 Pieces 4 Inches Tear Drop Mini Appetizer Plates Disposable Appetizer Spoons for Weddings Party

  • ... 4 x 2 x 0.5 inches/ 10 x 5 x 1.2 cm, serving in bite size pairing in tapas, desserts, appetizers, fresh fruit, chocolate truffles and good looking candies or some sauces.
  • Stylish and Elegant: with modern design, ingenious and striking teardrop shapes will showcase your loved finger foods.
  • Quality transparent square plastic plates are transparent and shiny, allowing guests to pick up sample delicious food with grace.
  • Quality Material Selection: our mini dessert plate and one bite appetizer spoon are made of hard plastic, reliable and safe.
  • They are clean and scratch resistant, so you don't have to worry about dropping your dessert plate, even if there are young people at the party.
  • Easy to clean: take less time to clean and can be applied repeatedly.
  • Enjoy the party with these disposable dessert plates and spoons, and when the party is over, you just need to throw them away or wash them quickly and stack them for later use.
  • Package Includes: you will receive 150 party appetizer dish and 150 mini taste spoon, suitable for wedding reception, carnival, birthday, anniversary, graduation party, New Year's eve and black tie events, or as service supplies for outdoor party, pool party, dining room and kitchen.
Check Stock

AQQO Aluminum Folding Hand Trucks Portable Luggage Cart Lightweight Travel Hand Truck/Heavy Duty Hand Trucks/Two-Wheel Luggage Cart (80LB)

  • Unique folding design, two gears adjusting, can fit your needs perfectly.
  • With a unibody design, the base plate is easy to unfold and loads up to 80 Lbs.
  • Light Metal and Plastic, makes it easy to carry, and can put into the car after folded..
  • Two extra strong files, can easy to adjust and tie with ropes..
  • Easy to fold and unfold, just need to step on the plate..
Check Stock

Truck Tie Down Anchors BoxLink Tie Down Cleats Brackets Bed Locking Kit Anti-Theft Screws Replacement for Ford FL3Z-9928408-AB FL3Z-99000A64-B Compatible with Ford F150 F250 F350-4 Packs

  • Superior Material: The box link tie downs with keys and plates is constructed of die-cast zinc with heavy-duty ABS plastic housing and stainless steel....
  • Easy to install: Fix the plate with four screws,then install the boxlink and lock the key..
  • Safe and Reliable: This Truck Accessories come with Stainless Steel Lock Assembly and sets of keys for the theft-resistant cleats included make sure....
  • WideI Range For Use: The tie down anchors are heavy-duty 1000 lb rings, they are ideal to add tie down points for a truck and let you far away from....
  • The set includes：4 pcs tie down anchors (8 keys), 4 pcs tie down brackets, 16 pcs fixing screws , 1 pcs installation tool.Feel free to contact us if....
Check Stock

Nstarsmotor Truck Tie Down Anchors Perfect Replacement for Ford 2015-2021 F150 F250 F350, Boxlinks & Tie Down Plates(4 Pack) FL3Z-99000A64-B, FL3Z-9928408-AB

  • ...50 F350 and raptor accessories. Replace OE# FL3Z-99000A64-B, FL3Z-9928408-AB..
  • 【Superior Material】-The box-link is constructed of Die-cast Zinc with anti-corrosive coating and ABS. The tie down plate is constructed of stainless steel. The maximum bearing weight of the 4 pieces is 1000 pounds. We designed the ABS plastic part just for easy installation, it does not bear any gravity..
  • 【Function】-This tie down anchor can add additional fixing points to facilitate the transportation of more goods, and sometimes it can be used to prevent theft. It's the best partner for a pickup truck. The black coating is anti-corrosion and it is suitable for all weathers..
  • 【Easy to install】-Fix the plate with four screws, some models do not have screw holes, you can drill holes with the tap and self tapping screws(Please contact us if you have any questions during the drilling process), then install the box-link and lock the key..
  • 【Lifetime Warranty】You can return or exchange the product at any time, if you have any questions, please contact us and you will have a satisfactory reply. Our design team is constantly upgrading product features to improve user satisfaction with the product. Every bed tie down is tested to the limit with professional equipment..
Check Stock

Spsyrine White Antique Charger Plate, 13" Embossed Plastic Table Plate Chargers for Dinner, Set of 6 Elegant Decorations for Wedding, Dining, Party Events.

  • 【Commercial Quality】Plastic charger plates are not only lightweight but durable, they are designed to be easily used and reused..
  • 【Versatile】Use these charger plate on your dining table for a more upscale look. They’ll be perfect for use with dinner plates..
  • 【Multiple】Elegant decorations for weddings, Christmas, Thanksgiving, dinner parties..
  • 【Attractive】Plate chargers are ideal color option to tie into variety themes. They are perfect for your dinner parties and everyday life..
  • 【Easy Care】Simply wash under rinsing water and make sure to use a soft dish cloth..
Check Stock

Makeronics Solderless 1660 Breadboard Super Kit - 1660 Tie-Points Experiment Plug-in Breadboard with Aluminum Back Plate + 350 Jumper Wires + 65 Jumper Wires for Prototyping Circuit/Arduino

  • ✔️1660 Test Points In Total(including 2 terminal strips 1260 tie-point and 4 bus strips 400 tie-point) & 3 Binding Posts.
  • ✔️350 U-shape 0.6mm +/- 0.02mm tolerance in diameter pure copper jumper wires + 65 Pack 24AWG Breadboard Solid Multi colors pure(100%) Copper....
  • ✔️ABS Plastic Housing, Aluminum Back Plate,Metal Contact Clips.
  • ✔️Binding Posts Coded Black, Red and Green, Coloured Coordinates for Easy Component Placement.
  • ✔️Perfect for Arduino Shield Prototyping and Testing. Powered by Makeronics Technology.
Check Stock

BestMounts - Low Voltage Nail-ON Mounting Bracket 1 Gang Multipurpose New Construction – (10 Pack, Yellow)

  • Nail On Low Voltage Mounting Brackets for New Construction.
  • Nail on, Single gang, Low Voltage mounting bracket for new construction on wood studs. Built in loop to tie off cable..
  • Lower cost than extension rings or mud rings.
  • Ready to install - nails come parked in-place , Easy, secure mounting of bracket to studs.
  • Allows wall plate to mount flush with wall surface , 25% faster installation over steel or plastic mud rings!.
Check Stock

Will's Family Store Stable and Barn Bucket Hook Hanger with 2 inch Tie Ring for Playful Horse or Livestock

  • This versatile bucket hook comes in all one piece with a plate, ring and hook that can be used to hang feed/water buckets as well as tie downs for tying the horse/livestock.
  • Preventing the bucket from popping off, if you have a truly playful horse/calf/goat/donkey/mule, this bucket hook will keep both of your animal and bucket right where you want them.
  • Great for animal tie down and other stable and barn applications.
  • When used as a gate latch, we recommend our tie ring and chain lock, please search B07XGQ4N9N, B07XMKTS3R, B07XKGPKSW, B07XJ9TXXF.
  • Simply twist the 2 screws provided through the plate into a sturdy beam or stud in the wall.
Check Stock

NA Horses Stall Guard with Adjustable Straps and Sturdy Spring Hooks, Designed to Keep Horses Safe and Comfortable, 27\x19\ (Purple)

  • This versatile bucket hook comes in all one piece with a plate, ring and hook that can be used to hang feed/water buckets as well as tie downs for tying the horse/livestock.
  • Preventing the bucket from popping off, if you have a truly playful horse/calf/goat/donkey/mule, this bucket hook will keep both of your animal and bucket right where you want them.
  • Great for animal tie down and other stable and barn applications.
  • When used as a gate latch, we recommend our tie ring and chain lock, please search B07XGQ4N9N, B07XMKTS3R, B07XKGPKSW, B07XJ9TXXF.
  • Simply twist the 2 screws provided through the plate into a sturdy beam or stud in the wall.
Check Stock

BEADNOVA 50 Pairs Pin Backings Tie Tacks Blank Pins with Rubber Pin Backings Pin Backs for Crafts (Silver Black, 50 Sets)

  • PACK INCLUDES: 50pcs plastic clutch backs in black color and 50pcs blank pins in silver color. Plastic pin back is 11.5mm in diameter. Blank pin is 9mm in length with 10mm diameter disk top..
  • LIGHT MATERIAL: Pin backs are made of plastic and blank pins are made of copper. Both materials are light so there is no extra weight added on your badges. These butterfly clutch tie tacks blank pins backs keep tie in place securely and firmly, handy and convenient to use..
  • GOOD PRICE FOR REPLACEMENT: Pack of 50 sets tie tacks blank pins with pin backs, enough for replacement to your lost or torn label pins, service bars, name tags etc. This great value pack is also a good supply for diy jewelry and craft making..
  • STORAGE BOX: Come with plastic storage box, you can store tie tacks and blank pins neatly..
Check Stock

PZRT 20pcs Plastic High Security Seal With Metal Insert Adjustable Self-Locking Pull Tight Cable Ties Tags Disposable Wire Padlock for Cargo Container Seal Lock Red

  • Type: Adjustable Plastic Security Seal Cable Tie, security seal, firmly, easy to lock, good insulation, not easy ageing, good toughness..
  • Feature: Self-locking, pull tight, no tools required.
  • Adjustable length with over twenty locking positions.
  • Unique stainless steel locking plate that strengthens the locking chamber and is highly tamper evident..
  • Function: This is a one-time seal. Insulating plastic seal products, plastic seals can also be used to secure the wires, cables and other lines..
  • Multi Purpose: Label, marking, sealing tape, logistics security lock, energy measurement, container seal, container security lock, prevent from stealing and leakage etc..
  • Application: Widely used for Application: Widely used for airline cargo, bank and postal services roll-cages,clinical waste management, courier services, cash-in-transit, warehouses, bank bags,cash box,fire extinguisher,medical care,dining car, logistical service etc..
Check Stock

Tie Plate Bracket Repair Mending Plate Bracket Metal Brackets for Wood Nail Plates for Studs for Trusses Wood Timber 8-1/8 Inches x 3 Inches, 2 mm Thickness, Hot Dipped Galvanized Steel (10 Pcs)

  • ...ity hot dipped galvanized steel, these metal brackets for wood are anti corrosion and wear-resistant, rustproof and sturdy, not easy to break or deform.
  • The surface is very smooth, and will not hurt your hands.
  • Sufficient Quantity: you will receive a total of 10 pieces of flat tie plates, and screws are not included.
  • Sufficient quantity can satisfy your daily home use and replacements, also you can share them with your partners to use together.
  • Dimensions Weight: the length of the flat tie plate repair mending plate bracket is about 8-1/8 Inches (208mm), and the width is about 3 inches (78mm).
  • The thickness is about 2 mm/ 0.08 inches.
  • The nail holes diameter is φ13/64 inches (5 mm).
  • Please check the size before placing an order.
  • Each fixing bracket connector weighs 203g, and a total of 2.03 kg.
  • Easy to Use: tie plate bracket strap adopts a staggered nail pattern for a strong connection to prevent dense nails and avoid wood splitting, giving you a nice using experience.
  • Usage Scenarios: this metal fixing bracket connector is designed to transmit tension loads in a variety of applications, such as furniture fixing, splicing and various wood to wood connections, or reinforce various seams, seams and cracks.
Check Stock