Categories

Best Plywood Hot Press Plate

Edge Supply Maple Wood Veneer Sheet Flat Cut, 24\ x 96\

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, birch wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this birch 3/4” X 50' iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging is great when applied to w....
Check Stock

CMT 251.042.10 ITK XTreme General Purpose Saw Blade, 10-Inch x 40 Teeth ATB Grind with 5/8-Inch Bore

  • For fast crosscuts on wood and plywood. Good rip cut on wood..
  • To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood..
  • 0.098 kerf thickness, 0.071 plate thickness, 15° Hook Angle, 1 Flat + 2/15° alternate teeth Grind..
  • Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
  • Laser-cut plate features expansion slots to reduce noise and anti-vibration design..
Check Stock

CMT 251.045.12 ITK General Purpose Saw Blade, 12-Inch x 45 Teeth 1FTG+2ATB Grind with 1-Inch Bore

  • For fast crosscuts on wood and plywood. Good rip cut on wood..
  • To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood..
  • 0.110 kerf thickness, 0.087 plate thickness, 15° Hook Angle, 1 Flat + 2/15° alternate teeth Grind..
  • Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
  • Laser-cut plate features expansion slots to reduce noise and anti-vibration design..
Check Stock

Mixed Variety Domestic Veneer Pack 5-6 sq ft/9 Sheets Or More

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, maple wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this maple iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging is great when applied to wood, plywood,....
Check Stock

CMT 252.072.12 ITK XTreme Industrial Fine Cut-Off Saw Blade, 12-Inch x 80 Teeth ATB Grind with 1-Inch Bore

  • For fast extra-clean crosscuts and occasional rip as well on wood and plywood..
  • To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood..
  • 0.110 kerf thickness, 0.087 plate thickness, 15° Hook Angle, 1 Flat + 2/20° alternate teeth Grind..
  • Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
  • Laser-cut plate features expansion slots to reduce noise and anti-vibration design..
Check Stock

Cafefuji Pour Over Coffee Glass Dripper with Brass and Wood Base Stand

  • 【Luxury Gold Design & 4-Level Filter System】 The French Press Coffee Maker is elegant and beautiful, it can be a visual enjoyment while making and drinking coffee. The 4-Level Filter System includes 1 spiral plate, 2 stainless steel mesh screens, and 1 cross plate, filtering 99.99% coffee grounds out that you can enjoy the smooth and rich-flavored coffee. We provide 2 additional stainless steel mesh screens for you to add/replace..
  • 【High-Grade Borosilicate Glasses & Food-Grade Stainless Steel】 It can withstand temperatures from -40°F to 300°F, it's HOT & COLD RESISTANT, and refreigrator safe. You can enjoy cups of hot coffe during the winter to warm up, and iced coffee in the summer to feel more energized without worrying about cracking. The Food-Grade Stainless Steel is resistant to heat, wear, and tear, preventing from bacteria growth while being easy to clean and sanitize..
  • 【How to Use & Clean】 First, add coarse ground coffee into the pot, pouring the hot/cold water and stir, waiting for 4 minutes to let the coffee brew. Last, gently and slowly press the plunger down, and Voilà! Your coffee is ready to be served. *Please note that it's harder to press down with 2 screens than 1 screen only.* To clean the filter system, please uns....
Check Stock

Heat Press- Nurxiovo 8 in 1 Swing Away Heat Press Machine 12x15 inches Digital Vinyl Transfer Multipurpose Combo Kit Sublimation Hot Pressing Machine for T Shirts Mug Hat Plate Cap

  • 8 IN 1 HEAT PRESS- Nurxiovo UL Certified 8-in-1 combo heat press can safe and easily transfer colorful pictures and characters onto nearly any....
  • VERSATILE HEAT PRESS MACHINE- Built with heavy duty materials, it is extremely sturdy and well made, ideal for both home and commercial applications.....
  • ADVANCED HEAT TRANSFER- Adopts the latest heating technology, with large 12x15 heating platen, Nurxiovo heat press heats up fast and evenly. The thick....
  • EASY TO USE- LCD control panel controls and shows the temperature and time precisely. Temperature Range: 33- 482 degrees F.
  • COMBO HOT PRESS MACHINE KIT-12"x 15" Heating Plate, 6"x 3" Cap/Hat Heating Element, 5" /6" Ceramic Plate Heating Element, 4.71"x7.48"(9OZ)/....
Check Stock

CMT 251.040.07 ITK Industrial Finish Saw Blade, 7-1/4-Inch x 40 Teeth 1FTG+4ATB Grind with 5/8-Inch003c003e Bore

  • For smooth finish crosscuts on wood and plywood. Good rip cutting..
  • To be used on portable and cordless circular saws for cutting soft/hardwood and plywood..
  • 0.071 kerf thickness, 0.047 plate thickness, 20° Hook Angle, 1 Flat + 4/20° alternate teeth Grind..
  • Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
  • Laser-cut plate features expansion slots to reduce noise and anti-vibration design..
Check Stock

40-6\ x 12\ Labeled Wood Veneer Pieces (20 Square Feet) Exotic and Domestic Marquetry Arts Crafts Pack

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, red oak wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this red oak 2” x 50’ iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging ....
Check Stock

CMT 251.040.08 ITK Industrial Finish Saw Blade, 8-8-1/4-Inch x 40 Teeth 1FTG+4ATB Grind with 5/8-Inch003c003e Bore

  • For smooth finish crosscuts on wood and plywood. Good rip cutting..
  • To be used on portable and cordless circular saws for cutting soft/hardwood and plywood..
  • 0.075 kerf thickness, 0.047 plate thickness, 20° Hook Angle, 1 Flat + 4/20° alternate teeth Grind..
  • Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
  • Laser-cut plate features expansion slots to reduce noise and anti-vibration design..
Check Stock

AKEYDIY Upgraded 8 in 1 Heat Press Machine Digital Combo Multifunctional T-Shirt Printing Sublimation Heat Press Transfer Machine12\X15\Heat Press Machines Printing Machine for T Shirts Cap Mug Plate

  • 【ADVANCED HEAT PRES & DIGITAL CONTROL】-Large screen display, silicone button,counting function.upgraded heat press is more convenient to operate.Intelligent temperature control is more stable, fast printing, high-quality design is more durable, rotating hot stamping is smooth,the large space is suitable for clothes of various materials.
  • 【FAST HEATTING & DOUBLE TUBE】- The heat transfer machine heating more and can make the printing effect better through the double heating tube design, as the temperature difference between the center and the edges is only 5 degrees, which is better than other designs with a difference of 10 degrees.High quality t shirt pressing machine Make transfer work easier.
  • 【360 DEGREE ROTATION &HYDRAULIC SPRING】- With a swing-away and guide rail design, this heat press machine provides a full range press directly and evenly, which guarantees the quality of finished transfers, Any patterns, letters, and pictures can be transferred through the press to meet your creative and personalized needs.
  • 【EXCELLENT QUALITY & SAFE TO USE】- Fahrenheit and Celsius scale are selectable Adjustable (Temperature Range: 104 to 390℉, Time range: 0 to 999s) . Heat press 8 in 1 is very simple to use, even a novice can easily transfer bea....
Check Stock

Edge Supply Walnut Preglued 1\ X 25' Roll Wood Veneer Edgebanding - Iron on with Hot Melt Adhesive. Sanded to Perfection. Easy Application. Made in USA.

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, maple wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this maple 1/2” x 50’ iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging is....
Check Stock

500 Degree Ceramic Flat Iron，Dual Voltage Straightener Iron，1 inch Hair Straightener，Adjustable Temperature Flat Irons for Women，Portable Hair Straightener，2 in 1 Hair Straightener for Thick Hair

  • ... temperature control button, which can control the temperature at 250℉-500℉, making it easier for you to control the temperature of the portable flat iron during use and make an ideal hairstyle..
  • ✂【3D floating plate】: The traditional fixed plate may hook your hair more or less. Our hair straightening irons press plate adopts a new floating plate design. When styling, the floating press plate will not crush your hair. Let your hair slide more flexibly without pulling feeling..
  • ✂【Ceramic flat iron】: This titanium flat iron plate has a ceramic coating on the surface. The heating is rapid and uniform to prevent thermal damage and save more time. When straightening hair or making fluffy waves, ceramic technology can promote the suppleness and luster of the hair, allowing you to create the perfect hairstyle..
  • ✂【Universal voltage】: To allow customers to style anytime, anywhere, we designed a 110-240V dual-voltage. And it is used in different voltage ranges. Whether you are at home or traveling, you can use this flat irons to make hairstyles..
Check Stock