Best Pneumatic Muffler

Mtsooning 10PCS Air Pneumatic Flow Control Mufflers 1/4inch Exhaust Muffler Filters Bronze Thread Hex Brass Silencer Replacement for 1/4 NPT BSL-02

• MATERIAL: The pneumatic Mufflers are made of copper, with high pressure resistant, not easy to rust and trip, providing better noise reduction..
• SIZE: The size of the brass flow control muffler is thread outer diameter: 1/4 inch/12.5 mm.
• thread length: 0.28 inch. Please pay attention to whether the size of the product matches your device before placing an order..
• PRINCIPLE: The sintered exhaust muffler designed in many small holes drilled in the pipe wall, when the air flows through the small holes, gradually changing the frequency of the original airflow, thereby reducing noise..
• APPLICATION: The thread hex brass muffler can be used in air cylinder, solenoid valves, crankcase, gearbox, oil tanks and pneumatic tools, etc..
• PACKAGE: You will receive 10PCS exhaust muffler filters, and if you have any question about our product , please contact us. We are here to serve and support..

uxcell Plastic Pneumatic Muffler Exhaust Air Line Silencer 1/4 PT Black, 8pcs

• Thread Outer Diameter: Smaller 1/4 PT / 12mm.
• Total Size Per Piece: 40.6 x 15mm / 1.6" x 0.59" (H*D).
• Operating Pressure: 1-10.2kgf/cm^2(0-1.0mpa).
• Operating Temperature Range: 0-60 Degree.
• Tube Material: PU/Nylon and Polyurethane.

Mtsooning 10PCS Pneumatic Muffler, 0.37inch Brass Flow Control Silencer, Sintered Air Controller for Cylinders Solenoid Valves Crank Cases Gear Boxes Oil Tanks

• SIZE AND MATERIAL: The diameter of male thread is 0.37inch / 9.5mm.This pneumatic muffler is made of high-quality brass material, resistant to high pressure, sturdy and durable, and has a long service life..
• FUNCTION: Pneumatic muffler silencers are mainly for reducing dynamic noise or cleaning the exhaust air for pneumatic air solenoid valve..
• APPLICATION: Slicencers are widely used for cylinders, air cylinders, solenoid valves, crank cases, gear boxes, oil tanks, pneumatic tools..
• INSTALLATION: This brass flow control silencer is easy to install and konck down..
• THE BEST AFTER-SALES GUARNTEE SERVICE: When you receive these sintered air controllers, the size is not suitable or too small, or the product is damaged.
• please contact us in time, we will give you a refund or resend..

AIRCAT 6330: 18 Gauge High Performance Nibbler 2,500 SPM/RPM Motor

• Smallest Cut Radius: At only 3/16 inch, allowing clean cuts in tight corners.
• "Oversized" Anvil and Punch: Dramatically increases the reliability of these high-wear parts.
• Rear Exhaust Muffler: 360-degree rotational muffler allows exhaust air to be directed as preferred.
• Nibbler: With throttle lever design for comfortable and convenient operation.
• AirCat Line: The most significant advances in the performance of pneumatic power tools.

URBEST® 10Pcs Solenoid Valve Pneumatic Muffler Filter Noise Silencer 1/4\ PT Thread Pneumatic Air Cylinder Accessories

Jiozermi 12 Pcs Air Pneumatic Mufflers Silencer Brass Pneumatic Exhaust Muffler 1/4 NPT Male Air Silencer Fitting

• 【Product Size】: You will receive 12 piece brass muffler. The total length of each muffler is 1.02 inch. The muffler thread size is 1/4 NPT male thread..
• 【Product Material】: The air muffler sintered is made of brass for durable, corrosion resistance, ductility at high temperatures, low magnetic permeability. The operating pressure is up to 300psi and temperature range of 35F to 300F...
• 【Precision Process】: The threaded pipe fittings was made with precision process, which has clear and deep threads to prevent leakage. The hex nut for easy tightening and loosening..
• 【Wide Application】: The pneumatic sintered air used to connect female pipes with same diameters. It apply to for valves, cylinders,oil tanks, air tools and some other systems that need mufflers to clean the exhaust air and reduce..
• 【Buy with Confidence】: Jiozermi feel confident that you'll love our product, that we'll give your money back if you're not thrilled with your purchase within 30 days. Simply contact us to make it right. It's all on us - so there is zero risk to try the product today..

PAGOW Pneumatic Muffler Silencer, 1/8” Male Thread Brass Air Exhaust Muffler Sintered Bronze Mufflers (Pack of 3)

• 【Product Size】: You will receive 12 piece brass muffler. The total length of each muffler is 0.45 inch. The muffler thread size is 1/8 NPT male thread..
• 【Product Material】: The air muffler sintered is made of brass for durable, corrosion resistance, ductility at high temperatures, low magnetic permeability. The operating pressure is up to 300psi and temperature range of 2°C to 150°C..
• 【Precision Process】: The threaded pipe fittings was made with precision process, which has clear and deep threads to prevent leakage. The hex nut for easy tightening and loosening..
• 【Wide Application】: The pneumatic sintered air used to connect female pipes with same diameters. It apply to for valves, cylinders,oil tanks, air tools and some other systems that need mufflers to clean the exhaust air and reduce..
• 【Buy with Confidence】: Jiozermi feel confident that you'll love our product, that we'll give your money back if you're not thrilled with your purchase within 30 days. Simply contact us to make it right. It's all on us - so there is zero risk to try the product today..

AIRCAT 6505 .5 HP 3-Inch Composite Cut-Off Tool 20,000 RPM

• Patented Muffler Technology: Retains power while quiet-tuned exhaust keeps things quiet (86 dBA).
• Compact: Low weight, a compact power tool is easy to handle.
• Cut-Off Tool: Ergonomic handle for the user's ultimate comfort.
• AIRCAT Line: The most significant advances in the performance of pneumatic power tools.

AIRCAT 6520 .5 HP 3-Inch Composite Reversible Cut-off Tool 18,000 RPM Free Speed

• Patented Muffler Technology: Retains power while quiet-tuned exhaust keeps things quiet (88 dBA).
• Wheel Directional Change: Allows operator to change the direction of sparks.
• Cut-Off Tool: Ergonomic handle for the user's ultimate comfort.
• AIRCAT Line: The most significant advances in the performance of pneumatic power tools.

BOSTITCH Crown Stapler, Narrow, 18GA (SX1838K)

• Oil-free operation of the narrow crown stapler requires no regular maintenance and eliminates the risk of oil stains.
• Selectable trigger system of the crown stapler converts from sequential to contact operation.
• Low nail lockout of BOSTITCH stapler prevents dry firing.
• Ultra-quiet rear exhaust with muffler directs air away from the user.
• Reversible belt hook with integrated pencil sharpener.
• Dial-A-Depth control for precise countersinking.
• Pneumatic Stapler Kit Includes: Finish Stapler, 1/4-inch Air Fitting, and Carrying Case.

NEIKO 30096A 3/8\ Air Drill | Composite Reversible Pistol Grip with Keyless Chuck | 90 PSI / 1800 RPM

• [APPLICATION]: Pneumatic drill is suitable for use on wood, composition materials, plastics, masonry, metal, and screws to be the perfect companion to the drill bits in your tool collection..
• [ERGONOMIC]: Compact and powerful tool operates at 1800 RPM and has an easy quick one finger touch side-mounted forward/reverse switch for fast directional changes..
• [QUALITY]: High quality pneumatic rotor and bearings offer smooth drilling operation in garage and construction environments..
• [PORTABLE]: Convenient size, lightweight composite housing handles easily weighing only two pounds and includes a rubber pistol grip to reduce chill, vibration, and hand fatigue..
• [LIGHTWEIGHT]: 3/8 inch no key chuck feature changes bits quickly during high speed drillings without manual tightening hassle..
• [CONVENIENT]: Built-in handle exhaust with muffler connects to air compressors to reduce noise level output for better concentration..
• [SPECIFICATIONS]: Chuck Capacity 3/8”, free speed 1,800 revolutions per minute (RPM), inlet size ¼” NPT, minimum hose size 3/8”, air consumption: 4.0 cubic feet per minute, air pressure: 90 pounds per square inch (PSI)..

KAST 10PCS Compressed Air Pneumatic Mufflers, 1/8\ Male Thread Sintered Bronze Exhaust Muffler Silencer Air Line Fitting (1/8\)

• Product Name ：Pneumatic Brass Muffler 10PCS.
• Maximum Pressure ：300PSI Maximum Temperature ：30℉ -300℉.
• Application ：Steam Boilers, Fans, Heat Pipes,Cylinder, Valve, Reservoir, Air Tool,Compressed Air Pipeline, Etc..

AIRCAT 1058-VXL 1/2-Inch Vibrotherm Drive Composite Compact Impact Wrench 750 ft-lbs

• Power and Performance: 550 ft-lbs of maximum torque.
• Vibrotherm Drive: With new patented AIRCAT design impact wrench mechanism.
• Muffler System: Low noise levels of 85 dBA.
• Impact Wrench: Ergonomic handle for the user's ultimate comfort.
• AIRCAT Line: The most significant advances in the performance of pneumatic power tools.