Categories

Best Plunge Roundover Router Bits

SpeTool Spiral Router Bits with UpCut 4 inch Extra Long1/4 inch Cutting Diameter 2 inch Cutting Length CNC Router Bit Carving Tool

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Router Bits UpCut 1/4 inch Cutting Diameter 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Woodwork Mortise Slot Carving Engraver

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dados with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut, Carving

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

Andis Blade Care Plus Jar

  • Professional Flush Trim Router Bit with Top Bearing: 1/4” Shank, 1” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use..
  • INDUSTRIAL QUALITY UPCUT FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coated. And Nano Blue Coating with high hardness and heat resistance enables the tool’s cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Up to 2.5X longer life compared to uncoated bits..
  • The 1/4-Inch flush trim Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp..
  • The spiral router bit suit for CNC router and any plunge routers with 1/4″ collet..
Check Stock

EANOSIC Upcut Spiral Router Bit 3-Flute with 1/2” Shank, Extra Long (4 inch), 1/2” Cutting Diameter, 2” Cutting Length, Carbide CNC Router Bits End Mill for Wood Mortises Carving Engraving

  • Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • PREMIUM QUALITY: The spiral upcut router bits Made of solid carbide (Tungsten steel), it is high-wearable and has a long life. You can decrease the times of changing cutters, save production time..
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits..
  • The router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock

WEN RT6033 15-Amp Variable Speed Plunge Woodworking Router Kit with Carrying Case & Edge Guide

  • Powerful 15-amp variable speed soft start motor provides speeds from 8, 000 to 23, 000 RPM.
  • Plunging base locks in downward position for functionality as both a plunge and a fixed Router.
  • Accepts both 1/4 and 1/2-inch Router bits with a plunge depth of up to 2-3/8 inches.
  • 7-Stop turret combined with both macro and micro-adjustment dials maximize precision.
Check Stock

Lotos ER001 Electric Plunge Wood Router with Edge

  • ...allows users to choose a more appropriate speed for different materials..
  • 【Precise Operation】7-stop turret combined with both macro and micro-adjustment ensures precise operation for a range of cabinetry and woodworking applications. Accepts 1/4 inch router bits with a plunge depth of up to 2” inches..
  • 【Both a Plunge and a Fixed Router】Plunging base locks in downward position for functionality as both a plunge and a fixed router.【Durable Housing & Clean Jobsite】The aluminum body and base design is built for long term durability.
  • while the hood removes dust to leave a clean work space..
  • 【Ergonomic Design】Rubber covered handle for a comfortable grip.
  • an External brush cap, making it quick and easy to replace the carbon brush.
  • The quick locking system for convenient depth adjustments and base change..
  • 【What’s Included】1 * multi-function straight-edge fence, 1 * template guide, 1 * roller circle-cutting centering pin, 1 * 1-1/2-inch dust collection duct. 【Warranty】30 day refund and one year replacement..
Check Stock

Bosch Parts 2610915125 Insert Ring Set

  • Robust variable-speed palm Router construction – Made to provide precision and power with a 1.25 horsepower (max.) Motor, advanced electronics, high-performance bases & Proven ergonomics.
  • Powerful 1.25 HP (max), 7.0 amp motor – delivers abundant power for routing and trimming applications.
  • Ground-breaking fixed-base depth-adjustment system – ensures precise depth adjustment.
  • Rugged fixed base 360° (non-split) aluminum base housing with wide-bit capacity — Accepts bits up to 1-5/16 in. Wide.
  • Smooth-action plunge base – provides a spring-lock plunge control lever for easy plunge action.
Check Stock

EANOSIC Spiral Router Bits Up Down Compression Bit 1/2 inch Cutting Diameter with Nano Blue Coated 1/2 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters Extra Long 4”

  • UP & DOWN cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/2 inch cutting length, 4 inch for total length.
  • SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat....
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles....
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for....
  • The compression router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock

EANOSIC Spiral Router Bits Up Down Compression Bit 1/4 inch Cutting Diameter with Nano Blue Coated, 1/4 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters for Mills Machines

  • UP & DOWN cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
  • SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches..
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits..
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
  • The router bit suit for CNC router and any plunge routers with 1/4" collet..
Check Stock

Makita RT0701CX3 1-1/4 HP Compact Router Kit

  • ...ient depth adjustments and base removal/installation.
  • Accepts industry standard template guides.
  • Electronic speed control maintains constant speed under load.
  • High visibility base design for improved handling and performance.
  • Base can be removed quickly to install other bases (plunge, tilt and offset).
  • Heavy duty aluminum motor housing engineered for increased durability.
  • Shaft lock for quick and easy bit changes.
  • Durable flat top design for added convenience when changing bits.
  • Non-marring high-durability base insert for increased work piece protection.
  • Ideal for routing small profiles, dovetailing, door hinges and more.
  • 1-3/8 plunge depth capacity for easy penetration into workpiece.
  • Easy-to-use fine depth adjustment with 3 preset depth stops for added precision.
  • Conveniently located plunge lock lever for operator convenience.
  • Removable clear plastic shield helps protect the operator from airborne debris.
  • Sub-base accepts industry standard template guides for convenience.
  • Fits compact routers models RT0700C and RT0701C.
  • Tilt base for routing at different angles (-30° to 45°).
  • Allows different profiles when using the....
Check Stock

Makita RT0701CX7 1-1/4 HP Compact Router Kit

  • ...uty aluminum motor housing engineered for increased durability.
  • Shaft lock for quick and easy bit changes.
  • Durable flat top design for added convenience when changing bits.
  • Non-marring high-durability base insert for increased workpiece protection.
  • 0 - 1-3/8 plunge depth capacity for easy penetration into workpiece.
  • Easy-to-use fine depth adjustment with 3 preset depth stops for added precision.
  • Ideal for routing small profiles, dovetailing, door hinges and more.
  • Conveniently located plunge lock lever for operator convenience.
  • Removable clear plastic shield engineered to reduce airborne debris.
  • Sub-base accepts industry standard template guides for convenience.
  • Fits compact routers models RT0700C and RT0701C.
  • Powerful 1-1/4 HP (maximum) Motor Delivers Improved Performance.
  • Variable speed control dial (10,000 - 30,000 RPM) enables user to match the speed to the application.
  • Smooth rack-and-pinion fine depth adjustment system for more precise settings.
  • Slim and ergonomically designed body for increased co....
Check Stock

Wood Router Tool, Enhulk 6.5-AMP 1.25HP Compact Trim Router for Woodworking, 6 Speeds to 32000 RPM, Kit with Roller Guide, Edge Guide and Dust Hood

  • Ideal wood trim router kit for beginners and DIYers. The tool kit includes router, basic accessories (1/4'' bits ONLY) and guides, everything you need to start right out of the box..
  • Powerful & Sustainable – Ready to meet your various DIY needs, Enhulk Router is weighted only 5lbs but delivers excellent performance via the 6.5AMP motor. Heavy-duty cast aluminum body housing and fixed base are engineered for durability..
  • Adjustable Speed & Depth – Featuring with 6-speeds dial up to 32,000RPM and rack-and-pinion control, the router enables precise roundover or straight cutting on various woods. Further developed by Constant-Response Circuitry for delicate woodworking requiring constant power output..
  • Soft-Starting & Vibration-Reducing – The soft-starting function allows gradually smooth control over power-up phase. Vibration-reducing cast aluminum housing and rubberized handles reduce vibration for increased comfort and control..
  • Easy to Operate & Dust-Free – Functioning with quick-release cam lock system for easy depth adjustments and base assembly. Dust hood is compatible with vacuum for mess-free finish..
Check Stock