Categories

Best Plc Controller

Xiuxin 2pcs 5V 8 Channel Relay Module Board for Arduino PIC AVR DSP ARM

  • 2pcs/lot 8 Channel relay module board, Working voltage: 5V.
  • This board is for Arduino PIC AVR DSP ARM.
  • Support all single-chip microcomputer control,Industrial circle,PLC controller,Household intelligent control.
  • Relay output maximum contact is AC250V 10A and DC30V 10A.
  • Widely used for all MCU control, industrial sector, PLC control, smart home control..
Check Stock

Hoverboard Morning

  • Motor Speed Controller Brushless Controller with Hall-less.Full SMD process,stable performance,humanized design, interface all adopts terminal blocks..
  • "Voltage 5-50V high power 380W DC three-phase high-speed brushless sensorless controller. ".
  • Standard heat sink,onboard speed regulating potentiometer，you can use it when you have power on..
  • DC three-phase high-speed brushless sensorless controller recognizes PWM signal input, amplitude 3-5V supports PLC0-5V analog quantity, input control.
  • "Size-Length 63MM * width 45MM * height 31MM,Over-temperature protection:yes (half the over-temperature power) Maximum speed:224000 RPM (2 pole motor),74000 RPM (6 pole motor),40000 RPM (12 pole motor), 35000 RPM (14 pole motor).".
Check Stock

WSDMAVIS 2Pcs PWM to Voltage Module 0% -100% PWM Converted to 0-10V Voltage Digital Analog Signal Converter for PLC Signal Interface Switching

  • The PWM transfer voltage module LC-LM358-PWM2V converts the PWM digital signals into 0 to 10V analog signals.Allowable error:5%..
  • It can be used as signal interface switching for PLC or other industrial control boards. The output voltage is regulated by adjusting the duty ratio of the PWM..
  • The modules are small in size and easy to use in different places.Easy to operate, fine tuned by potentiometer..
  • MCU embedded technology.Work Voltage:DC 12V-30V(Power requirements:> 100MA).
  • Select the PWM signal input level range through short-circuit.The peak of 4.5V to 10V level. The short cap install in ‘5V’. This level is used for normal controller or 5V MCU.
  • The peak of 12V to 24V level, so inserted in 24V. The short cap install in ‘24V’. This level is used for normal PLC controller..
Check Stock

FX1N-14MR Industrial Control Board PLC,DC24V,Programmable Logic Controller Relay Output,Supports for GX-Developer, GX-work2,HMI Connection.

  • FX1N-14MR: Programmable controller with industrial-grade 32-bit MCU, strong anti-interference capability, faster speed, high-quality chip, stable performance, 8 inputs and 6 outputs, online monitoring, online download storage, automatic failure after power on..
  • MR RELAY TYPE: does not support pulse, can be connected to 24V DC load, maximum output current 5A..
  • PLC CONTROLLER: programming port is the port for program upload, download and hmi communication. The program is written in ladder logic programming language, and supports gx-developer, gx-work2 and hmi connection..
  • WIDE RANGE OF APPLICATIONS: It can be flexibly applied to various industrial automation control occasions such as printing, chemical, building materials, packaging, textile, metallurgy, etc..
  • INDUSTRIAL CONTROL BOARD: no analog output, no pulse output, no support for floating point, no support for stepper motor. Support the connection of text screen and touch screen. The baud rate of plc is 9600..
Check Stock

RioRand 400W 6-60V PWM DC Brushless Electric Motor Speed Controller with Hall

  • 1.Humanized design,the interface adopts binding posts,standard heat sink,integrated speed regulating potentiometer on the board,it can be used when the power is on,save time and effort..
  • 2.Full patch technology,stable performance,with forward and reverse, brake function.Electric Motor Speed Controller Brushless Controller with Hall..
  • 3.Wide voltage 6-60V high power 400W DC three-phase brushless with Hall controller..
  • 4.High-power 400W DC three-phase brushless with Hall controller, support PLC 0-5V analog control, support PWM control, amplitude 2.5-5V.
  • 5.There are three relatively thick phase wires on the motor, and there are also three phase wire interfaces on the driver board. They are marked with the characters of MA, MB, MC and other similar characters, and they are also connected respectively..
Check Stock

Isolation Amplifiers Isolated Modulator (5 pieces)

  • ➤【DC12-32V】- This isolation module need two complete independent DC12-32V power supply..
  • ➤【Main function】- Main function is input 0-10V analog voltage signal,after isolation, output 0-10V analog voltage signal..
  • ➤【Scope of Application】- Used to isolate high voltage or strong interference voltage or current (voltage) signal then transferred to PLC or controller MCU, isolating controlling end and controlled end, to assure stability and anti-interference ability of system..
  • ➤【Use】- It will has better performance if install this module and controller in a metal box and box is grounded..
  • ➤【Note】- The potentiometer is used to amend corresponding relation of output voltage. Output voltage can be fine adjusted and calibrated, normally it has already been calibrated..
Check Stock

DC 24V PLC Control Programmable Logic Controller FX1N-24MR Industrial Control Board 14 Input 10 Output 24V 5A PLC Transistor Output

  • High Performance: This PLC industrial control board can support connecting text screen and connecting touch screen, which is stable and reliable..
  • Premium Quality: This PLC industrial control board is made of high quality electric component, which has reliable quality and long service life..
  • Compact Size: This PLC industrial control board has a compact small size, which is portable and easy to operation..
  • Wide Application: This PLC industrial control board is mainly used in a variety of industrial automation control applications..
  • High Speed Input and Output: This PLC industrial control board is high speed 16 Input 16 Output..
Check Stock

DaFuRui 2Pack Upgraded 6V-90V 15A DC Motor Pump Speed Controller，16KHZ PWM Speed Controller Regulator Module Board with Speed Control Knob (6V-90V 15A DC Motor)

  • ★Upgraded 6V-90V 15A DC Motor Pump PWM Speed Controller and PLC voltage can be directly controlled..
  • ★Its own power supply reverse polarity protection, control voltage over-voltage protection, 20A fast-blow ceramic fuse..
  • ★Adjust the order of the cable to change the orientation，can control motor speed to change from 0 percent to 100 percent..
  • ★Adjust the knob of potentiometer to change the output occupying Vacancy proportion of controller, and the motor speed will change..
  • ★Rated Current: 8A, Max Current: 15A, Quiescent Current: 0.005A (Standby)..
Check Stock

(5-Pack) 3V 1100mAh 1747-BA Replacement PLC Battery for FDK CR14250SE, AB Allen Bradley 1769-BA, 1756-BA1, A-40063-043-01, TL-2150/C, 1746-BAS, 1747-PT1, SLC-5/01/02/03/04/05, SLC-500 Series Controls

  • GREAT REPLACEMENT FOR: Allen Bradley: 1746-BA, 1746BAS, 1747-BAS, 1747-L20, 1747-L30, 1747-L40, 1747-L511, 1747-L514, 1747-L524, 1747-L531, 1747-L532, 1747-L541, 1747-L542, 1747-L543, 1747-L551, 1747-L552, 1747-L553, 1747-PT1 HHT, 1747BA, 1747PT1, 1769-BA, 1769-BA2, 1775, 1775 SERIES, 1775-L3, 1775-L4, 1775-ME4 SERIES A, 1775-ME8 SERIES A, 1775-MEA SERIES B, 1775-MED SERIES B, 1775-MEF SERIES A, 1775-MS4 SERIES A, 1775-MS8 SERIES A, 1775-MSA SERIES B, 1775-MSD SERIES B, 5/02, 5/03, 5/04, 5/05.
  • USED IN: A wide variety of Industrial Robot / Process Control Applications as well as Industrial and Logic Controller Applications..
  • PLC BATTERY BENEFITS: Low self discharge rate gives this cell a 10 year shelf life. Stable voltage broad temperature range. High energy, high reliability back up power source..
  • CONNECTOR TYPE: This PLC computer battery backup comes built with a wire lead and connector that were constructed with high-quality, durable materials that are built to last..
Check Stock

0-10V Signal Isolation Module, S-10V10V Analog Quantities Voltage Signal Isolation Module for PLC/MCU Isolating High Voltage or Current (Voltage) Signals

  • ➤【DC12-32V】- This isolation module need two complete independent DC12-32V power supply..
  • ➤【Main function】- Main function is input 0-10V analog voltage signal,after isolation, output 0-10V analog voltage signal..
  • ➤【Scope of Application】- Used to isolate high voltage or strong interference voltage or current (voltage) signal then transferred to PLC or controller MCU, isolating controlling end and controlled end, to assure stability and anti-interference ability of system..
  • ➤【Use】- It will has better performance if install this module and controller in a metal box and box is grounded..
  • ➤【Note】- The potentiometer is used to amend corresponding relation of output voltage. Output voltage can be fine adjusted and calibrated, normally it has already been calibrated..
Check Stock

TIME Mark 258B 3-Phase Monitor 258B240VAC

  • MAIN FUNCTION: Used for industrial-grade 32-bit MCU with strong anti-interference and faster speed..
  • PRACTICALITY: High quality chip, stable performance, on-line download, on-line monitoring, automatic save when power off..
  • MULTIPLE USES: Widely used in all kinds of industrial automatic control, such as metallurgy, chemical, plastics, textile, food, packaging, printing, building materials, carpentry, central air conditioning, environmental protection equipment and industrial single process control equipment in industrial assembly line, various kinds of machine tools..
  • EASY TO USE: Programmable logic controller is reusable, stable, easy to learn. The PLC transmission baud rate is 9600..
  • SIZE: Approx. 86 x 73 x 20mm / 3.4 x 2.9 x 0.7inch.
Check Stock

Texas Instruments SN74HC04N CD74HC04 74HC04 Hex Inverters DIP14 10 Pack

  • ✊【Easy to Use】Our products is a high-quality PLC Programmable Controller, and built to strict quality control standards, as a artistic appearance and simple structure, it all 10 ports use photoelectric isolation to transmit signals, which can effectively filter out various interferences, the input supports positive/negative triggers, very friendly to novices..
  • ✊【Good Performance】Our products has Using 32‑bit industrial processors, small PLCs suitable for industrial automation applications. Besides, it has high‑speed counter function, comes with analog input and output channels, supports 2 channels of 100K high‑speed pulse output..
  • ✊【Strong Applicability】ThisPLC Programmable Controller has Compatible with most commands of FX3U, support for GXworks2/GxDeveloper programming, with independent programming port, which can help you in many areas..
  • ✊【Wide Application】Our power circuit adopts anti‑reverse and anti‑surge design, which is widely used in the signal acquisition and control of industrial field equipment..
  • ✊【Use it with Confidence】You can use our product with confidence, this lathe keeps guaranteed quality after many inspections before leaving the factory..
Check Stock

Simlug Programmable Logic Controller, Dc24V Fx1N14Mr Industrial Control Board PLC Programmable Logic Controller Relay Output

  • It supports super encryption, as long as input the keyword 11111111 under PLC state, there is no read function, only can download program in order that user program cannot be cracked.
  • The PLC adopts strong anti-interference industrial-grade 32-bit MCU, and supports for GX Developer and GX Works2.
  • Widely used in all kinds of industrial automatic control, such as metallurgy, chemical, plastics, textile, food, packaging, printing, building materials, carpentry, central air conditioning, environmental protection equipment and industrial single proces.
  • The PLC board directly uses GX programming software for ladder diagram, written to the PLC directly, can monitor online.
  • Comprehensive and systematic anti-interference processing, power supply circuit has multiple anti-interference design and can work in adverse electromagnetic interfere environment.
Check Stock