Categories

Best Plated Flange

A-Team Performance - Hex Flange Bolts LS Exhaust Flange Manifold Header Zinc Plated - Compatible with GM Chevrolet Chevy LS1 LS3 LS2 LSX LT Engines 551696 Bolt Kit Only Silver

  • Hex Flange Bolts LS Exhaust Flange Manifold Header Zinc Plated.
  • Compatible with GM Chevrolet Chevy LS1 LS3 LS2 LSX LT Engines 551696 Bolt Kit Only Silver.
  • GM LS / LT Engines (Gen III, IV, V). USA Grade 10.9 with LS Exhaust Manifold Bolts.
  • Zinc-Plated and 350 Header Gasket Set with Bolts.
Check Stock

Pop Rivets 3/16 Inch Diameter #6 LF All Steel Large Flange Blind Rivets 6-8LF 3/16 x 1/2 Grip 0.376-0.500 Qty 250

  • Open End Large Flange Dome Head Pop Rivets.
  • Drill (Hole) Size: #11 Bit, (0.192 - 0.196).
Check Stock

2 Chrome Push Through 4.25 Center Caps for Auto, Truck, Trailer Wheels and Rims

  • Contents: Two chrome 4.25 inch center bore push through center caps by TYK Industries.
  • Material: Chrome plated cold forged steel.
  • Style: Closed end with 2.35 inch recess for logo sticker.
  • Cap Width: 4.23 inches for a wheel with a 4.25 inch center bore. Width of bottom flange is 4.5 inches. The flange holds the cap in place when the cap is pushed through the back side of the wheel..
Check Stock

M10 x 1.5mm Flange Nuts, binifiMux Diameter 10Pcs Serrated Hex Flange Lock Nuts 304 Stainless Steel

  • Made of 18-8 (A2) stainless steel 18-8 which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments..
  • Serrations help grip the material surface for easy installation and provide mild vibration resistance..
  • Nuts Height: 0.17 inch, Flange Diameter: 0.42 inch.
Check Stock

Genuine Sales 4PCS fit VW Wheel Center Caps Cover, 65mm Rim Center Hub Caps for VW

  • Contents: Four chrome 3.195 inch center bore push through center caps by TYK Industries.
  • Material: Chrome plated cold forged steel.
  • Style: Closed end with 2 inch recess for logo sticker.
  • Cap Width: 3.17 inches for a wheel with a 3.19 or 3.195 inch center bore. Width of bottom flange is 3.3 inches. The flange holds the cap in place when the cap is pushed through the back side of the wheel..
Check Stock

Caliper Tool Disc Brake Spreader, Auto Car Disc Brake Pad Spreader Separator Piston Auto Caliper Hand Tool

  • [6mm Thick Tip]-The tip of the flange spreader is only 6mm thick, so it can quickly separate. As long as the socket is larger than the opening, it can be separated in any case. And the maximum spreading distance is 81mm, which provides more space for operation..
  • [14T Separating Force]-The thick cylinder has good air tightness, does not leak oil, and can provide enough pressure. The maximum separation force of the flange separator reaches 14T, and the oil volume is 70ml, which can easily work..
  • [Industrial Grade Quality]-The clamp head of the product is forged from alloy steel, processed by heat treatment, sturdy and durable, with strong tension. The chrome-plated cylinder is anti-corrosion and anti-rust..
  • [Portable & Comfortable]-This Integral flange separator has no need to be used with a hand pump, which is convenient for you to operate and carry. And this item was packed in iron box to avoid the damage of shock and drop..
  • [Professional Application]-The separation tool is mainly used for pipeline maintenance, debugging, replacement and disassembly of flanges, elevator rescue, fire rescue and places that need to expand and separate objects..
Check Stock

Watco Manufacturing, Chrome Plated 48400-CP NuFit Lift and Turn Trim Kit

  • Does Not Require Existing Cross Bars In Old Drain.
  • The product is manufactured in United States.
  • Requires a minimum I.D. opening size of 1.39-Inch and at least 0.39-Inch of depth clearance.
  • Maximum O.D. coverage of flange is 2-7/8-Inch.
  • Lift and Turn kits do not require crossbars in previous strainer body.
  • Stopper screws into crossbars in the NuFIT strainer body.
  • Brass body fits into existing strainer body secured with provided silicone adhesive.
Check Stock

Proline Frost Proof Sillcock 1/2 " Copper,12 " L,3/4 " Mht Chrome Plated

  • Prevents outside faucet freezing. Chrome-plated brass body and tube. Lead-free silver solder construction. Built-in lock-shield. 3/4" hose thread outlet..
  • The sillcock drains automatically upon water shut off, if the hose is removed or open. 1/2" nominal copper sweat or 1/2" M.I.P. Import. The sillcock drains automatically upon water shut off, if the hose is removed or open..
  • 1/2 in MIP x 1/2 in Sweat. Heavy chrome plated brass, silver soldered construction. Notched flange for stable installation. Chrome plated casting and tube, lock shield, 3/4 in hose thread outlet, heavy cast iron handle..
  • Pipe threads comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, solder connections comply with ANSI B16.18. CSA certified ANSI/NSF 61-9. UPC coded. Bulk handy carton..
  • Prevents outside faucet freezing. Chrome-plated brass body and tube. Built-in lock-shield. 3/4in hose thread outlet. The sillcock drains automatically upon water shut off, if the hose is removed or open..
Check Stock

PZRT 10pcs M6 x 20mm Hammer Head Bolt T Screw, 10pcs M6 Hexagon Flange nut Set, Carbon Steel Nickel Plated, for 3030 Series European Standard 8mm T-Slot Aluminum

  • 3030 Series European standard Aluminum Profile Accessories widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
  • M6 Hexagon Slip Locking Flange Nuts made from high quality carbon steel,surface is plated with nickel for good rust resistance and better performance high hardness and a long service life.
  • Flange nut is a nut that has a wide flange at one end that acts as an integrated, non-spinning washer,the serrations help in avoiding vibration of nut and increase the holding power of nut.
  • High Quality Carbon steel M6 x 20mm T Screw Bolt Screws Surface chrome finish Anti-corrosion,rustless,non-pollution and high-hardness.
  • T-shaped screws are used for aluminum profile design, suitable for standard 8mm T-slot 30 European standard aluminum profiles.
Check Stock

binifiMux M14-2.0mm Pitch Serrated Hex Flange Lock Nuts 304 Stainless Steel 6 Pieces

  • FUNCTION: These rugged, high-performing nuts provide a secure and solid grip on your stock that won’t come loose or rotate during heavy torque or vibrations..
  • FEATURES: The serrated flange on the nut acts as an integrated washer, effectively spreading out and distributing pressure evenly at the site. The serrated flange, by biting into the stock, maximizes resistance to secure a dependable, vibration-resistant lock that won’t move..
  • POTENT BUILD: Constructed of zinc-plated carbon steel that ensures durability, lasting use and wear resistance. Precision machined for accurate dimensions and clean, sturdy threads..
  • APPLICATION: Great for anytime you need a locked in, non-rotating fastening. Suitable for use in heavy vibration environments, when fastening on uneven mating surfaces, or when the attachment hole is uneven or too large..
Check Stock

72Pcs M5 M6 M8 Hammer Head Bolt T Screw and M5 M6 M8 Hexagon Flange Nuts Set Carbon Steel Nickel Plated for 20 30 Series European Standard T-Slot Aluminum Profile

  • Package include:Hexagon Flange Nuts:M5,16PCS.
  • M6,20PCS.Hammer Head Bolt T Screw:M5 x 12mm,8PCS.
  • High Quality Material:Flange nuts and high quality carbon steel T-bolts are made of 304 stainless steel with good corrosion and rust resistance, high hardness, no pollution and long service life..
  • Advantage:Flange nut serration helps to avoid the vibration of the nut and increase the holding force of the nut.Hammer head bolt T screw, high quality nickel plated carbon steel, rust and corrosion resistant..
  • Wide Application : Suitable for building 3D printers, 3D engraving machines, CNC milling machines, CNC laser cutting machines, CNC plasma cutting machines, robot projects, machine guards, workstations, etc..
  • High Quality Service : High Quality Service:Please contact us for any questions or concerns you have,We hope shopping with us is a great experience for you,Thanks for visiting us!.
Check Stock

Eastman 35002 22-Gauge Thick Brass P-Trap 1-1/4-inch with Flange for Tubular Drain Applications, Polished Chrome

  • BATH AND KITCHEN P-TRAP: P-trap is designed for use in tubular drain applications.
  • P-trap plays the important role of collecting debris from the sink drain, which would otherwise clog the entire plumbing system if it would pass through.
  • UNIVERSAL: P-traps are up to code and widely used in under sink installation for kitchens and bathrooms.
  • DURABLE: Bathroom P-Trap is constructed of 22-gauge chrome-plated brass for longer-lasting use, and has a high resistance to heat.
  • EASY TO INSTALL: Plumbing fittings feature a slip joint connection and an included flange for easy installation.
  • SPECS: Eastman’s 22-gauge P-Trap with Flange is designed for use in tubular drain applications, and features a 7-1/2 inch wall extension.
Check Stock

1/4-20 Rivet Nuts Large Flange Blind Threaded Insert Grip Range 0.165-0.260 - Zinc Plated Carbon Steel Flat Head Nutsert Rivnut Quantity 25 RoHS Compliant - by Newport Fasteners

  • Flat Head Thin Nut Large Flange Round Body Linear Knurles Threaded Insert - 1/4-20 UNC Thread Size / Grip Range (min-max) .165-.260.
  • Ideal Rivet Nut for Panel Thicknesses from .165-.260 inches (Grip Range .165-.260).
  • Large Flange Thin Knurled Body Thin Wall Series.
  • Material: Zinc Plated Carbon Steel used for general purpose applications with higher temperature resistance.
  • Open End Round Rivet Nut with Linear Grooves and a Flat Head Style (most popular) - provides a good bearing area for application and for bolted on parts.
Check Stock