Prime-Line K 5034 Screen Door Closer Repair Kit, Zinc Metallics
- Compatible with pneumatic door closer hardware and kits.
- Ideal repair kit for pneumatic door closers.
- This kit includes one short jamb bracket pin that links the door closer rod to the jamb bracket (see model number K 5031).
- This kit includes one hold open clip that slides onto the closer rod of a pneumatic door closer.
- This kit includes one Phillips head speed-adjustment screw which helps set the closer to a desired closing speed.
- This kit includes one tension spring which helps retain tension on the speed-adjustment screw once set.
- Includes adjustment screw, hold open washer, jamb bracket pin and tension screw spring.
Check StockBOSTITCH Crown Stapler, Narrow, 18GA (SX1838K)
- Oil-free operation of the narrow crown stapler requires no regular maintenance and eliminates the risk of oil stains.
- Selectable trigger system of the crown stapler converts from sequential to contact operation.
- Low nail lockout of BOSTITCH stapler prevents dry firing.
- Ultra-quiet rear exhaust with muffler directs air away from the user.
- Reversible belt hook with integrated pencil sharpener.
- Dial-A-Depth control for precise countersinking.
- Pneumatic Stapler Kit Includes: Finish Stapler, 1/4-inch Air Fitting, and Carrying Case.
Check Stock
43300 Pneumatic Fan Clutch Wrench Set Removal Tool Kit Gear Assisted Positioning Tool for Ford GM Chrysler by Lucky Seven
- 43300 Pneumatic Fan Clutch Wrench includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L and 6. 4L Power stroke diesel pickup. 1-7/8"and 2" are still included in the set. 1-1/2" 41mm and 42mm are still available individually..
- 43300 Pneumatic Fan Clutch Wrench Set ，Package included:1 * 43370 handle+1 *43380 32mm driving wrench+1 *43390 36mm driving wrench+1 *43440 40mm driving wrench+1 *43530 47mm driving wrench+1 *43430 7/8" driving wrench+1 *43410 1-7/8" driving wrench+1 *43420 2" driving wrench.
- 43300 Pneumatic Fan Clutch Wrench Kit,43300 pneumatic fan clutch,Fan clutch installer/remover set,Quickly removes and installs fan clutch when repairing the water pump or fan clutch.Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary..
- 43300 Pneumatic Fan Clutch Wrench AKA Fan clutch removal tool kit,43300 pneumatic fan clutch wrench set,for 43300 lisle,43300 wrench set,43300 fan clutch tool,43300 pneumatic fan clutch,for lisle 43300 pneumatic fan clutch wrench set,....
Check Stock
Jackma555 6.5L Pneumatic/Manual Oil Extractor Pump for Automobile Fluids Vacuum Evacuation + Brake Bleeder Hose
- 【 Work Freely 】 Not limited to places, change oil anytime and anywhere! With the Oil Extractor Pump, you no longer have to lift or crawl under the car to do fluid changing, and there is no mess to clean afterward..
- 【 2 Operating Modes 】 The fluid evacuator equips with pneumatic and manual mode to fit any condition. The pneumatic mode turns the oil transfer pump into a high-speed oil changer while the manual mode requires no other equipment to use..
- 【 Speedy Extraction 】 Fast suction and extraction speed of 1.8L /min. The oil changer extracts engine oil in a 4 cylinder car within minutes at pneumatic mode and leaves no mess to clean afterward..
- 【Wide Application 】 Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable on cars, lawn mowers, boats, jet skis and etc. It is perfect for working on cars in the garage or automobile repair shops..
- 【 Note】Gasoline, and fluid with high volatility, high corrosion, high alkalinity, high temperature are FORBIDDEN to be applied on the extractor. If there is any problemor concern with our products, please contact us for assistance..
Check StockBOSTITCH Finish Nailer Kit, 16GA, Smart Point, Pneumatic (BTFP71917)
- Drive 16 GA finish nails from 1-1/4-inch to 2-1/2-inch length with this pneumatic nailer.
- Oil-free operation of the 16 gauge finish nailer reduces the risk of oil stains.
- Tool-free jam release mechanism for easy nail removal.
- Dial-A-Depth control for precise countersinking of nails.
- Selectable trigger system for sequential or contact operation.
- Other features: rear air exhaust, and belt hook with integrated pencil sharpener.
- Kit includes: Nailer, 1/4-inch Air Fitting, Carrying Case, and Extra No-Mar Tips.
- 7-Year Limited Warranty. 1-Year Limited Warranty in production applications.
Check Stock
AmazonCommercial Air Operated Pneumatic Oil Transfer Pump Heavy Duty Double Action 3:1 3.2GPM / 12LPM for SAE130 Oils/Fluids (NOT for Gasoline or Diesel)
- Heavy-duty pneumatic (air-operated) 3:1 double-action oil transfer pump for medium- to high-viscosity fluids and short- to medium-distance applications.
- Provides a high flow rate of up to 3.2GPM (12LPM).
- suitable for SAE130 oils/fluids, including motor oil, synthetic hydraulic oil, gear oil, hydraulic fluid, and automatic transmission fluid (NOT for use with gasoline or diesel).
- Air inlet connection of 1/4-inch and oil outlet connection of 3/4-inch male.
- maximum air inlet pressure of 5-8BAR / 70-115PSI.
- maximum fluid pressure of 24BAR / 350PSI.
- Long pumping life of 221k+ gallons (840k L).
- minimal moving parts in the air motor assembly translate to less downtime and lower repair costs.
- corrosion-resistant design uses stainless steel, aluminum, and chrome on key components for longer life.
- 2-inch adjustable bung adapter for easy installation.
- can be barrel, cart, or wall mounted (wall mount kit or extension tub kit sold separately).
- backed by an AmazonCommercial 1-year limited warranty.
Check Stock
SWANLAKE 6.5 Liter Pneumatic/Manual Fluid Extractor Pump,Oil Changer Vacuum Fluid Extractor,Oil Change & Fluid Change Tool
- Pneumatic mode and manual mode to fit all situation. The manual mode could be used by itself without any other equipments.The pneumatic mode turns the pump into a high-speed oil changer as long connect with air compressor..
- 6.5L vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan. also 3.2 feet flex hose and 3 extra dipstick hoses to reach the bottom of the reservoir and suck up all fluid..
- Fast suction speed of 1.8L/min. The oil change pump extracts engine oil from a 4-cylinder car in a couple of minutes in pneumatic mode..
- Use this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation..
- Its a perfect tool for working on vehicles anytime and anywhere.no need to lift up or crawl under the car to drain out the oil.NOTE:fluids with high volatility, high corrosion, high alkalinity and high temperature CANT be used..
Check StockDEWALT D55154 1.1 HP Continuous 4 Gal Electric Wheeled Dolly-Style Air Compressor with Panel
- 4 gallon electric wheeled dolly styled air compressor with panel.
- Oil lubricated pump improving durability.
- 4.0 CFM delivered at 90 PSI pump provides rapid recovery.
- 10-inch pneumatic wheel and handle kit for ease of mobility.
- Top load panel with positioning holes allows unit to transport loads up to 100 lbs.
- High-flow regulator for increased performance.
Check Stock
YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank
- ...in plug on the transmission pan. All the 15PCS metal adapters are marked with NO. and well packed in a case, compatible with Ford, BMW, Nissan, Honda, Audi, VW DSG, VW CVT, Skoda, Porsche, Benz, Mini Cooper, Kia, Toyota, Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
- YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy. Pneumatic tool, works with vacuum pump to extract and with air pump to refill, ensuring high efficient and labor-saving.
- Pump assembly incorporates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4" American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hose. 10L big capacity well constructed container, is marked with accurate scale to help observe the amount....
Check Stock
VEVOR Grease Pump 10 Gallon 40L Air Operated Grease Pump, 1.3L/Min Pneumatic Grease Bucket Pump, 48-52MPa Portable Grease Pump, 80:1 Ratio Oil Bucket Pump, with Pressure Hydraulic Hose, Grease Gun
- 【PNEUMATIC GREASE PUMP】 - Capacity: 40 liters (10 gals). Input Pressure: 0.48-0.52 MPA, Output Pressure: 48-52 MPA. Pressure Ratio: 80:1. Oil Volume: 1.3 L/Min. The pneumatic grease pump with high working pressure can inject oil into your vehicle quickly. And the pressure gauge with precise scales shows real-time conditions..
- 【LARGE CAPACITY STORAGE】 - The main advantages of sturdy material are reflected in high hardness, sturdiness. The large capacity of 40L allows you to put your oil drum directly into the machine. Without having to pour oil multiple times, saving time and energy. And The grease pump is made of chromium-vanadium steel and cast iron to make it more stable..
- 【360° GUN HEAD & FOLLOW PLATE】 - Rotatable gun head in the grease pump can rotate arbitrarily in multiple directions that meet different orientations' needs without restrictions. A standard metal follower plate is strongly adsorbed and fits the barrel body without air intake and oil leakage, and has strong sealing performance, making it easier to discharge oil..
- 【EFFECTIVE DETAIL DESIGNS】 - The pneumatic grease pump is equipped with an inverted U-shaped handle and four rollers, easy to operate and transport. Low energy consumption, simple operation, and high ef....
Check Stock
Lubeworks Oil Transfer Drum Pump Double Action 1:1 Fast High Flow Rate 8.5GPM / 32LPM for SAE130 Oils/Fluids
- SPECIFICATIONS - This Air Operated (Pneumatic) Double Action Oil Transfer Pump has a High Flow rate of a Max 8.5GPM / 32LPM.
- A Max Air Inlet Pressure of 5-8BAR / 70-115PSI.
- A Max Fluid Pressure of 8BAR / 115PSI. An Air Motor Effective Diameter of 63mm 2.5" inch.
- An Air Consumption (per minute) @ 8BAR / 130L @ 115PSI / 4.7CFM.
- An Air Inlet Connection of 1/4" and Oil Outlet Connection of 3/4" Male.
- A Long Pump Life of 960k Liters / 253k+ Gallons.
- EFFICIENT DESIGN and CAPABILITIES - Our Transfer Pumps are Double Action and Self Priming designed, delivering fast and precise flow rates.
- This Smart design uses fewer parts for less pump wear/tear, making it is easy to use/maintain This pump is best suited for Multiple Fluid types of medium to high viscosity at a short to medium distance, typical fluids handled include: motor oil, synthetic oil hydraulic, gear oil, automatic transmission fluid and suitable up to SAE80 grade oil.
- PROPER USE & SAFETY - All our pumps come with a 2" inch Adjustable Bung adapter, for easy installation for barrel mounted applications.
- This pump can be barrel, cart or wall-mounted.
- A Wall Mount Kit or Extension Tube Kit are Sold SEPARATELY.
- Follow manual for setup and always use the proper additional equi....
Check Stock
Lubeworks Oil Transfer Drum Pump Double Action 3:1 Fast Flow Rate 7.4gpm / 28lpm for SAE130 Oils/Fluids
- PUMP SPECS - This Air Operated (Pneumatic) Double Action Oil Transfer Pump has a High Flow rate of a Max 7.4GPM / 28LPM.
- A Max Air Inlet Pressure of 5-8BAR / 70-115PSI.
- An Air Motor Effective Dia. of 63mm 2.5" inch.
- An Air Consumption (per minute) at 8BAR / 140L at 115PSI / 5.0CFM.
- Air Inlet Connection of 1/4" inch and Oil Outlet Connection of 3/4" inch Male.
- A Long Pump Life of 840k Liters / 221k+ Gallons.
- EFFICIENT DESIGN and CAPABILITIES - Our Transfer Pumps are Double Action and Self Priming designed, delivering fast and precise flow rates.
- This Smart design uses fewer parts for less pump wear and tear, making it is easy to use and maintain.
- This pump is best suited for Multiple Fluid types of medium to high viscosity at a short to medium distance, typical fluids handled include: motor oil, synthetic oil hydraulic, gear oil, automatic transmission fluid and suitable up to SAE130 grade oil.
- PROPER USE and SAFETY - All our pumps come with a 2" inch Adjustable Bung adapter, for easy installation for barrel mounted applications.
- This pump can be barrel, cart or wall mounted.
- A Wall Mount Kit or Extension Tube Kit are Sold SEPARATELY.
- Follow manual for setup and always use the proper add....
Check Stock
EONLION 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Gear Gearbox
- Function-10L capacity pneumatic air suction pump will help you quickly change (pump/distribute) the vehicle's ATF oil..
- Why Need It- Pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy..
- Advantage- Fluid extractor can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess..
- Simple Operation-load more fluid at once. Pneumatic operation, easy to suck or pump oil. Equipped with pressure gauge (0-80 psi/0-6 bar), which can accurately read data..
- Fitment- Suitable for a variety of models, such as compatible with Audi/Benz/BMW/Ford/Mini Cooper/Honda/Hyundai/Infiniti/Kia/Lexus/Nissan/Skoda/Toyota/Porsche/Volvo/Volkswagen DSG/Volkswagen CVT..
Check Stock
