Categories

Best Pneumatic Oil Drainer

Jackma555 6.5L Pneumatic/Manual Oil Extractor Pump for Automobile Fluids Vacuum Evacuation + Brake Bleeder Hose

  • 【 Work Freely 】 Not limited to places, change oil anytime and anywhere! With the Oil Extractor Pump, you no longer have to lift or crawl under the car to do fluid changing, and there is no mess to clean afterward..
  • 【 2 Operating Modes 】 The fluid evacuator equips with pneumatic and manual mode to fit any condition. The pneumatic mode turns the oil transfer pump into a high-speed oil changer while the manual mode requires no other equipment to use..
  • 【 Speedy Extraction 】 Fast suction and extraction speed of 1.8L /min. The oil changer extracts engine oil in a 4 cylinder car within minutes at pneumatic mode and leaves no mess to clean afterward..
  • 【Wide Application 】 Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable on cars, lawn mowers, boats, jet skis and etc. It is perfect for working on cars in the garage or automobile repair shops..
  • 【 Note】Gasoline, and fluid with high volatility, high corrosion, high alkalinity, high temperature are FORBIDDEN to be applied on the extractor. If there is any problemor concern with our products, please contact us for assistance..
Check Stock

SWANLAKE 6.5 Liter Pneumatic/Manual Fluid Extractor Pump,Oil Changer Vacuum Fluid Extractor,Oil Change & Fluid Change Tool

  • Pneumatic mode and manual mode to fit all situation. The manual mode could be used by itself without any other equipments.The pneumatic mode turns the pump into a high-speed oil changer as long connect with air compressor..
  • 6.5L vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan. also 3.2 feet flex hose and 3 extra dipstick hoses to reach the bottom of the reservoir and suck up all fluid..
  • Fast suction speed of 1.8L/min. The oil change pump extracts engine oil from a 4-cylinder car in a couple of minutes in pneumatic mode..
  • Use this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation..
  • Its a perfect tool for working on vehicles anytime and anywhere.no need to lift up or crawl under the car to drain out the oil.NOTE:fluids with high volatility, high corrosion, high alkalinity and high temperature CANT be used..
Check Stock

VEVOR Grease Pump 10 Gallon 40L Air Operated Grease Pump, 1.3L/Min Pneumatic Grease Bucket Pump, 48-52MPa Portable Grease Pump, 80:1 Ratio Oil Bucket Pump, with Pressure Hydraulic Hose, Grease Gun

  • 【PNEUMATIC GREASE PUMP】 - Capacity: 40 liters (10 gals). Input Pressure: 0.48-0.52 MPA, Output Pressure: 48-52 MPA. Pressure Ratio: 80:1. Oil Volume: 1.3 L/Min. The pneumatic grease pump with high working pressure can inject oil into your vehicle quickly. And the pressure gauge with precise scales shows real-time conditions..
  • 【LARGE CAPACITY STORAGE】 - The main advantages of sturdy material are reflected in high hardness, sturdiness. The large capacity of 40L allows you to put your oil drum directly into the machine. Without having to pour oil multiple times, saving time and energy. And The grease pump is made of chromium-vanadium steel and cast iron to make it more stable..
  • 【360° GUN HEAD & FOLLOW PLATE】 - Rotatable gun head in the grease pump can rotate arbitrarily in multiple directions that meet different orientations' needs without restrictions. A standard metal follower plate is strongly adsorbed and fits the barrel body without air intake and oil leakage, and has strong sealing performance, making it easier to discharge oil..
  • 【EFFECTIVE DETAIL DESIGNS】 - The pneumatic grease pump is equipped with an inverted U-shaped handle and four rollers, easy to operate and transport. Low energy consumption, simple operation, and high ef....
Check Stock

EONLION 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Gear Gearbox

  • Function-10L capacity pneumatic air suction pump will help you quickly change (pump/distribute) the vehicle's ATF oil..
  • Why Need It- Pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy..
  • Advantage- Fluid extractor can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess..
  • Simple Operation-load more fluid at once. Pneumatic operation, easy to suck or pump oil. Equipped with pressure gauge (0-80 psi/0-6 bar), which can accurately read data..
  • Fitment- Suitable for a variety of models, such as compatible with Audi/Benz/BMW/Ford/Mini Cooper/Honda/Hyundai/Infiniti/Kia/Lexus/Nissan/Skoda/Toyota/Porsche/Volvo/Volkswagen DSG/Volkswagen CVT..
Check Stock

FOUR UNCLES Oil Changer Vacuum Fluid Extractor Pneumatic/Manual 6.5 Liter with Pump Tank Remover and Brake Bleeding Hose Convenient Oil Change & Fluid Change Tool No Leaks No Overfills

  • 【2 WAY USAGE】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with..
  • 【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode..
  • 【NO OIL LEFT】 Vacuum Fluid Extractor comes with 5 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 3.28 feet flex hose and 3 extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil..
  • 【Easy to Use】With FOUR UNCLES oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil..
  • 【WORK FREELY】Not limited to places, change oil anytime, anywhere. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers..
Check Stock

Aocoom-QingCang 6.5 Liter Oil Changer Vacuum Transmission Fluid Extractor Pneumatic/Manual Fluid Evacuator with Pump Tank Remover and Brake Bleeding Hose Engine Oil Change & Fluid Change Tool

  • 【2 USAGES】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with..
  • 【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode..
  • 【NO OIL LEFT】Vacuum Fluid Extractor comes with 4 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 1*3.5 ft flexible hose and 3 * 3.39ft extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil..
  • 【EASY to USE】With oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil..
  • 【WORK FREELY】Not limited to places, change oil at any time. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers..
Check Stock

BestEquip Portable 20L Grease Pump Set Electric 5 Gallon Air Operated Grease Pump with 20FT High Pressure Hydraulic Hose

  • Pneumatic Grease Pump: Capacity: 20 liters (5 gals).
  • Output Pressure: 30-40 MPA. Pressure Ratio: 50:1. Oil Volume: 0.75 L/Min. The pneumatic grease pump has a high working pressure that is capable of injecting oil into your vehicle quickly, perfect for the lubrication and maintenance of various vehicles..
  • 5 Gallon Capacity Storage: Made of chromium-vanadium steel and cast iron, the grease pump features high hardness and sturdiness. The 5-gallon large capacity allows you to put your oil drum directly into the machine without having to pour oil multiple times. The large quantity of oil it can hold will efficiently cut time in half, while also saving your energy..
  • 360° Universal Grease Gun: The gun head in the grease pump can rotate arbitrarily in multiple directions, meeting different positional needs without restrictions.The thickened suction cup can fit the barrel body without air intake and prevents oil leakage. Additionally, it provides a strong sealing performance, making it easier to discharge oil..
  • Refined Details for Effortless Use: The grease pump is equipped with an inverted U-shaped handle and four rollers, making it easy to operate and transport. Moreover, 12.5 ft wire pipe facilitates remote greasing. Buckles on both sides of the barrel....
Check Stock

Kristie's Kitchen Grease Splatter Guard Set - Frying Pan Splatter Screen for Cooking Safely without Oil Splatter Burns - Stainless Steel Oil Splatter Guard Prevents Sizzle Spray & Keeps Kitchen Clean

  • STAY SAFE WHILE COOKING: Our high-quality grease splatter screen for frying pan protects your hands & face from burning hot oil splatter, so you can cook passionately without sacrificing safety!.
  • NOW WITH EVEN BETTER PROTECTION: This rust-free, stainless steel, extra fine mesh frying pan splatter guard set now stops 100% of oil spitting. The splatter guard for frying pan is also dishwasher-safe & easy to clean!.
  • EASILY KEEP THE KITCHEN CLEAN WHEN FRYING: The splatter guards for frying keep your kitchen protected from oil, grease, & boiling water splash, while still letting you cook the way you love cooking!.
  • USE AS STRAINER OR PAN-DRAINER TOO: Each splash guard for frying pan is also a Pot Strainer or Fat Drainer for pans, & features a convenient heat-resistant handhold on each pan lid for extra protection..
  • THREE SIZES OF GREASE SCREENS FOR FRY PANS INCLUDED: An economical set of 3 grease cover for frying pan sizes - 7.88'', 9.84'' & 12.80'', so you have a grease screen for any size pan!.
Check Stock

Happybuy Grease Pump 5 Gallon Electric Grease Pump Air Operated Portable Grease Pump 0.85L Per Min High Pressure Grease Pump

  • Pneumatic Grease Pump: Capacity: 20 liters (5 gals).
  • Output Pressure: 30-40 MPA. Pressure Ratio: 50:1. Oil Volume: 0.75 L/Min. The pneumatic grease pump has a high working pressure that is capable of injecting oil into your vehicle quickly, perfect for the lubrication and maintenance of various vehicles..
  • 5 Gallon Capacity Storage: Made of chromium-vanadium steel and cast iron, the grease pump features high hardness and sturdiness. The 5-gallon large capacity allows you to put your oil drum directly into the machine without having to pour oil multiple times. The large quantity of oil it can hold will efficiently cut time in half, while also saving your energy..
  • 360° Universal Grease Gun: The gun head in the grease pump can rotate arbitrarily in multiple directions, meeting different positional needs without restrictions.The thickened suction cup can fit the barrel body without air intake and prevents oil leakage. Additionally, it provides a strong sealing performance, making it easier to discharge oil..
  • Refined Details for Effortless Use: The grease pump is equipped with an inverted U-shaped handle and four rollers, making it easy to operate and transport. Moreover, 12.5 ft wire pipe facilitates remote greasing. Buckles on both sides of the barrel....
Check Stock

Tuna Strainer Stainless Steel Can Strainer Food Lid Tuna Can Strainer Canning Colander Oil Drainer Tuna Drainer Press Regular Size and Wide Necked Tuna Press Can Filter for Kitchen (Silver)

  • ...nless steel, rust proof, corrosion resistant, solid construction not easy to bend or break, won't discolor or tarnish, which can serve you for a long time.
  • Note: this food can strainer may not be suitable for some pull-top cans of tuna, when you encounter this situation, just turn it over and use it.
  • Appropriate can drainer: the size of our tuna drainer press is approximately 11.5 cm/ 4.52 inches in long, 2.5 cm/ 0.98 inch in high, its inside diameter is approx. 8.2 cm/ 3.23 inches and the external diameter is approx. 9.2 cm/ 3.62 inches, ideal size to meet your various requirements needs, which even fits your drain nicely as a sink strainer.
  • Reliable and convenient to use: the tuna fish drainer is easy to use, and you just need to gently grasp the can handle and then put the foods in our filter.
  • You can easily pour out the unnecessary liquid in tuna, vegetables or other foods and filter it out from the bottom of our canning colander.
  • Regular size and wide necked: the can strainer is suitable for most regular size and wide necked foods that can easily filter anything from tuna to crushed tomatoes.
  • And our can press can filter out the oil or water in canned tuna.
Check Stock

OEMTOOLS 24937 1.5 Gallon 6 Liter Pneumatic and Manual Fluid Extractor Manual and Pneumatic Oil Extractor Fluid Vacuum Extractor Vacuum Evacuator

  • Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid....
  • Double Duty: For pneumatic extraction, insert the suction hose in the engine oil extractor receiving hole.
  • Manually suction fluid with the engine oil....
  • Don’t Cry Over Spilled Oil: The 1.5 gallon reservoir is a solid one-piece tank that can't leak out the bottom.
  • Time Flies: Draining oil from beneath a vehicle takes eons.
  • The oil pump extractor's 5 foot hose and dipstick adapter extracts automotive fluid....
  • Under Pressure: Change transmission fluid anytime with the pneumatic and manual pumping options.
  • This fluid extractor pump works at 85 PSI and a max....
Check Stock

Sta-Lube Air Tool Oil SL2533-1 Gallon, Anti-Corrosive Lubricant for Pneumatic Equipment & Tools

  • STA-LUBE: Sta-Lube offers a range of high performance industrial greases, gear oils, service oils, fluids, hand cleaners, additives, and lubrication formulas. Our products have been rigorously tested to meet the highest quality standards..
  • PNEUMATIC TOOL OIL: This oil is recommended for lubricating pneumatic equipment and tools like impact wrenches, air ratchets, sanders, grinders, air motors, hammers, and drills. .
  • INCREASES TOOLS LIFESPAN: Our anti-corrosive tool oil contains solvents that break down deposits, while the oil lubricates the tool. Preventing rust and corrosion results in an extended lifespan of the tools. .
  • ENHANCES PERFORMANCE: Specially formulated with rust inhibitors, our Sta-Lube Air Tool Oil maximizes your tool's performance. .
  • PRODUCT SPECIFICATIONS: Sta-Lube Air Tool Oil Lubricant is available in a 1 gallon or 3.785 L bottle, and is made in the USA..
Check Stock

WishDirect Tuna Strainer Press, Tuna Can Strainer Food-Grade Stainless Steel Canning Colander for Regular-Size and Wide-Necked Tunas

  • Can drainer strainer press oil or water from tuna cans without messing up your hands, keep fingers clean and scent-free.
  • The tuna strainer for can works great with most regular size & wide necked canned tuna. NOT FIT PULL TOP CANS.
  • Instead of using the can's metal lid to drain, simply place this can strainer over the opening and press..
  • The metal tuna drainer is stronger and more sturdy than plastic canning colander, no chance of breaking.
  • The tuna press strainer is made of food grade 304 (18/8) stainless steel, BPA free, Dishwasher safe.
Check Stock