Categories

Best Pneumatic Piston Rod

MAL Series Aluminum Alloy Mini Pneumaitc Air Cylinder 32mm Bore 75mm Stroke Single Rod Double Acting Air Cylinder with Y Connector and 2Pcs 6mm Pneumatic Quick Fitting

  • Bore: 1 1/4”(32mm) ； Stroke: 3”(75mm) ； Port Size: PT1/8.
  • Piston Rod Type: Single Rod ； OD: Φ12mm ； Action Type: Double Acting；Buffer Type: Adjustable Buffer.
  • Fluid: Air ； Pressure Range: 0.1~1.0MPa(14~145Psi).
  • Material: Aluminium Alloy ；Sealing Ring: Rubber； Working Temperature: -4~158℉.
  • What You Get: 1 Pcs Mini Pneumatic Cylinder ,1 Pcs Y32 Connector, 2 Pcs x 6mm Pneumatic Quick Fitting. 30-Days money back guarantee, 1-Year warranty, 24/7 friendly customer service..
Check Stock

Aluminum Alloy Mini Pneumaitc Air Cylinder MAL20x300 (20mm/0.8” Bore 300mm/12” Stroke) Single Rod Double Acting Air Cylinder with Y Connector and 4Pcs 6mm Pneumatic Quick Fitting

  • Bore: 3/4”(20mm) ； Stroke: 12”(300mm) ； Port Size: PT1/8.
  • Piston Rod Type: Single Rod ； OD: Φ8mm ； Action Type: Double Acting；Buffer Type: Adjustable Buffer.
  • Fluid: Air ； Pressure Range: 0.1~1.0MPa(14~145Psi).
  • Material: Aluminium Alloy ；Sealing Ring: Rubber； Working Temperature: -4~158℉.
  • What You Get: 1 Pcs Mini Pneumatic Cylinder ,1 Pcs Y Connector, 4 Pcs x 6mm Pneumatic Quick Fitting. 30-Days money back guarantee, 1-Year warranty, 24/7 friendly customer service..
Check Stock

YSTOOL Pneumatic Brake Caliper Piston Wind Back Compression Spreading Tool 23PCS Kit Rewind Spreader Air Tool Set to Repair Brake Pad Change Brake Pump for Cars Trucks

  • Brake caliper tool set comes with a brake compression tool and 22 drive key disc adapters, making it a easy job to push the brake caliper piston back without others' help. YSTOOL pneumatic brake pad caliper tool fits for a variety of domestic and foreign vehicles with windback pistons and push back pistons, performing services on many brake repair jobs like brake pump regulating, brake pads replacement, etc..
  • YSTOOL brake tools are compatible with Ford, Alfa Romeo, Audi, BMW, Citroen, Fiat, Alfa Romeo, Honda, Range Rover, Jetta, Jaguar, Subaru, Mazda, Mercedes, Mitsubishi, Nissan, Renault, Saab, Iveco, Toyota, Volvo, VW, etc. Just choose one adapter, connect the brake piston caliper tool to shop air, press air trigger(til the end) and rotate swivel rod to rewind brake piston, then release pressure before tool removal by pressing air release button..
  • Compared with manual brake caliper spreading tool, pneumatic brake caliper tool is more laborsaving, convenient and environment-friendly. Only one tool is needed to satisfy for use with left and right hand threaded pistons by rotating the long swivel handle freely, no need to gather two sets of left and right hand thrust bolt assemblies and waste time to try which one is right. YSTOOL caliper piston re....
Check Stock

Crosman RMCOIL Silicone Chamber Oil (.25-Ounce)

  • Keep your rifle like new with this lubricant specially created for Crosman Spring and Nitro Piston air rifles.
  • Use on your Crosman Nitro Piston Break Barrel.
  • Use on your Crosman Spring-powered Break Barrel.
  • Use on your Crosman PCP (Precharged Pneumatic) Airgun.
Check Stock

MYFULLY Office Chair Cylinder Replacement | Chair Gas Lift Cylinder 5 inch Long Extension Stroke Adjust Universal Size Lift Cylinder Fits Most Executive Chair Swivel Chair

  • Heavy Duty Office Chair Cylinder: The gas lift cylinder holds up to 385lb/175kg on most Swivel chairs. Hydraulic pneumatic shock piston is certified by SGS,high safety and explosion-proof,more durable..
  • 5" Piston Stroke for Adjusting Chair Height: Outer cylinder diameter: 1.9".
  • Smooth Operation & Noiseless: This chair cylinder replacement uses upgrade stainless steel lift rod. Full 360 degree rotation, smooth and noiseless movements to all directions..
  • Universal Chair Cylinder: Our office chair piston will fit most office, executive and computer chairs.(salon chairs, executive chairs, work chairs, rolling stools) on the market..
  • Easy to Install: This office chair cylinder replacement can be installed easily with no additional screws required. Take several minutes to refresh your old office chair and save costs! Package includes: a gas cylinder for office chair.
Check Stock

CGELE Pneumatic Air Cylinder SC 32 x 200mm PT 1/8, Bore: 1 1/4 inch（32mm）,Stroke:8 inch(200mm) Screwed Piston Rod Dual Action

  • ♥Material:Made of high precision aluminum alloy..
  • ♥Each package includes 1 pcs pneumatic air cylinder(SC32×200)，1 pcs Y-joint ,2 pcs PC4-01,pneumatic tubing 5 meter(4×2.5),1 pcs teflon tape..
  • ♥Product parameters:Port size: PT 1/8,piston rod size:M10X1.25,Bore: 1 1/4 inch(32mm), Stroke: 8 inch(200mm)..
  • ♥Feature:New aluminum alloy material, thickened cylinder, surface electroplating treatment, high strength, not deformed, not easy to corrosion, with fine double seal ring, good sealing, long time smooth not jamming not leak, wear-resistant dust..
  • ♥Widly application:Widely used in printing , semiconductor, automation control, robotics, etc..
Check Stock

Allstar ALL96478 Engine Connecting Rod and Piston Holder , Black

  • Engine connecting rod and piston holder measures 24 inch long x 12 inch wide x 9-1/2 inch tall.
  • This combination rod and piston holder safely supports piston and connecting rod assemblies during engine teardowns or assembly.
  • Slots are 4-3/4 inch long x 1-1/2 inch wide to accommodate most piston/rod combinations.
  • Assembly is required and can also be disassembled if desired after use for easy storage.
Check Stock

ACDelco Professional 530-300 Premium Gas Charged Rear Shock Absorber

  • a hardened, chromed piston rod with micro cracks provides an ultra-smooth, self-lubricating, corrosion- and scratch-resistant surface, helping....
  • drawn over mandrel (dom) pressure cylinder for high quality sealing properties and reduced internal friction to assist with longer product life.
  • gas charged for reduced fluid aeration, which can result in better response, less foaming, and more consistent control than non-gas charged shocks.
  • full perimeter, multi-lip, piston rod seal is permanently lubricated and helps keep dirt and contaminates from reaching the interior of the rod.
  • o-ring hydraulic piston seal resulting in minimized piston blow-by and consistent control.
Check Stock

Grease Buster Tools Shop Size Pneumatic Piston

  • A Pneumatic Piston accessory for your Shop Size Grease Buster.
  • Use with a pneumatic hammer to clean clogged grease fittings and bearings with pneumatic pressure.
Check Stock

ACDelco GM Original Equipment 24202583 Automatic Transmission Low and Reverse Band Servo Piston Pin

  • ㋡ Function: The piston pin used to connect the piston and the connecting rod, and transfer the force of the piston to the connecting rod or vice versa..
  • ㋡ Premium Quality: The piston pin made of excellent alloy steel material, reliable quality, high hardness, and durable..
  • ㋡ Application: The piston pin is used to directly replace old or damaged parts to improve performance and efficiency. Such as air compressor..
  • ㋡ Exquisite Craftsmanship: The piston pin smooth surface without burrs, corrosion resistance, not easy to rust, and has strong anti‑oxidation ability in humid environment..
  • ㋡ Specification: Length is approx.80mm / 3.1in, diameter is approx. 20mm / 0.8in..
Check Stock

WISPAUSU Air Brake Caliper Piston Compression Tool Kit 23PCS Pneumatic Brake Pump Adjusting Wind Back Tool Brake Caliper Piston Rewind Tool

  • Air Brake Caliper Tool - 23PCS Pneumatic Brake Caliper Wind Back Tool Kit, perfect for Brake DIY Enthusiasts or Mechanics. Easy to rewind your brake caliper piston with the Pneumatic Caliper Piston Compressor Tool..
  • Easy to Use - The tool attachs the adapter quickly and firmly by its magnetic plate. Easy to turned the windling handle 360-degree clockwise anticlockwise. Press its button to quick release pressure..
  • What You Get - 1pcs air operated brake compressor tool, 22pcs adapters that fit to the piston, and 1PCS hard plastic suitcase. Made of high carbon-steel..
  • Wide Applications - Adapters compatible with most vehicles, such as Alfa Romeo Audi BMW Citroen Dacia Fiat Ford GM Honda Hyundai Iveco Jaguar Lancia Mazda Mercedes Mini Mitsubishi Nissan Opel Peugeot Renault Saab Seat Skoda Suzuki Toyota Vauxhall Volvo VW, etc..
  • 1 Year Warranty - We offer 1 year after-sales service. Your order will get fast delivery by FBA..
Check Stock

ACDelco Professional 530-298 Premium Gas Charged Front Shock Absorber

  • A hardened, chromed piston rod with micro cracks provides an ultra-smooth, self-lubricating, corrosion- and scratch-resistant surface, helping increase seal life.
  • Drawn over mandrel (DOM) pressure cylinder for high quality sealing properties and reduced internal friction to assist with longer product life.
  • Gas charged for reduced fluid aeration, which can result in better response, less foaming, and more consistent control than non-gas charged shocks.
  • Full perimeter, multi-lip, piston rod seal is permanently lubricated and helps keep dirt and contaminates from reaching the interior of the rod.
  • O-ring hydraulic piston seal resulting in minimized piston blow-by and consistent control. Dust Shield.
  • Fits: GMC- 2007 Sierra 1500 Classic, 2001-2004: Sierra 2500 HD, 1999-2006: Sierra 1500, 1999-2004: Sierra 2500.Chevrolet- 2007 Silverado 1500 Classic, 2001-2004: Silverado 2500 HD, 1999-2006: Silverado 1500, 1999-2004: Silverado 2500.
Check Stock

ACDelco Professional 530-189 Premium Gas Charged Rear Shock Absorber

  • A hardened, chromed piston rod with micro cracks provides an ultra-smooth, self-lubricating, corrosion- and scratch-resistant surface, helping increase seal life.
  • Drawn over mandrel (DOM) pressure cylinder for high quality sealing properties and reduced internal friction to assist with longer product life.
  • Gas charged for reduced fluid aeration, which can result in better response, less foaming, and more consistent control than non-gas charged shocks.
  • Full perimeter, multi-lip, piston rod seal is permanently lubricated and helps keep dirt and contaminates from reaching the interior of the rod.
  • O-ring hydraulic piston seal resulting in minimized piston blow-by and consistent control.
  • Fits: Chevrolet- 1988-2003 C3500, 1988-1999: K1500, C1500, 1988-2000: K3500, K2500, C2500. GMC- 1988-2000: K3500, K2500, GMC C3500, GMC C2500, 1988-1999: GMC K1500, GMC C1500,.
Check Stock