Best Plywood For Laser Cutting

12x12 Wood Panels, Unfinished 3mm Birch Plywood Sheets (8 Pack)

Plywood Sheet: Create one of a kind DIY projects, props, and models thanks to this set of 12x12 wood board sheets.
Multi-Purpose: Use the plywood board for laser cutting, woodwork, engraving and painting to make artwork, school projects, wooden toys, model boats, signs, and bird houses.
High Quality: These hobby board sheets are made of quality birch plywood.
Dimensions: Each wood panel sheet measures approximately 12 x 12 inches with a 0.12-inch thickness.
What’s Included: Includes 8 plywood sheets.

Check Stock

Plywood Sheet Board Squares, A Grade, 12 x 12 inch, 1.5mm Thick, Pack of 5 Unfinished Wood for Crafts Basswood by Craftiff

【MATERIAL】: Light, strong, economical with smooth creamy appearance. Composed of basswood surfaces and middle aspen wood layer – multi-ply composition ensures excellent strength and durability..
【QUALITY】: Sanded basswood laminated plywood sheets. and basswood plywood sheet - smooth, dimensions are exact while specific dimensional tolerances are strictly maintained within 5%. A/A grade grain classifications with minimal repairs and knots. E0 Class plywood, strict safety standard, safe for furniture making and domestic use with restricted formaldehyde release..
【DIMENSION & PACKAGING】: Five pieces of 305*305 mm with a thickness of 1.5mm birch plywood. The bundle of birch plywood is nicely protected with thick PE plastic bags to prevent damage during transportation. 100% satisfaction is guaranteed..
【USAGE】: Laser marking and cutting friendly, high workability, and takes paint and varnish well. Ideal for all woodworking or craft projects.
Perfect for aircraft, boat, architectural model making, pyrography, painting, staining and etc..
【DETAILS】: Saw is required for manual cutting, can be polished with sandpaper..

Check Stock

Plywood Sheet Board Squares A Grade 12 x 12 inch 1/4 inch Thick Pack of 5 Unfinished Wood for Crafts Basswood by Craftiff

【MATERIAL】: Light, strong, economical with smooth creamy appearance. Composed of basswood surfaces and middle aspen wood layer – multi-ply composition ensures excellent strength and durability..
【QUALITY】: Sanded basswood laminated plywood sheets. and basswood plywood sheet - smooth, dimensions are exact while specific dimensional tolerances are strictly maintained within 5%. A/A grade grain classifications with minimal repairs and knots..
【DIMENSION & PACKAGING】: Five pieces of 12*12 inches (305*305 mm) with a thickness of 1/4 inch (6mm) birch plywood. The bundle of birch plywood is nicely protected with thick PE plastic bags to prevent damage during transportation. 100% satisfaction is guaranteed..
【USAGE】: Laser marking and cutting friendly, high workability, and takes paint and varnish well. Ideal for all woodworking or craft projects.
Perfect for aircraft, boat, architectural model making, pyrography, painting, staining and etc..
【DETAILS】: Saw is required for manual cutting, can be polished with sandpaper..

Check Stock

1/8\ x 12\ x 20\ Pre-Finished Maple Plywood - Perfect for CNC & Laser Cutting - Cherokee Wood Products (20)

... or any deformation. Tolerance of thickness is 0.5mm.
Environmentally Friendly Materials: Made of natural mahogany wood, the unfinished wood has no harsh chemical smell but the natural wood smell, no worry about emitting any pungent smell gas when laser cutting and engraving on wood planks for craft.
Strong & Durable Plywood: Pack of 6 mahogany wood veneer sheets offer exceptional durability, rigidity, and stability to meet your requirements for different kinds of unfinished wood crafts.
the multi-coated mahogany plywood sheets provide excellent holding power due to high-quality glue.
Wide Compatibility for DIYers: The wood boards for crafts are ideal for staining, painting, cutting, and engraving with a laser cutter and engraver, scroll saw, and craft knife.
xTool craft wood sheets also bring many possibilities for arts and crafts, school projects, and DIY projects, such as kids' wood craft kits & mahogany plywood airplane kits.
Professional Service & Choice: We are dedicated to providing you with premium mahogony plywoods.
it is xTool's mission to help every crafter and craft-lover to create more easily and happily.
if you need any assistance, please feel free to contact us through Amazon message, we will reply to you within 24 hours.

Check Stock

CMT 251.040.07 ITK Industrial Finish Saw Blade, 7-1/4-Inch x 40 Teeth 1FTG+4ATB Grind with 5/8-Inch003c003e Bore

For smooth finish crosscuts on wood and plywood. Good rip cutting..
To be used on portable and cordless circular saws for cutting soft/hardwood and plywood..
0.071 kerf thickness, 0.047 plate thickness, 20° Hook Angle, 1 Flat + 4/20° alternate teeth Grind..
Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
Laser-cut plate features expansion slots to reduce noise and anti-vibration design..

Check Stock

CMT 251.040.08 ITK Industrial Finish Saw Blade, 8-8-1/4-Inch x 40 Teeth 1FTG+4ATB Grind with 5/8-Inch003c003e Bore

For smooth finish crosscuts on wood and plywood. Good rip cutting..
To be used on portable and cordless circular saws for cutting soft/hardwood and plywood..
0.075 kerf thickness, 0.047 plate thickness, 20° Hook Angle, 1 Flat + 4/20° alternate teeth Grind..
Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
Laser-cut plate features expansion slots to reduce noise and anti-vibration design..

Check Stock

TOMAX 8-1/4-Inch 40 Tooth ATB Finishing Saw Blade with 5/8-Inch DMK Arbor

Ideal for cutting applications in softwood, hardwood, chip board or plywood etc..
Hardened steel body to ensure longer cutting life and sharper cutting edge..
Laser-cut anti-vibration Technology reduces noise and extends cutting life..
Faster, smoother and more reliable cutting feeling..
Clean, neat cutting surface with virtually no heat, burrs and sparks..

Check Stock

CMT 251.042.10 ITK XTreme General Purpose Saw Blade, 10-Inch x 40 Teeth ATB Grind with 5/8-Inch Bore

For fast crosscuts on wood and plywood. Good rip cut on wood..
To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood..
0.098 kerf thickness, 0.071 plate thickness, 15° Hook Angle, 1 Flat + 2/15° alternate teeth Grind..
Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
Laser-cut plate features expansion slots to reduce noise and anti-vibration design..

Check Stock

CMT 251.045.12 ITK General Purpose Saw Blade, 12-Inch x 45 Teeth 1FTG+2ATB Grind with 1-Inch Bore

For fast crosscuts on wood and plywood. Good rip cut on wood..
To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood..
0.110 kerf thickness, 0.087 plate thickness, 15° Hook Angle, 1 Flat + 2/15° alternate teeth Grind..
Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
Laser-cut plate features expansion slots to reduce noise and anti-vibration design..

Check Stock

[(The Mark Z. Danielewski's the Whalestoe Letters)] [Author: Mark Z. Danielewski] published on (February, 2001)

SET INCLUDING: Two-fonts style letter and number set comes total 592 pieces of unfinished plywood laser cutting tiles in a rustic wood storage tray, each font has 296 pieces letter&number packed individually in the storage cell ,which contains 5 pieces of numbers from 0 to 9, 6 pieces of Alphabet lettters from A to Z, and extra quantity for more often using letters( A ,E-12 pieces each, D,I,O,N,R,S,T-6 pieces each, C,F,G,H,L,M,P,U-3 pieces each).
DIMENSIONS: The 1/2 inches tall wood pieces measure from the smallest to largest, 0.2 x 0.5 inches to 0.5 x 0.6 inches..
MATERIALS: Laser cutting alphabet letters and numbers are made of premium plywood with smooth surface and light wood natural color.
FEATURES: Using scrabble's letter weighting formula for this small paintable letter set to make your spelling crafts more easier, two different fonts letter and numbers available for homemade decorating and DIY project.
SPELLING CRAFTS: Dorable letters and numbers in small size are pefect for spelling words on your wood plaques,scrapbook pages,memory trays o,shadow boxes,and any other crafting.

Check Stock

Plywood Sheet Board, A Grade, 22 x 12 inch, 1.5mm Thick, Pack of 10 Unfinished for Crafts Basswood by Craftiff

【MATERIAL】: Light, strong, economical with smooth creamy appearance. Composed of basswood surfaces and middle aspen wood layer – multi-ply composition ensures excellent strength and durability..
【QUALITY】: Sanded laminated basswood plywood sheet - smooth, dimensions are exact while specific dimensional tolerances are strictly maintained within 5%. A/A grade grain classifications with minimal repairs and knots..
【DIMENSION & PACKAGING】: Ten pieces of 22 x 12 inches (560*300 mm) with a thickness of 1/16 inches (1.5mm) plywood. The bundle of birch plywood is nicely protected with thick PE plastic bags to prevent damage during transportation. 100% satisfaction is guaranteed..
【USAGE】: Laser marking and cutting friendly, high workability, and takes paint and varnish well. Ideal for all woodworking or craft projects.
Perfect for aircraft, boat, architectural model making, pyrography, painting, staining and etc..
【DETAILS】: Saw is required for manual cutting, can be polished with sandpaper..

Check Stock

Overpeak 10-Inch Table Saw Blade ATB Ultra Fine Finishing 90 Teeth Wood Cutting Circular Saw Blades

▲Material – OVERPEAK saw blades made of tougher tungsten carbide for up to 5x longer cutting life than other saw blades.
▲Low Noise & Cutting Stable – 6 Laser cut expansion slots and 4 Laser-cut stabilizer vents trap noise and vibration, keeping it cool and reducing blade warp.
▲Alternate-Top Bevel Teeth – The 10 inch saw blade with unique tooth design provides straight cuts and cutting smoother.
▲Machine Use – Framing saw blade is great for circular saw, table saw, miter saw. RPM up to 6000.
▲General Usage – The Overpeak 10 inch carbide blade is 90 tooth and suitable for ripping wood, crosscuts wood, plywood, and laminate.

Check Stock

SCULPFUN S30 Laser Engraver with Auto Air Assist Pump & Nozzle, Limit Switchs, 5W CNC Laser Cutter, Industrial Grade Accuracy Engraving Machine, 10 Times Longer Laser Service Life

...ng and turns on automatically when cutting). Save the time and trouble of doing it manually or avoid bad engraving due to mistakes..
Powerful 5W Dual Laser Output: The S30 laser cutting machine combines 2 high-density, sharp laser beams into 1 to cut 5mm balsa wood and 3mm plywood in 1 pass. With high-pressure airflow from the air-assisted nozzle dramatically increases cutting efficiency, cutting more than 5 times faster than without air assist..
Higher Precision Engraving & Cutting: S30 series laser engraving machine adopts extremely sturdy 0.005mm high precision linear slide rail X-axis, and a 0.08mm x 0.06mm ultra-fine compressed spot, making it reach industrial grade engraving accuracy. Achieve detailed and realistic engraved images ..
Smooth Edge & Deeper Cutting: Use air to quickly reduce the surface temperature of the cut object to avoid deformation and discoloration caused by high laser temperature, and powerful airflow to blow away the residue, ensure clean surface and smooth cutting edge, speeding up the cutting process and increasing the cutting depth..

Check Stock