BUCKTOOL CBN Grinding Wheel, Sharpening Wheel, High Speed Steel Tools, 180Grit, 8Inch, 1' Wide, 5/8' Arbor, Ideal for Sharpening Wood-Turning Tools, Chisels, Hardcore and More, Cubic Boron Nitride

  • Advanced Material: The hardness of the CBN grinding wheel is much higher than that of ordinary abrasive, meaning that its cutting ability is stronger and sharper. Compared with diamond grinding wheels, it has more advantages in processing ferrous metals.
  • Broad Application: This Sharpening wheel is suitable for grinding and polishing products of various materials, such as woodturning tools, high manganese steel, alloy steel, chilled cast iron, high hardness, and soft and tough materials, which allows you to satisfy most of your daily needs.
  • Universal Match: Designed for use with 8-inch bench-type grinders 3600RPM (Maximum), work great on Bucktool bench grinder TDS-200DS and TDS-200C4HL, can also be matched with other brands 8” bench grinder and you have not to worry about its use restrictions.
  • User Experience: While sharpening high-speed steels, the grinding wheel not only has higher wear resistance and easier to maintain shape compared with ordinary abrasives but also its excellent thermal conductivity achieves cool cutting, generating much less heat.
  • No Maintenance: Due to the high wear resistance of the Cubic Boron Nitride coated wheel, the shape of the grinding wheel does not change much during use meanwhile it can be used for a long time and you do....
Check Stock

Lincoln Electric KH236 Bench Grinding Wheel, Aluminum Oxide, 4000 rpm, 6\ Diameter, 1-1/4\ Arbor, 60 Grit (Pack of 3)

  • Precision Made Solid Aluminum body 8" dia by 1/4" with CBN on the face and 1/4" sides of the wheel. For 5/8 inch shaft..
  • Designed for use with slow speed 8 inch bench type grinders.
  • Will never need dressing, or truing. Wheel Diameter stays the same, so you will not need to be keep adjusting your jig. Now includes two precision ground, parallel surface washers..
  • Use with High Speed Steel (HSS)Tools Only.
  • Note: These wheels are made with very tight tolerance's. The arbor hole is precisely cut to .6254 inches. The shaft on many grinding motors are not as precise, and may be slightly larger then .625 inch. This will cause an interference fit. A little bit of emery cloth on the shaft will help get the wheel on..
Check Stock

MRCM Drill bit Sharpener for High-Speed Steel, Masonry, Carbide, Cobalt, & TiN-Coated Drill Bits,with Adjustable Angles from 90° to 135°,Sharpens 3mm-20mm Drill Bits… (MR-20G)

  • Capable of sharpening drill bit from 90°to 135°point angle of either a standard or split point..
  • Sharpens Standard Drill Bits – from 3mm" to 20mm" standard twist bits.Capable of setting the trimming angle to adjust the amount of material taken off on the center point of the drill bit,which will allow production of various drill bits to accommodate different material.
  • Grinding wheel is optional: CBN or SDC. The CBN model is used for High speed steel material.
  • while the SDC model is used to grind alloy tungsten steel material..
  • Capable of sharpening the front rake,front tip angle and clearance angle of drill bits.
Check Stock

PRETEC Grinding & Cutting Wheels 4 1/2 inch Set,Angle Grinder Wheel Set,Cut Off Wheels 20pcs,Grinding Wheel 3pcs,4.5” Flap Discs 3pcs for Angle Grinder for Cutting Grinding

  • 【Grinding Wheel Set】4-1/2 inch angle grinder wheel set consisted with 3 kinds of grinder discs: 20 pcs cutting wheel,3 pcs grinding wheel,3 pcs 80 Grid flap disc.Also with a sturdy carrying case for holding 4.5”cut off wheel for metal..
  • 【Cutting Wheel】20PCS cut off wheels 4 1/2 inch has passed the CE&ISO certification, built for a more robust and safety cut off wheels.Fast burr free cutting with minimal material loss, Will not splash and cause injury..
  • 【Grinding Wheel:】3 pcs premium 4-1/2 “* 1/4 “* 7/8 “Grinding Disc for metal and stainless steel, T27 bevel type, A24T Aluminum Oxide Grains for Aggressive Grinding and High Stock Removal. Operating up to 13,000 RPM and 80M/S. Meet almost all your general polishing requirements..
  • 【Flap Disc: 】3 pcs flap discs, Constructed of industrial grade premium zirconia. Durable,good abrasion resistance,and anti-clogging.4.5″ * 7/8 inch arbor size flap disc is compatible with most air and electric angle grinders..
  • 【Long Lasting Discs】Our disc is made of iridium-plated white corundum, so our cut-off wheel has 2 times the cutting life of a normal cutting wheel. These cutting discs are made by a special process of alumina abrasive to ensure extra toughness, sharpness, and durability..
Check Stock

HHIP 2405-4251 4 x 1-1/4 x 1-1/4 Inch D11A2 Flaring Cup CBN Wheel

Check Stock

uxcell Diamond Grinding Wheel Dresser 10mm x 24mm Single Point Dressing Tool for Surface Truing Deburring

  • Suit to the diameter of grinding wheel: Less than 350mm.
  • Applications: Mainly used for grinding wheel dressing of various grinding machines..
  • This grinding wheel dresser can remove unwanted debris and impurities from the wheel and reveal a sharp, clean cutting surface to restore and extend the life of the wheel..
  • The handheld diamond dresser is suitable for the dressing all kinds of grinding wheels, such as brown corundum grinding wheel, silicon carbide grinding wheel, white corundum grinding wheel and so on..
Check Stock

Diamond Dresser Single Point Grinding Wheel Tapered Point Tool 2.00 Carat - 1/2 Inch x 6 Inch

  • Diamond Dresser Single Point Grinding Wheel Tapered Point Tool 2.00 Carat - 1/2 Inch x 6 Inch.
  • Mainly used for grinding wheel dressing of various grinding machines..
  • This grinding wheel dresser can remove unwanted debris and impurities from the wheel and reveal a sharp, clean cutting surface to restore and extend the life of the wheel..
  • The handheld diamond dresser is suitable for the dressing all kinds of grinding wheels, such as brown corundum grinding wheel, silicon carbide grinding wheel, white corundum grinding wheel and so on..
Check Stock

Diamond Dresser Single Point Grinding Wheel Tapered Point Tool 0.25 Carat - 1/2 Inch x 6 Inch

  • Diamond Dresser Single Point Grinding Wheel Tapered Point Tool 0.25 Carat - 1/2 Inch x 6 Inch.
  • Mainly used for grinding wheel dressing of various grinding machines..
  • This grinding wheel dresser can remove unwanted debris and impurities from the wheel and reveal a sharp, clean cutting surface to restore and extend the life of the wheel..
  • The handheld diamond dresser is suitable for the dressing all kinds of grinding wheels, such as brown corundum grinding wheel, silicon carbide grinding wheel, white corundum grinding wheel and so on..
Check Stock

Diamond Dresser Single Point Grinding Wheel Tapered Point Tool 0.50 Carat - 1/2 Inch x 6 Inch

  • Diamond Dresser Single Point Grinding Wheel Tapered Point Tool 0.50 Carat - 1/2 Inch x 6 Inch.
  • Mainly used for grinding wheel dressing of various grinding machines..
  • This grinding wheel dresser can remove unwanted debris and impurities from the wheel and reveal a sharp, clean cutting surface to restore and extend the life of the wheel..
  • The handheld diamond dresser is suitable for the dressing all kinds of grinding wheels, such as brown corundum grinding wheel, silicon carbide grinding wheel, white corundum grinding wheel and so on..
Check Stock

Diamond Dresser Single Point Grinding Wheel Tapered Point Tool 1.50 Carat - 1/2 Inch x 6 Inch

  • Diamond Dresser Single Point Grinding Wheel Tapered Point Tool 1.50 Carat - 1/2 Inch x 6 Inch.
  • Mainly used for grinding wheel dressing of various grinding machines..
  • This grinding wheel dresser can remove unwanted debris and impurities from the wheel and reveal a sharp, clean cutting surface to restore and extend the life of the wheel..
  • The handheld diamond dresser is suitable for the dressing all kinds of grinding wheels, such as brown corundum grinding wheel, silicon carbide grinding wheel, white corundum grinding wheel and so on..
Check Stock

uxcell Diamond Grinding Wheel Dresser 10mm x 30mm Multi-Point Flat Head Dressing Tool for Truing Deburring

  • Applications: Mainly used for grinding wheel dressing of various grinding machines..
  • This grinding wheel dresser can remove unwanted debris and impurities from the wheel and reveal a sharp, clean cutting surface to restore and extend the life of the wheel..
  • The handheld diamond dresser is suitable for the dressing all kinds of grinding wheels, such as brown corundum grinding wheel, silicon carbide grinding wheel, white corundum grinding wheel and so on..
Check Stock

Sopko 100-1 L.H. 2-1/4\ Diam Grinding Wheel Adapter for 3/4\ Wheel Width

  • Series II wheels are made from an aluminum core, which is lighter in weight than steel and will run smoother on all grinders.
  • Ideal for sharpening woodturning tools (High Speed Steel only).
  • Designed for use with bench type grinders.
  • Wheel diameter does not change over time.
  • CBN material is on the face and sides (1/4") of the wheel.
  • Balanced in the manufacturing process and never need "Truing" or "Dressing".
Check Stock

Utoolmart Diamond Grinding Wheel Dresser, 10mm x 45mm Dresser Dressing Pen Tool, Dressing Tool for Correction Grinding Wheel Truing Deburring, Silver Tone, 1 Pcs

  • 【Feature】- The diamond dresser shank diameter is 10mm / 0.39-inch, the total length is 45mm / 1.77-inch, the color is sliver tone, has good abrasion resistance and high strength..
  • 【High Material】- The grinding wheel dresser adopts high-quality diamond, which has very high hardness and long service life. The shaft is made of iron and is chrome-plated to prevent corrosion and improve the wear resistance of the product..
  • 【Special Design】- The tip of the inlaid diamond is concentric with the shank. Ideal for dressing wheels in a quick and easy process. Diamond is firmly embedded in the embryo, not easy to fall off..
  • 【Easy To Operate】- The diamond wheel dresser is easy to carry, easy to use, repeatable dressing performance, consistent diamond structure and shape, sharply defined, pointed diamond..
  • 【Application】- The diamond wheel removes unnecessary debris and impurities on the grinding wheel, exposing a sharp and clean cutting surface and extend the life of the wheel. When trimming and the speed should be uniform..
Check Stock