Categories

Best Pneumatic Oil Filter

Piutouyar 3Pcs Air Pneumatic Mufflers 1/4\ Male Thread Hex Sintered Silencer Brass Exhaust Muffler Filter Air Line Fitting

  • WHAT WILL YOU GET - You will get 3pcs sintered brass filter. Thread size is 1/4". Sintered pneumatic muffler height is 26mm. The max diameter is 15mm. Maximum pressure is 300PSI, max operating temp is 35F to 300F..
  • HIGH QUALITY MUFFLER - Pneumatic exhaust muffler are made of high quality brass, thicker and more durable. Brass silencer is stronger than other materials silencer, it is not easy to rust, wear-resistant, not deformed and anti-corrosion..
  • MULTIPLE USAGE - Pneumatic silencer muffler widely used for air cylinders, cylinders, solenoid valves, crank cases, gear boxes, oil tanks and pneumatic tools. After installing the sintered brass filter, high noise reduction effect, the noise level during the operation of the equipment can be reduced, improve the user's sense of use..
  • PERFECT DISIGN - The compressed air silencer adopts an outer hexagonal design, and you can easily install and remove it with a wrench. Improve your work efficiency and save your precious time and energy. The noise silencer has smooth edges and meticulous workmanship, deeper and smoother threads to ensure quality..
  • QUALITY SERVICE - Thank you very much for your support. Piutouyar provides 30 days return and exchange service. Customer 100% satisfaction is our top priority. If you h....
Check Stock

Medify MA-112 Air Purifier with H13 True HEPA Filter | 2,500 sq ft Coverage | for Smoke Smokers Dust Odors Pet Dander | Quiet 99.9% Removal to 0.1 Microns | Black 1-Pack

  • 225PSI MAX, INDUSTRIAL 3 STAGE AIR CLEANER. 1" NPT INLET AND OUTLET, 11oz METAL BOWLS WITH SIGHT GLASS, WALL MOUNTING BRACKETS.
  • STAGE1: Particulate Filter / Water Trap will remove 95% of initial moisture and contaminents.
  • STAGE 2: Coalescing Filter removes 99.98% of remaining moisture vapor, oil and oil vapor from compressed air lines.
  • STAGE 3: Desiccant Air Dryer removes all remaining moisture and dries out the compressed air downstream to your pneumatic tools.
  • 225PSI Max Output, Replacement Filter Stage 1 ASIN, B01MUDUXU6 .. Replacement Filter Stage 2 ASIN, B01NCZ7452.
Check Stock

3 STAGE INDUSTRIAL GRADE IN-LINE COALESCING FILTER & DESICCANT AIR DRYER COMBINATION WITH METAL BOWLS FOR SPRAY GUN EQUIPMENT PAINT BOOTH COMPRESSOR PLASMA CUTTER 3/4 AUTO DRAIN

  • 3 STAGE, INDUSTRIAL GRADE COALESCING FILTER PLUS DESICCANT AIR DRYER, IN-LINE TYPE FOR COMPRESSED AIR LINES, PERFECT FOR SPRAY OR PLASMA CUTTER APPLICATIONS..
  • 2 BAGS OF DESICCANT BEADS INCLUDED, BEADS GO FROM BLUE TO PINK WHEN TIME TO CHANGE.
  • STAGE 1: PARTICULATE FILTER / WATER TRAP REMOVES 95% OF MOISTURE AND DEBRIS FROM COMPRESSED AIR LINES. 5u MICRON ELEMENT.
  • STAGE 2: COALESCING FILTER / OIL REMOVING FILTER REMOVES 99.98% OF MOISTURE, OIL AND CONTAMINANTS FROM YOUR COMPRESSED AIR LINES.
  • STAGE 3: DESICCANT DRYER TAKES UP TO 5oz OF DESICCANT BEADS TO THOROUGHLY DRY OUR YOUR COMPRESSED AIR LINES BEFORE THE AIR GETS TO YOUR PNEUMATIC TOOLS.
Check Stock

3 STAGE INDUSTRIAL GRADE IN-LINE COALESCING FILTER & DESICCANT AIR DRYER COMBINATION WITH METAL BOWLS FOR SPRAY GUN EQUIPMENT PAINT BOOTH COMPRESSOR PLASMA CUTTER 1/2 AUTO DRAIN

  • 3 STAGE, INDUSTRIAL GRADE COALESCING FILTER PLUS DESICCANT AIR DRYER, IN-LINE TYPE FOR COMPRESSED AIR LINES, PERFECT FOR SPRAY OR PLASMA CUTTER APPLICATIONS..
  • 2 BAGS OF DESICCANT BEADS INCLUDED, BEADS GO FROM BLUE TO PINK WHEN TIME TO CHANGE.
  • STAGE 1: PARTICULATE FILTER / WATER TRAP REMOVES 95% OF MOISTURE AND DEBRIS FROM COMPRESSED AIR LINES. 5u MICRON ELEMENT.
  • STAGE 2: COALESCING FILTER / OIL REMOVING FILTER REMOVES 99.98% OF MOISTURE, OIL AND CONTAMINANTS FROM YOUR COMPRESSED AIR LINES.
  • STAGE 3: DESICCANT DRYER TAKES UP TO 5oz OF DESICCANT BEADS TO THOROUGHLY DRY OUR YOUR COMPRESSED AIR LINES BEFORE THE AIR GETS TO YOUR PNEUMATIC TOOLS.
Check Stock

Air Filter Pressure Regulator Kit Pneumatic Spray Gun Set 1/4 Inch Air Tool Compressor Filter with Gauge, Air Pressure Regulator Gauge + In-Line Oil Water Trap Filter Separator Tool

  • 【Universal Fit】: This air compressor pressure regulator has a standard 1/4 thread will fit most spray guns and airlines.
  • Helps separate solid contaminants such as pipe scale, rust, condensation from airlines.
  • 【Air Pressure Gauge】: Air pressure gauge adds convenience for monitor and adjust the pressure value in real time.
  • The clear filter bowl allows a visual inspection of built up moisture and is removed through a spring loaded valve at the bottom.
  • 【Versatile Purpose】: Air filter pressure regulator prevents water from the airline or compressor contaminating paintwork.
  • 【Lightweight and Durable Design】: 1/4 inch air spray gun pressure regulator, lightweight aluminum alloy design, durable and stable structure.
  • Compact oil water trap filter could be used with air and spray guns.
  • 【Application】: Oil water trap filter separator tool is suitable for paint spray gun and air compressor matched used with gun pneumatic tools and hoses, suitable for vehicle, marine, construction, woodworking, furniture making, paintwork etc..
Check Stock

SUPER HEAVY DUTY HIGH FLOW AIR FILTRATION SYSTEM, 2 STAGE PARTICULATE FILTER PLUS OIL REMOVING COALESCING FILTER COMBINATION (1" NPT, AUTO DRAIN)

  • 1" NPT, HEAVY DUTY INDUSTRIAL GRADE AIR FILTRATION AND IN-LINE AIR DRYER COMBINATION WITH PRESSURE REGULATOR. WITH INTERNAL FLOAT DRAIN (AUTO DRAIN) STAGE 1..
  • 175 PSI MAX INPUT PRESSURE, EQUIPPED WITH 11oz METAL BOWLS, VISIBLE SIGHT GLASSES, PRESSURE GAUGE, WALL MOUNTING BRACKET AND 4 BAGS OF DESICCANT BEADS.
  • STAGE 1: PARTICULATE FILTER/WATER TRAP WITH PRESSURE REGULATOR. 5 MICRON ELEMENT REMOVES 95% OF MOISTURE AND DEBRIS, REGULATOR WILL ADJUST PRESSURE FROM 7 TO 175 PSI.
  • STAGE 2: COALESCING / OIL REMOVING FILTER, EQUIPPED WITH 0.01 MICRON ELEMENT WILL REMOVE 99.98% OF MOISTURE, MOISTURE VAPOR AND OIL THAT MADE ITS WAY PAST STAGE 1..
  • STAGE 3: IN-LINE DESICCANT AIR DRYER WILL DRY OUT THE OUTGOING COMPRESSED AIR LINES BEFORE REACHING YOUR PNEUMATIC TOOLS, BEADS TURN FROM BLUE TO PINK WHEN TIME TO CHANGE..
Check Stock

PSCCO 8PCS Air Pneumatic Mufflers 1/4'' Bronze Exhaust Muffler Silencer

  • Package includes: 5 sintered bronze mufflers, 1 teflon tape.
  • Mufflers utitlize porous sintered bronze filter element secured to standard pipe fittings..
  • Easy to install and maintain, particularly suitable where space is limited. High noise reduction effect..
  • Widely used for Cylinders, Air cylinders, Solenoid valves, Crank cases, gear boxes, oil tanks, Pneumatic tools.
Check Stock

beduan Water Oil Separator Filter 1/4 NPT Male and Female Thread Spray Gun Filters Air Line Compressor Fitting （Pack of 2）

  • Material : Aluminum Alloy ,Plastic. Rust-proof aluminum housing and brass fittings provide additional tool durability..
  • Max operating air pressure is 90 psi（0.62mPA）..
  • Size : Universal 1/4" NPT Inlet and Outlet Thread. Can be connected with spray paint gun, air line fitting, pneumatic tools..
  • Eliminate water, oil, moisture, dust and particulates in the spray gun filter, air compressor line, ensure the dry gas, effectively extend the life of....
  • Clear polycarbonate housing allows you to monitor amount of dirt and debris is being caught to know when to change the filter. Press of the release....
Check Stock

Jackma555 6.5L Pneumatic/Manual Oil Extractor Pump for Automobile Fluids Vacuum Evacuation + Brake Bleeder Hose

  • 【 Work Freely 】 Not limited to places, change oil anytime and anywhere! With the Oil Extractor Pump, you no longer have to lift or crawl under the car to do fluid changing, and there is no mess to clean afterward..
  • 【 2 Operating Modes 】 The fluid evacuator equips with pneumatic and manual mode to fit any condition. The pneumatic mode turns the oil transfer pump into a high-speed oil changer while the manual mode requires no other equipment to use..
  • 【 Speedy Extraction 】 Fast suction and extraction speed of 1.8L /min. The oil changer extracts engine oil in a 4 cylinder car within minutes at pneumatic mode and leaves no mess to clean afterward..
  • 【Wide Application 】 Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable on cars, lawn mowers, boats, jet skis and etc. It is perfect for working on cars in the garage or automobile repair shops..
  • 【 Note】Gasoline, and fluid with high volatility, high corrosion, high alkalinity, high temperature are FORBIDDEN to be applied on the extractor. If there is any problemor concern with our products, please contact us for assistance..
Check Stock

SWANLAKE 6.5 Liter Pneumatic/Manual Fluid Extractor Pump,Oil Changer Vacuum Fluid Extractor,Oil Change & Fluid Change Tool

  • Pneumatic mode and manual mode to fit all situation. The manual mode could be used by itself without any other equipments.The pneumatic mode turns the pump into a high-speed oil changer as long connect with air compressor..
  • 6.5L vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan. also 3.2 feet flex hose and 3 extra dipstick hoses to reach the bottom of the reservoir and suck up all fluid..
  • Fast suction speed of 1.8L/min. The oil change pump extracts engine oil from a 4-cylinder car in a couple of minutes in pneumatic mode..
  • Use this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation..
  • Its a perfect tool for working on vehicles anytime and anywhere.no need to lift up or crawl under the car to drain out the oil.NOTE:fluids with high volatility, high corrosion, high alkalinity and high temperature CANT be used..
Check Stock

VEVOR Grease Pump 10 Gallon 40L Air Operated Grease Pump, 1.3L/Min Pneumatic Grease Bucket Pump, 48-52MPa Portable Grease Pump, 80:1 Ratio Oil Bucket Pump, with Pressure Hydraulic Hose, Grease Gun

  • 【PNEUMATIC GREASE PUMP】 - Capacity: 40 liters (10 gals). Input Pressure: 0.48-0.52 MPA, Output Pressure: 48-52 MPA. Pressure Ratio: 80:1. Oil Volume: 1.3 L/Min. The pneumatic grease pump with high working pressure can inject oil into your vehicle quickly. And the pressure gauge with precise scales shows real-time conditions..
  • 【LARGE CAPACITY STORAGE】 - The main advantages of sturdy material are reflected in high hardness, sturdiness. The large capacity of 40L allows you to put your oil drum directly into the machine. Without having to pour oil multiple times, saving time and energy. And The grease pump is made of chromium-vanadium steel and cast iron to make it more stable..
  • 【360° GUN HEAD & FOLLOW PLATE】 - Rotatable gun head in the grease pump can rotate arbitrarily in multiple directions that meet different orientations' needs without restrictions. A standard metal follower plate is strongly adsorbed and fits the barrel body without air intake and oil leakage, and has strong sealing performance, making it easier to discharge oil..
  • 【EFFECTIVE DETAIL DESIGNS】 - The pneumatic grease pump is equipped with an inverted U-shaped handle and four rollers, easy to operate and transport. Low energy consumption, simple operation, and high ef....
Check Stock

EONLION 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Gear Gearbox

  • Function-10L capacity pneumatic air suction pump will help you quickly change (pump/distribute) the vehicle's ATF oil..
  • Why Need It- Pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy..
  • Advantage- Fluid extractor can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess..
  • Simple Operation-load more fluid at once. Pneumatic operation, easy to suck or pump oil. Equipped with pressure gauge (0-80 psi/0-6 bar), which can accurately read data..
  • Fitment- Suitable for a variety of models, such as compatible with Audi/Benz/BMW/Ford/Mini Cooper/Honda/Hyundai/Infiniti/Kia/Lexus/Nissan/Skoda/Toyota/Porsche/Volvo/Volkswagen DSG/Volkswagen CVT..
Check Stock

FIRSTINFO F3546BENZ 84.4 mm 14 Flutes Oil Filter Wrench for Mercedes-Benz, Dodge and Jeep with 3.0L Diesel Engines

  • 【APPLICATION】This 84mm 14 Flute oil filter wrench is a specially designed removal and installation tool for Mercedes-Benz with 3.0L Diesel Engines, Jeep Cherokee 2007 with 3.0L V6 Diesel Engine, and Dodge Sprinter 2007..
  • 【PERFECT FITMENT】Producing with tight tolerance makes this filter wrench perfect fits with the filter housing to deliver maximum removal torque and prevent the plastic tabs suffer from the improper point of application on them..
  • 【HEAVY DUTY】High-quality aluminum construction for strength and durability rather than some inferior material. Plus, the chrome-plated surface provides corrosion and rust resistance making this a lifelong product..
  • 【MULTI DRIVE】This wrench can be operated with a 3/8” drive ratchet, 27mm socket or adjustable spanner. NOTE: DO NOT use pneumatic tools or electric tools..
  • 【FIRSTINFO ASSURANCE】MADE IN TAIWAN is our pride, and we guarantee premium quality without a premium price. Thus, we provide quality assurance tools with a 12+10 months after-sales warranty (10 months warranty by the register).
Check Stock