Categories

Best Plate Hanger Disc

SR Performance Clutch Alignment Tool; 10 Spline

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 1-3/4 inch O.D. shaft, 1 inch pilot, 10 splines.
Check Stock

Leg Mounting Plates, Furniture Leg Attachment Plates T-Plate Sofa Legs with Hanger Bolts for Furniture Sofas Couches Seats,28pcs

  • Furniture repairing replacement: this furniture leg mounting plate can attach legs to new or damaged sofas, couches, seats, ottomans, etc..
  • Application: these plates can be applied to repair the furniture when the sofa are damaged and missed the threaded nut, or the T-nuts have wiggled loose and won't stay in place.
  • Industrial standard: 4 pcs of 49 x 49 mm /2" x 2" T-Plate, 4 pcs of 5/ 16" (M8) hanger bolts, 4 pcs of 5/ 16 inch (M8) female converters,16 pcs of screw adapters for 5 mm unthreaded holes.
  • Easy installation: no need to purchase compatible hanger bolts and the other screws, you can raise the height of your sofa to replace the legs screw with this matched item.
  • The hanger bolt hole are beveled so that the provided hanger bolt will fit well with the mounting plate.
Check Stock

Dorman 14505 Clutch Alignment Tool Compatible with Select Models

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.
Check Stock

TANOSII Foldable Purse Hook Floding Handbag Hanger Bling Rhinestone Bag Holder for Table Desk 1 PCS White

  • Foldable handbag hook foldable handbag hanger purse hook purse hook for table handbag hanger for table handbag hanger hook hanger for purse on table purse table hanger hook table handbag holder table hook purse holder purse table holder hook.
  • Material: Our purse hooks are made of zinc alloy and color rhinestone series, the disc of handbag hanger is made of anti-slip rubber which can prevent it from slipping on smooth or hard surfaces..
  • Size: 4.35 x 4.35 x 1.4 cm / 1.7 x 1.7 x 0.55 inch. The diameter of the crystal is 1.3 inch.This kind of long purse hook can bear 11 lbs the most..
  • Avalible thickness: Our table handbag holder should be used on the table within 1.97 inches..
  • Easy to take: The handbag hanger hook is lightweight and foldable that can be taken to everywhere easily.You can use it to keep your bag clean and safe beside you.It's a good choice for daily use..
Check Stock

Btibpse Legs Mounting Plates, Furniture Leg Hanger Bolts, Sofa Legs Attachment Plates Kit for Sofa Table Couches Leg T-Plate 5/16\ (M8)

  • Package included: 4 Pcs T-Plate, 4 Pcs 5/16 inch (M8) hanger bolts, 4 Pcs 5/16 inch (M8) female converters, 16 Pcs screw adapters for 5mm unthreaded holes..
  • Beveled hanger bolts hole: the hanger bolt hole are beveled so that the provided hanger bolt will fit well with the mounting plate.
  • Application: these plates can be applied to repair the furniture when the sofa are damaged and missed the threaded nut, or the T-nuts have wiggled loose and won't stay in place.
  • This furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more..
  • Easy installation within minutes: no need to purchase compatible hanger bolts and the other screws, you can raise the height of your sofa to replace the legs screw with this matched item.
Check Stock

ClutchXperts SPC Clutch Alignment Tool KIT Compatible With 2006-2015 Mazda MX-5 Miata 2.0L 6-Speed

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 7.3 inches long.
Check Stock

DAN SPEED Invisible Adhesive Plate Hanger, 40/80 Pieces Vertical Plate Holders for Wall Hooks for Decorative Plates and Art Supplies 1.25 Inch (80pcs)

  • Package includes: You will get 40/80 pieces DAN SPEED invisible adhesive plate hangers, enough for your daily use and replacement.
  • Wide Applications: These DAN SPEED plate hangers fit for decorative plates, antique china, antique plates, art, photo and so on, which can make your house look more beautiful and more artistic..
  • Self-adhesive design: These DAN SPEED invisible vertical plate holders with adhesive back design, can fix firmly on the wall or other smooth surface, and not easy to fall off.
  • Size information: Our invisible adhesive plate hanger the size of the vertical plate holder is 1.25 x 1.25 inch/ 3.2 x 3.2 cm, which can hold up to 1.5 pounds, and the diameter of the board is up to 10 inches.
  • You can use 2 or more hangers to store heavier items..
  • Material: The adhesive plate hanger is made of quality ABS material, durable and reusable.
Check Stock

Metal Plate for Phone Magnet, 8 Pack Replacement Magnet Disc Magic Mount Plate with Adhesive Backing for Socket Grips & Magnetic Car Holder Cradle Stand(Dashboard/Vent/CD Slot/Windshield) - Round

  • 【Work with various magnetic mounts】 Phone metal plate for magnetic mount is NOT magnetized, and they need to use with magnetic car holders. Adhesive metal plates are attachable to automobile magnetic phone mounts. 8 pack genius circular magnet plate for phone can go with multiple devices. Phone mount plate disc laminated cellphone allows you to place on smartphone horizontal or vertical under the magnetism between magnets and iron disk piece..
  • 【For Socket Grip Stands】 Socket grips is NOT included! Small metal plate of circle two size for both mobile phone magnet vehicle mounts and socket grips. Rose gold thin metal phone plates are pretty accurate size for collapsible sockt, to hidden inside openable socket top whose cap can take apart/assemble easily. Bigger black mount metal plate can attach perfectly on the regular flat swappable expanding socket's pattern surface..
  • 【3M Adhesive Backing】 Metal disc with premium strong stickiness double-sided 3M adhesive backer, so self adhesive suit all magnetic mobile phone magicmount. Please place 3M metal plate sheet on the phone away from wireless charger sensor. Or apply mount metal plate to phone case, and remove case while charging. Magnet mettallic disc won't fall of on rugged and bumpy road once....
Check Stock

Hyever Table Sofa Furniture Leg Mounting Plate with Hanger Bolts Attachment T Plate,Pack of 4

  • Good quality galvanized iron mounting plate designed for new or damaged sofa legs and couches,table,ottomans,etc.
  • Can be used repairing the sofa or other furniture when they are damaged, missed the threaded nut or the T-nuts have wiggled loose.
  • Mounting plate include hanger bolts and mounting screws. You can easy to installation and fix you furniture legs use them.
  • 2mm thickness attachment plate connect the furniture legs firm, you don't worry about them getting loose.
  • The hanger bolts can screwed into the leg of the furniture and not need the female converters screw.
Check Stock

Updated Telescopic Sink Storage Rack, Adjustable Length Drainer Sink Storage Tray Sponge Soap Holder with Dishcloth Hanger Expandable Storage Drain Basket for Home Kitchen (Blue)

  • Sponge Holder and Dishcloth Hanger 2 in 1: The upside down U shape bar is for hanging dish cloth, and the bottom holder is for keeping sponges, brushes, scrubbers, dish scrappers. Keep all you need in the same place and make your sink area neater and less cluttered.
  • Drainer Plate: With a drainer plate at the bottom of sponge holder for water drainage, keep your dish sponge, brush dry. The plate is made of stainless steel and removable, it is easier to clean.
  • Weighted Base: The base of the dishcloth hanger is weighted, heavy enough not to tip over easily. With 4 protective foot pads on the bottom keep from marrying countertops.
  • Elegant Design: Stainless steel U shape dish cloth holder, and marble look base, simple and sleek, coordinates with other items in the kitchen. A good addition for countertop.
  • What’s Include: 1 x Sponge holder Dishcloth Hanger, 45-day money back guarantee, worry-free 24-month warranty, and friendly customer service from ZCCZ.
Check Stock

Invisible English Disc Adhesive Medium Plate Hanger Set (4-3 Inch Hangers)

  • HIDE HOOKS, CLIPS, WIRES Invisible English Adhesive Disk allows plates to hang flat against the wall while eliminating ugly hooks, clips and wires..
  • HANG YOUR FAVORITE DCOR Adhesive disk is ideal for hanging decorative items made of porcelain, china, earthenware, glass, or unvarnished wood..
  • STRONG HOLD - The Disc gives a permanent adhesion of great strength to a glazed or an unglazed surface. A fixing that will not age-harden or deteriorate with time..
  • SET OF 4 This set comes with 4 3-inch hangers that are designed to hold up to 3 pounds and plates up to 8 inches in diameter. Use 2 or more disc hangers to hold heavier items..
  • HOW TO USE Clean the plate with soap and water. Wet the adhesive side of the Disc and slowly agitate with your finger to activate glue. When the glue becomes tacky, apply the Disc to the back of the plate and press down firmly. Leave to dry overnight. Before hanging, test the strength of adhesion by pulling firmly on the ring..
Check Stock

Precise Portions 9 Inch Porcelain Portion Control Dinner Plate for Adults and Teens - Includes a Nutrition Planning Guide - One Each

  • DIETICIAN-DESIGNED: This Diet Plate is divided into three section portions for better Nutrition Planning on both Adults and Teens. An easy way to eat well and maintaining proper nutrition planning at home.
  • PREVENT OVEREATING: This Food Portion Plate helps you eat the Right Food in Right Portions. By optimizing the Portion Size, nutritious eating is regularised.
  • thereby develops a Healthy Eating Habit..
  • NUTRITION PLANNING DISC: Our Plate in combination with our Nutrition Planning Disc (comes with this Purchase) helps Maintain Good Health and Manage Blood Sugar Level at Home. It is an Excellent Tool for Weight Loss Management, Obese, Diabetes and Post Bariatric Surgery..
  • PORCELAIN DINNER PLATE: This FOCUS 9 Inch Dinner Plate is made of Porcelain. You would certainly love this Elegant and Beautiful Finish..
  • MICROWAVEABLE AND DISHWASHER SAFE: This Meal Measure Plate is Microwave and Dishwasher Safe. This is a high-quality, durable and can be of life-long use..
Check Stock

40 Pieces Invisible Adhesive Plate Hanger Vertical Plate Holders for The Wall Hooks Decorative Plates Wall Holders for Display 1.25 Inch

  • Package Include: you will receive 40 pieces invisible adhesive plate hangers, you can apply them according to your own needs..
  • Hide Hooks:These invisible hanger allows plates to hang flat against the wall with adhesive back design.and not easy to fall off..
  • Wide Applications: These plate hangers fit for decorative plates, antique china, antique plates, art, photo and so on, which can make your house look more beautiful and more artistic..
  • Size information: Our invisible adhesive plate hangerthe size of the vertical plate holder is 1.25 x 1.25 inch/ 3.2 x 3.2 cm, which can hold up to 1.5 pounds, and the diameter of the board is up to 10 inches.
  • You can use 2 or more hangers to store heavier items..
  • Quality Material: the adhesive plate hanger is made of quality ABS material, which is durable and not easy to break, and the hook is made of stainless steel, A fixing that will not age-harden or deteriorate with time..
Check Stock